Select a Category
Build Author Rob Mahan Views 4450
Rob's C-Beam Machine XLarge
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
Build Author coxnugget Views 962
Bedroom Builds (BrB) DIY CNC
So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.
Build Author JWhitten Views 8101
Build #2 - Bigger & Stronger
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
Build Author Tucstrlly Views 4638
Stainless OX Kit Build "Diamondback CNC"
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
Build Author rcKeith Views 27519
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author mcbuilder22 Views 8056
C-Beam "2" XLarge CNC Router
C-Beam 2XL CNC Router
Build Author Tomas F Uribe Views 3089
2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking
Build Author Gabriel Faber Views 8000
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
Build Author Gary Bonard Views 3633
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Build Author Dominic Ross Views 6838
Beaver's OX 1500
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
Build Author MikieLikesIt Views 4855
Cousin CNC OX Router
I hope to be able to cut out larger gantry plates with some modifications. I would like to do some 3D cuts in the near future. I've also read about doing some lithophane projects for Christmas.
Build Author Steve hope Views 12748
8x4 CNC build
Routy cnc upgrade.
Build Author Michael Burns Views 5805
My Little OX
This build has been an educational experience. Software and hardware alike.
Build Author KBill Views 10967
1500x1000 (4x2) Router - OX derivative
OX build with 1.5m gantry the 1m deep table.