Select a Category
Build Author Makerparts Views 372
Makerparts Mpro Slider System
Makerparts.ca MPro Camera Slider System
Build Author Beam Views 3579
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author Tommy Williamson Views 975
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Build Author RJ_Make Views 712
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
Build Author DaveStewart Views 2553
Small C-Beam Plate Maker With Remote Login & Operation
C-Beam Plate cutter with Raspberry Pi V3, Arduino Mega2560 and Camera. Remote login & operation via SSH with cnc.js server, mjpg server on the Pi.
Build Author Anthony Castelluci Views 699
Simple Camera Lofted Camera Slider
Build a manual camera slider.
Build Author gjwest Views 24767
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author 3D Meister Views 1918
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Rob Taylor Views 17633
DSLR Video Slider
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
Build Author cbordeleau Views 6471
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author cbordeleau Views 2939
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author alex_b Views 9101
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author snokid Views 5552
C-beam Camera slider
feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.
Build Author tonkajeep34 Views 12955
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.