hope you can see the photos if not I can send you photos
Build in 'CNC ROUTER BUILDS' published by jeff johnson, Mar 5, 2020.
Getting more height out of the !510
- Build License:
- GNU (GPL3+) General Public Licence
Reason for this Buildto gain height, I was having issues with a 3/4" spoiler board and could barley fit a 3/4" board to cut
Qty Part Name Part Link Comments 4 linear rail https://openbuildspartstore.com/v-slot-20x40-linear-rail/ Link 1500MM rails - I cut off 1.5 inch to fit 4 Black Angle Corner connector https://openbuildspartstore.com/black-angle-corner-connec... Link these will be added to the top rails front/rear rails when moved to the outside of the bracket 4 End Cap https://openbuildspartstore.com/end-cap/ Link These were added under the newley addd corner connectors 10 L Bracket https://openbuildspartstore.com/l-bracket/ Link singles added for wate board since 1 new rail was added, 4 doubles were added to mount the 4 new rails, the triples i had were cut to doubles