Build List
-
Active Filters:
heated
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
110648
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Travel Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build using standard parts as much as possible, Open Builds etc. To keep printer usable for more materials will be trying a heated bed with rotary elec union for the thermistor and power.
![Kossel Extreme](https://openbuilds.com/data/article_images/l/9/9740.jpg?t=1611166774)
Build Author
Frank Gore
Views
7455
Kossel Extreme
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.
![GridBot Two: Powerfully Simple](https://openbuilds.com/data/article_images/l/9/9144.jpg?t=1580061310)
Build Author
SOA
Views
58613
GridBot Two: Powerfully Simple
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.
![OpenBuilds PowerCase](https://openbuilds.com/data/article_images/l/7/7836.jpg?t=1542228986)
Build Author
Mark Carew
Views
6759
OpenBuilds PowerCase
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
![Panther 3D printer](https://openbuilds.com/data/article_images/l/4/4577.jpg?t=1568965395)
Build Author
taratata2016
Views
7004
Panther 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
5016
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
![M3D Squared](https://openbuilds.com/data/article_images/l/4/4583.jpg?t=1487205483)
Build Author
Limine3D
Views
7641
M3D Squared
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
STEAM Machine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Simple design with a large build volume - 450x450x450
![M3Delta](https://openbuilds.com/data/article_images/l/1/1022.jpg?t=1409236449)
Build Author
Limine3D
Views
20826
M3Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer designed in sketchup and includes an adjustable bed.
![Printer1](https://openbuilds.com/data/article_images/l/3/3452.jpg?t=1463474495)
Build Author
andrizzle
Views
5969
Printer1
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
![Folger-Tech Y-Carriage](https://openbuilds.com/data/article_images/l/2/2848.jpg?t=1448208474)
Build Author
Sonny Lowe
Views
9858
Folger-Tech Y-Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
![3D Printer](https://openbuilds.com/data/article_images/l/0/225.jpg?t=1389473508)
Build Author
Cuong Vu
Views
32170
3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It took me 18 long nights to build it
![V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES](https://openbuilds.com/data/article_images/l/1/1949.jpg?t=1433097153)
Build Author
Darren Ditto
Views
9594
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)