Build List
-
Active Filters:
b
![OpenBuilds OX CNC Machine](https://openbuilds.com/data/article_images/l/0/341.jpg?t=1391561605)
Build Author
Mark Carew
Views
1161388
OpenBuilds OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138747
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![Linear Rail CNC Machines](https://openbuilds.com/data/article_images/l/1/1771.jpg?t=1428529929)
Build Author
sgspenceley
Views
184287
Linear Rail CNC Machines
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC build using linear rails & lead screws.
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
110184
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
![GRANITE 1.0](https://openbuilds.com/data/article_images/l/7/7661.jpg?t=1545775857)
Build Author
Michael.M
Views
61311
GRANITE 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
![Embroidery machine with XY belt and pinion drive.](https://openbuilds.com/data/article_images/l/0/691.jpg?t=1398202839)
Build Author
sausagePaws
Views
73110
Embroidery machine with XY belt and pinion drive.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32302
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278374
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
C-BEAM-GTC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a larger C-BEAM CNC Machine with no previous experience.
OX AI
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
5 X 5 Plasma SIMPLE Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds
![WorkBee CNC build - My honest opinion, tips and help](https://openbuilds.com/data/article_images/l/6/6407.jpg?t=1533433899)
Build Author
T4Concepts
Views
72242
WorkBee CNC build - My honest opinion, tips and help
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
![OpenBuilds ACRO System](https://openbuilds.com/data/article_images/l/5/5416.jpg?t=1529678125)
Build Author
Mark Carew
Views
208262
OpenBuilds ACRO System
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/318.jpg?t=1529427874)
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
![Laser V](https://openbuilds.com/data/article_images/l/0/226.jpg?t=1389473225)
Build Author
Robert Hummel
Views
149657
Laser V
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
A rigid and wide format, plate and carving CNC.
![Spartacus Inspire](https://openbuilds.com/data/article_images/l/6/6670.jpg?t=1519708480)
Build Author
MarkM_NJ
Views
18645
Spartacus Inspire
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
36426
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
![DIY Embroidery Machine V2](https://openbuilds.com/data/article_images/l/8/8630.jpg?t=1560204694)
Build Author
sausagePaws
Views
1742651
DIY Embroidery Machine V2
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
![Dash-X 3D Printer: Innovative design](https://openbuilds.com/data/article_images/l/8/8551.jpg?t=1558461111)
Build Author
Neil Rosenberg
Views
35652
Dash-X 3D Printer: Innovative design
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.
Openbuilds Co2 80w Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
HD CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy Duty build with 1605 Ballscrew and Linear Rail
![Prusa i3 Bear Upgrade V2](https://openbuilds.com/data/article_images/l/6/6428.jpg?t=1519671067)
Build Author
pek
Views
77552
Prusa i3 Bear Upgrade V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
![Openbuilds Table Top 50w Co2 Laser Cutter/Engraver](https://openbuilds.com/data/article_images/l/8/8688.jpg?t=1562369052)
Build Author
pedrofernandez
Views
34218
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
253602
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
ROUTY CNC Router (V-Slot Belt & Pinion)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
![890KV OX RC spindle](https://openbuilds.com/data/article_images/l/0/411.jpg?t=1399994797)
Build Author
Robert Hummel
Views
68933
890KV OX RC spindle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is intended as a light alternative to the Dremel rotary tool.
![Maximus 3D Printer](https://openbuilds.com/data/article_images/l/0/952.jpg?t=1406983407)
Build Author
mytechno3d
Views
64043
Maximus 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30462
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
180661
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
![OpenBuilds MiniMill](https://openbuilds.com/data/article_images/l/5/5087.jpg?t=1543859341)
Build Author
Mark Carew
Views
141456
OpenBuilds MiniMill
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
![FARM OX (Four Axis Rotary Machine)](https://openbuilds.com/data/article_images/l/2/2415.jpg?t=1438353710)
Build Author
ymilord
Views
55099
FARM OX (Four Axis Rotary Machine)
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
Salmon Sphinx 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
![GridBot Two: Powerfully Simple](https://openbuilds.com/data/article_images/l/9/9144.jpg?t=1580061310)
Build Author
SOA
Views
58188
GridBot Two: Powerfully Simple
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.
Dragon Plasma cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you
![C-Beam Lead Screw CNC Mountain](https://openbuilds.com/data/article_images/l/3/3947.jpg?t=1478950296)
Build Author
Savvas
Views
18158
C-Beam Lead Screw CNC Mountain
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
![Workbee CNC Router/Laser/Plotter](https://openbuilds.com/data/article_images/l/7/7966.jpg?t=1552235073)
Build Author
Leonard Cross
Views
33824
Workbee CNC Router/Laser/Plotter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
![1000x1000 Two version of router Belt and Screw](https://openbuilds.com/data/article_images/l/6/6637.jpg?t=1519558083)
Build Author
Janis93
Views
13720
1000x1000 Two version of router Belt and Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Beefed-up and customized OX build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
LCD Based SLA Resin Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.
![C-Beam Prefab Untitled](https://openbuilds.com/data/article_images/l/3/3986.jpg?t=1474752615)
Build Author
ahayden
Views
25117
C-Beam Prefab Untitled
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
![Sphinx XL](https://openbuilds.com/data/article_images/l/4/4141.jpg?t=1507417836)
Build Author
beardyblair
Views
24140
Sphinx XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
![LS-LASER](https://openbuilds.com/data/article_images/l/7/7304.jpg?t=1532805578)
Build Author
LukasK
Views
21511
LS-LASER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
![M4: 1510SS Heavy Mk.I](https://openbuilds.com/data/article_images/l/9/9393.jpg?t=1598081959)
Build Author
Rob Taylor
Views
15999
M4: 1510SS Heavy Mk.I
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
Big Ox Heavy Duty
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Heavy Duty version of the standard Big Ox build.
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22168
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
![The Beeline CNC](https://openbuilds.com/data/article_images/l/6/6656.jpg?t=1519854542)
Build Author
blterry1
Views
16494
The Beeline CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here are the instructions to build the Beeline custom CNC router table.
![Stinger V Micro Mill](https://openbuilds.com/data/article_images/l/0/695.jpg?t=1398453371)
Build Author
Robert Hummel
Views
24373
Stinger V Micro Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
OpenBuilds ACRO Z Axis
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
Rotary CNC
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
I'm building a machine specifically for doing 4th axis work on woodwind instruments.
![OneZ i3](https://openbuilds.com/data/article_images/l/3/3389.jpg?t=1460922236)
Build Author
Keith Davis
Views
32711
OneZ i3
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.
![](https://openbuilds.com/data/article_images/l/3/3890.jpg?t=1480251471)
Build Author
Glenn Weston
Views
16723
"The Moagie Mill" My C-Beam XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23085
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Double D-Bot 400mm x 400mm x 600mm
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40427
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15104
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![OX Heavy Duty Build](https://openbuilds.com/data/article_images/l/4/4223.jpg?t=1491879759)
Build Author
Gary Caruso
Views
23390
OX Heavy Duty Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z
![UK40OB](https://openbuilds.com/data/article_images/l/3/3988.jpg?t=1475587757)
Build Author
Ariel Yahni
Views
50650
UK40OB
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Spartacus
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
Some Improvements on the Workbee 1000x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Improvements both real and suggested for the Workbee assembly
![LINEAR RAIL SPHINX 55 (Blue OX plates)](https://openbuilds.com/data/article_images/l/9/9317.jpg?t=1588456683)
Build Author
that-jim
Views
41803
LINEAR RAIL SPHINX 55 (Blue OX plates)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Machine based on Sphinx 55 built with linear rails.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16628
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
C-Beam XXLarge "Tank"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
WorkLead, no wait, LeadBee, naw... WoodWorker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Improvements on the Lead machine using some Workbee parts
![Router / plasma cutting table ( Rack and pinion )](https://openbuilds.com/data/article_images/l/8/8838.jpg?t=1572632620)
Build Author
mytechno3d
Views
24321
Router / plasma cutting table ( Rack and pinion )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy DIY plasma cutting table
![3D Printer](https://openbuilds.com/data/article_images/l/0/225.jpg?t=1389473508)
Build Author
Cuong Vu
Views
31943
3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It took me 18 long nights to build it
![Project Death Star - DistortedDesigns Laser Engraver](https://openbuilds.com/data/article_images/l/1/1728.jpg?t=1438013480)
Build Author
DistortedDesigns
Views
32555
Project Death Star - DistortedDesigns Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
2 watt Laser Engraver, Simple, Fairly Low Cost, and Portable
![Ooznest OX CNC Machine](https://openbuilds.com/data/article_images/l/2/2084.jpg?t=1468952479)
Build Author
Ryan Lock
Views
129675
Ooznest OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
![Core-XY Cube](https://openbuilds.com/data/article_images/l/3/3536.jpg?t=1465995594)
Build Author
alan richard
Views
45726
Core-XY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Openbuilds C-beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.
![WorkBee CNC Machine](https://openbuilds.com/data/article_images/l/5/5626.jpg?t=1505419208)
Build Author
Ryan Lock
Views
124640
WorkBee CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
![Vinyl Application Roller table](https://openbuilds.com/data/article_images/l/5/5746.jpg?t=1507643871)
Build Author
Mac6986
Views
15571
Vinyl Application Roller table
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Build progress of custom roller table for applying graphics
C-beam Machine - Modesty
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified C-beam Machine. Taller (30 cm) C-beam uprights in gantry, and longer 750 mm frame in Y direction. XL gantry plate on X (and Z?). Y will have additional 700 mm SBR16 rails as extra support and slightly raised bed to fit above stepper motor. Approx. machinable area of 370 x 370 mm.
![Naomi Wu's Automatic Bartender- BarBot!](https://openbuilds.com/data/article_images/l/6/6597.jpg?t=1519192094)
Build Author
Naomi Wu
Views
9061
Naomi Wu's Automatic Bartender- BarBot!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
![High Z Mod for Lead CNC](https://openbuilds.com/data/article_images/l/8/8869.jpg?t=1570825850)
Build Author
Mark Carew
Views
29185
High Z Mod for Lead CNC
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
![OpenXY](https://openbuilds.com/data/article_images/l/2/2911.jpg?t=1448854520)
Build Author
Keith Davis
Views
28900
OpenXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
![MakerSL MSL-5 Cantilevered 3D Printer](https://openbuilds.com/data/article_images/l/3/3179.jpg?t=1466722048)
Build Author
Sonny Lowe
Views
29709
MakerSL MSL-5 Cantilevered 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
C-Beam Machine - MyFirstCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
Moag's CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance
D-BOT With Mods
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
What a way to learn about 3D printing
![CNC Sand and Spraycalk drawmaschine](https://openbuilds.com/data/article_images/l/4/4792.jpg?t=1492879931)
Build Author
kallibaba
Views
31835
CNC Sand and Spraycalk drawmaschine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
C Beam Rotary
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1389472486)
I've used the good work of Openbuilds & expanded it to suit.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18175
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29593
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
![K40 12x24in rebuild (In Original Case)](https://openbuilds.com/data/article_images/l/8/8287.jpg?t=1550170302)
Build Author
tshilling
Views
32322
K40 12x24in rebuild (In Original Case)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.
Florida Ox 2x4 Area 51 CNC Parts Original Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
2x4 Ox with Vac table
OX Tale
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Vertek CNC - 1000mm x 750mm Linear Rail on C Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
C beam gantry with steel guide rails!
Shawn's Workbee 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
Large 'Double H-Bot' using Openbuilds 2040 v-slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
![Original PhlatPrinter](https://openbuilds.com/data/article_images/l/0/95.jpg?t=1389473544)
Build Author
Mark Carew
Views
71140
Original PhlatPrinter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
CO2 laser.
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
TITANXY (Fixed Build Plate, Quad Z Screw, CoreXY)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super Rigid CoreXY 3D Printer
![UltiBots CB3030 CNC Router](https://openbuilds.com/data/article_images/l/3/3597.jpg?t=1467332619)
Build Author
UltiBots
Views
34652
UltiBots CB3030 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
SimplrBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple, yet rugged design, weighing only 6 lbs and with 13x13x14" volume with a 8x8x6" build area. While assembly is pretty simple, the small size and rigidity of the design make shipping assembled printers attractive.
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
19942
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
![CoreXY - e3d inspired](https://openbuilds.com/data/article_images/l/7/7021.jpg?t=1525161852)
Build Author
j0achim
Views
11084
CoreXY - e3d inspired
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
LEAD 1515, HGH15, SFU1604 Ball Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Project Completed.
![Plasma cutting table](https://openbuilds.com/data/article_images/l/3/3528.jpg?t=1465474923)
Build Author
mytechno3d
Views
33838
Plasma cutting table
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
![Sphinx Evolution](https://openbuilds.com/data/article_images/l/6/6390.jpg?t=1520123783)
Build Author
Michael.M
Views
8414
Sphinx Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)