Select a Category
Build Author Michael.M Views 43103
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Build Author Mark Carew Views 115723
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author Mark Carew Views 228571
C-Beam® Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Ryan Lock Views 100935
WorkBee CNC Machine
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
Build Author Kyo Views 126826
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author Apothus Views 18977
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author Troy Proffitt Views 18239
Sphinx Upgraded plates / ballscrews and linear rail
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
Build Author beardyblair Views 22878
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author HuguesP Views 7305
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
Build Author Paul Stoller Views 3245
Rise of the Sphoenix
I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.
Build Author Anthony Bolgar Views 1151
CBeam Sphinx Upgrade
Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.
Build Author gwandad Views 20047
C Beam Rotary
I've used the good work of Openbuilds & expanded it to suit.
Build Author MarkM_NJ Views 16880
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Build Author signzonepr Views 9902
HD c Beam CNC Router
24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!
Build Author Terone Burgenheim Views 1518
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
Build Author Brian Popp Views 38103
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Build Author Adam Filipowicz Views 6282
CNC Based on CBeam, with No custom Plates, and Z GANTRY
Build Author Garrettcompston Views 3685
My 2nd cnc build
My new build to upgrade from my worn out shapeoko
Build Author Kyo Views 6683
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
Build Author DA_Spec Views 5460
Heavy duty C Beam
a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle
Build Author Sonny Lowe Views 5196
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Build Author MuchoBurrito Views 3983
Reusing parts to build a CNC - planning stage
Build Author peter28 Views 3732
i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture
Build Author James Hayes Views 4046
Pure Cbeam 900x1000
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Build Author Barry Danks Views 4891
TAZ C-Beam CnC Router by RC-CnC
C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel
Build Author hasemar Views 4039
C-Beam CNC (1st cnc build!)
1st build CBeam Machine w/ raspberry pi-protoneer hat controller
Build Author elvisbot Views 2490
Plate 'o CBEAM
I'm starting with the c-beam bundle, and I hope to end up with a pretty useful little platemaker/shallow relief carver. I'm hoping to discover how accurate and efficient it can be.