Select a Category
Build Author SOA Views 17088
GridBot Two: Powerfully Simple
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 4 hours.
Build Author SecretSpy711 Views 13107
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author Matthew Bates Views 2390
CNC Router Overhaul
This will be a complete overhaul of this router with some cool modifications.
Build Author Ed Chung Views 4084
Rigidbot Big with glass bed
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
Build Author pek Views 18177
Prusa i3 Bear Half Upgrade v1.0
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
Build Author James Archer Views 8689
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author JP Warnke Views 9196
Warnke CNC Router
A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.
Build Author Simon Rafferty Views 5113
A Rigid Delta Printer using C-Beam screw actuators
Build Author Sam Dobbie Views 5257
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author MechEng Views 12787
Generic Rigid 3D Printer (Currently on 1st Revision!)
Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.