Select a Category
Build Author that-jim Views 27336
LINEAR RAIL SPHINX 55 (Blue OX plates)
Machine based on Sphinx 55 built with linear rails.
Build Author Corey Corbin Views 3335
Ball Screw Carrier.
Create a ball screw carrier with out BF BK bearing blocks.
Build Author Jacob Lotter Views 19961
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author SecretSpy711 Views 17853
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author James Evanko Views 2449
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author Jones Views 2310
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author Beam Views 8215
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author TimVukman Views 3033
My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet
Build Author Tim Pierce Views 11364
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs