In this session the parts were ordered from amazon and open Builds. Using closed loops steppers alongside openbuild extruded aluminum and their great cbeam actuator kits. This build is still in progress due to lead time on parts I have the general framing installed and one actuator with a nema23 closed loop stepper powering the 8mm acme rod the build is self explaintory due to the ease of openbuild products ease of installation. I will break down the building process after I receive the final hardware but for now this is a treat.
Bedroom Builds (BrB) DIY CNC
So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.
- Build License:
- CC - Attribution - CC BY
Reason for this BuildDec 18, 2017 - Present
Qty Part Name Part Link Comments 1 Nema 23 closed loop kit https://www.amazon.com/gp/aw/d/B07235MBM6/ref=ya_aw_oh_bi... Link 1 Mach3 USB motion controller https://www.amazon.com/gp/aw/d/B01LY5BH9B/ref=ya_aw_oh_bi... Link 1 Meanwell 24v D.C. Power supply https://www.amazon.com/gp/aw/d/B005T6OX62/ref=ya_aw_oh_bi... Link