Build List
-
Active Filters:
5
Lead 1515 tilting table and vertical table accessory
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.
OpenBuilds LEAD CNC Machine 1515 (60" x 60")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.
![DIY CNC SPINDLE](https://openbuilds.com/data/article_images/l/10/10479.jpg?t=1693129872)
Build Author
Suhmanda
Views
2327
DIY CNC SPINDLE
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC SPINDLE FOR DIY ROUTERS AND MILLING MACHINES ITSRS-985 MOTOR HAS MUCH BEFINITS THAN ANY OTHER DC MOTOR IN MARKET
Sphinx 66
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A Sphinx Linear rail build (600mm x 600mm) hence the title Sphinx66. Plates supplied by Chris Laidlaw. Linear rails used MGN15
KillerBee 1515 customized
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Killerbee 1515 with modifications.
![LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD](https://openbuilds.com/data/article_images/l/10/10378.jpg?t=1668756765)
Build Author
Ted Moyer
Views
3805
LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD
![OpenBuilds Lead 1515](https://openbuilds.com/data/article_images/l/10/10293.jpg?t=1650393599)
Build Author
Shaun Weitzel
Views
4836
OpenBuilds Lead 1515
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of a Lead 1515!
OB Lead 1515 CNC Router 2021
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
77123
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Lead 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js
![Rigid Compact Desktop C-BEAM](https://openbuilds.com/data/article_images/l/9/9887.jpg?t=1617382213)
Build Author
nickchnv
Views
10204
Rigid Compact Desktop C-BEAM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8589
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
![Sphinx 55](https://openbuilds.com/data/article_images/l/9/9795.jpg?t=1612990846)
Build Author
Kyo
Views
22678
Sphinx 55
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
![Hotwire cnc Surfboards](https://openbuilds.com/data/article_images/l/9/9769.jpg?t=1667476118)
Build Author
2SIsurf
Views
4683
Hotwire cnc Surfboards
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
LEAD 1515, HGH15, SFU1604 Ball Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Project Completed.
![OpenBuilds Table Series](https://openbuilds.com/data/article_images/l/9/9585.jpg?t=1606518488)
Build Author
OpenBuilds
Views
19336
OpenBuilds Table Series
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds Table Series offers a modular table structure that grows with your needs.
![Racoon CNC](https://openbuilds.com/data/article_images/l/9/9623.jpg?t=1605312916)
Build Author
Stokrotka74
Views
5735
Racoon CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
![C-Beam® Tension XL Linear Actuator](https://openbuilds.com/data/article_images/l/9/9468.jpg?t=1597952599)
Build Author
OpenBuilds
Views
12811
C-Beam® Tension XL Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Bringing your lead screw precision and accuracy to new lengths using a simplistic tension system!
![Modified Sphinx 55 with MGN12 linear rails](https://openbuilds.com/data/article_images/l/9/9456.jpg?t=1596345440)
Build Author
Wes Dwight
Views
6084
Modified Sphinx 55 with MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
![Sphinx Derived Router](https://openbuilds.com/data/article_images/l/9/9234.jpg?t=1583687307)
Build Author
Corey Corbin
Views
3850
Sphinx Derived Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.
1515 Deluxe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.
![workbee 1510](https://openbuilds.com/data/article_images/l/9/9201.jpg?t=1583436500)
Build Author
jeff johnson
Views
4763
workbee 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Getting more height out of the !510
1250x1000 Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
![MakerSL MSL-65 Manual Coffee Grinder Stand](https://openbuilds.com/data/article_images/l/9/9048.jpg?t=1576156656)
Build Author
Sonny Lowe
Views
5349
MakerSL MSL-65 Manual Coffee Grinder Stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
![Barcelona Build](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Neil Scott
Views
2033
Barcelona Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
![OpenBuilds Sphinx 55 (20](https://openbuilds.com/data/article_images/l/7/7197.jpg?t=1529019228)
Build Author
Mark Carew
Views
47689
OpenBuilds Sphinx 55 (20" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
29197
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
![BD's Burn Box - ACRO Laser Engraver System](https://openbuilds.com/data/article_images/l/9/9010.jpg?t=1574574338)
Build Author
Bruce Walker
Views
5868
BD's Burn Box - ACRO Laser Engraver System
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
![Lead CNC 1510 modified](https://openbuilds.com/data/article_images/l/8/8843.jpg?t=1572455082)
Build Author
Marco964
Views
7849
Lead CNC 1510 modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
![C-Beam Mods](https://openbuilds.com/data/article_images/l/8/8929.jpg?t=1571893487)
Build Author
tmadrms
Views
6108
C-Beam Mods
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam machine mods.
![OpenBuilds Workbee 1050 (40](https://openbuilds.com/data/article_images/l/7/7199.jpg?t=1529026299)
Build Author
Mark Carew
Views
24531
OpenBuilds Workbee 1050 (40" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
![Openbuilds Table Top 50w Co2 Laser Cutter/Engraver](https://openbuilds.com/data/article_images/l/8/8688.jpg?t=1562369052)
Build Author
pedrofernandez
Views
34332
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
14784
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
Sphinx 55 on MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
![CNC Auto-pipette](https://openbuilds.com/data/article_images/l/8/8784.jpg?t=1567236148)
Build Author
Sir Bagels
Views
2111
CNC Auto-pipette
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
75x75
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Simple cnc with 5mm steel plates.
My Workbee build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Workbee, 1000mmX750mm , from China
![Prusa i3 Bear Upgrade V2](https://openbuilds.com/data/article_images/l/6/6428.jpg?t=1519671067)
Build Author
pek
Views
77581
Prusa i3 Bear Upgrade V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
![MEGADELTA, TLM CLONE with 500MM bed](https://openbuilds.com/data/article_images/l/8/8257.jpg?t=1549700418)
Build Author
patnap71
Views
5669
MEGADELTA, TLM CLONE with 500MM bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
All metal frame 500mm bed Delta 3D printer
Big a** printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
In-progress 500x500x1800
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22186
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
![CNC ESS Controls System](https://openbuilds.com/data/article_images/l/8/8144.jpg?t=1548191018)
Build Author
Jacob Lotter
Views
4188
CNC ESS Controls System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Shawn's Workbee 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
![FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router](https://openbuilds.com/data/article_images/l/8/8127.jpg?t=1547436481)
Build Author
Jay Almers
Views
6416
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Portable Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
31577
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
Rigidbot Big with glass bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
Phil's Workbee
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Wanted a nice project to work and learn on... now have a big CNC to play with A 1500x1000mm Workbee
![Hyatt and My Journey to Tonehenge](https://openbuilds.com/data/article_images/l/7/7945.jpg?t=1543606004)
Build Author
Craig Hollabaugh
Views
3678
Hyatt and My Journey to Tonehenge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Brice's CNC Router Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.
![C-Beam Sphinx](https://openbuilds.com/data/article_images/l/7/7952.jpg?t=1543675427)
Build Author
Vin1027
Views
6137
C-Beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
ECNCML (budget mashup)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build summarizes my CNC milling and laser engraving machine conversion from a dimensional lumber frame and electrical mess to an all aluminum frame with a safe and well constructed (IMHO) control system with the resources I had available.
![Rock n Roll](https://openbuilds.com/data/article_images/l/7/7857.jpg?t=1543263666)
Build Author
rob4cnc
Views
3142
Rock n Roll
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.
WorkBee 1510 - First CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
![KYO SPHINX a la' SCYBUCK](https://openbuilds.com/data/article_images/l/7/7717.jpg?t=1539666910)
Build Author
SCYBUCK
Views
4350
KYO SPHINX a la' SCYBUCK
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
KYO SPHINX, CENTROID ACORN, GECKO 540, HALL EFFECT LIMIT SWITCHES, 2.2 KW, 24,000 RPM SPINDLE, WATER COOLED, 600 oz-in STEPPERS, INTENDED TO CUT ALUMINUM.
![Grizzly G0758 Benchtop Mill Conversion](https://openbuilds.com/data/article_images/l/7/7754.jpg?t=1540491599)
Build Author
Rob Taylor
Views
8987
Grizzly G0758 Benchtop Mill Conversion
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A proper CNC mill conversion. But quite small, with my trademark idiosyncracies.
![Acro System cable management and enclosure](https://openbuilds.com/data/article_images/l/7/7634.jpg?t=1537458611)
Build Author
Hilleke
Views
6523
Acro System cable management and enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138811
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![OP C-Beam Machine XL by ChrisViral](https://openbuilds.com/data/article_images/l/7/7190.jpg?t=1528829194)
Build Author
ChrisViral
Views
5836
OP C-Beam Machine XL by ChrisViral
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8217
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4940
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
C_Beam X5L Hybrid_Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
classic router with a ab table
![Was once a mini mill](https://openbuilds.com/data/article_images/l/7/7328.jpg?t=1531492528)
Build Author
dreys
Views
10235
Was once a mini mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Working progress.
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23099
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
1075 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.
Plasma CNC, 4'6" × 8'8" v0318
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.
![3-Axis Plywood CNC](https://openbuilds.com/data/article_images/l/6/6478.jpg?t=1518460571)
Build Author
TurfnSurf
Views
5123
3-Axis Plywood CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
![ACRO 20x20](https://openbuilds.com/data/article_images/l/6/6923.jpg?t=1521926278)
Build Author
pedrofernandez
Views
6665
ACRO 20x20
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Acro Laser Machine Build
5 X 5 Plasma SIMPLE Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
5 X 5 Plasma table...Hypertherm 45 XP....CandCNC....Openbuilds
![C-Beam Upgrade to Larger C-Beam](https://openbuilds.com/data/article_images/l/6/6732.jpg?t=1519848776)
Build Author
crnrstndes
Views
3166
C-Beam Upgrade to Larger C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11633
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
![Mini-Mill Enhanced](https://openbuilds.com/data/article_images/l/6/6467.jpg?t=1518387588)
Build Author
Rob Withoff
Views
3828
Mini-Mill Enhanced
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some enhancements of the basic mini-mill
![WorkBee CNC full kit 1500mm x 1500mm](https://openbuilds.com/data/article_images/l/6/6343.jpg?t=1517345530)
Build Author
Camvec
Views
5401
WorkBee CNC full kit 1500mm x 1500mm
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!
![The Floating Dust Shoe](https://openbuilds.com/data/article_images/l/6/6237.jpg?t=1516176994)
Build Author
Eric Jacobsson
Views
13132
The Floating Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
![Prusa i3 Bear Half Upgrade v1.0](https://openbuilds.com/data/article_images/l/5/5661.jpg?t=1510508277)
Build Author
pek
Views
24512
Prusa i3 Bear Half Upgrade v1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12938
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
![Stainless OX Kit Build](https://openbuilds.com/data/article_images/l/5/5790.jpg?t=1511062628)
Build Author
Tucstrlly
Views
7782
Stainless OX Kit Build "Diamondback CNC"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
![Arizona OpenBuilds MiniMill CNC](https://openbuilds.com/data/article_images/l/6/6092.jpg?t=1514846826)
Build Author
ZacharyB
Views
4566
Arizona OpenBuilds MiniMill CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
Hot Wire 4 Axis CNC Foam cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Printer number 2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A Large Printer that will hopefully be able to print at least 45cm cubed
Heavy duty C Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11031
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
![1500x1000mm Adjustable Height](https://openbuilds.com/data/article_images/l/5/5289.jpg?t=1499574114)
Build Author
JerryD
Views
4536
1500x1000mm Adjustable Height
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
![3D Printer on Prusa architecture with best parts available](https://openbuilds.com/data/article_images/l/5/5081.jpg?t=1495781202)
Build Author
evgeny156
Views
6403
3D Printer on Prusa architecture with best parts available
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Wanna quet an nice looking device done by my hands
![M3D Squared](https://openbuilds.com/data/article_images/l/4/4583.jpg?t=1487205483)
Build Author
Limine3D
Views
7581
M3D Squared
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
![1x1 Meter Laser Engraver](https://openbuilds.com/data/article_images/l/4/4584.jpg?t=1487243327)
Build Author
COMsulting
Views
8773
1x1 Meter Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Building of a big open frame laser engraver.
3D PrintBot 500x500x500
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large scale True 500x500x500 build volume 3D printer.
![Need a catchy name - enlarging CNC](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
McAdam
Views
3054
Need a catchy name - enlarging CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts
![1500mmx500mm Kossel Delta](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
TouchPadKing
Views
4263
1500mmx500mm Kossel Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...
![Budget 1500mm OpenBuilds V-Slot Deltabot Build](https://openbuilds.com/data/article_images/l/4/4396.jpg?t=1485280967)
Build Author
dodgenet
Views
5541
Budget 1500mm OpenBuilds V-Slot Deltabot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20212
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
SUPER OX NEMA 34 1600 OZ Motors!!!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC OX 1500X3000
![LinearRail - 3D Printer](https://openbuilds.com/data/article_images/l/4/4307.jpg?t=1484074037)
Build Author
sgspenceley
Views
6559
LinearRail - 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.
![RiNo Route](https://openbuilds.com/data/article_images/l/2/2577.jpg?t=1442333948)
Build Author
Steven Sampson
Views
9911
RiNo Route
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
![SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer](https://openbuilds.com/data/article_images/l/4/4275.jpg?t=1483369813)
Build Author
Venturebit
Views
10551
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30472
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
![10 x 5 ft plazma table build](https://openbuilds.com/data/article_images/l/3/3944.jpg?t=1473520223)
Build Author
Dave420
Views
13149
10 x 5 ft plazma table build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Attaching V Slot or mutable V Slot end on end to a larger steel frame table.
Custom Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Custom black and red Big Ox
![Kyoujin Mk1 (C-Beam /w Rack & Pinion)](https://openbuilds.com/data/article_images/l/3/3608.jpg?t=1466993307)
Build Author
ymilord
Views
11320
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)