Build List
-
Active Filters:
80
Custom build 80w Co2 Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
![Cartesian Style Build UK](https://openbuilds.com/data/article_images/l/10/10100.jpg?t=1636385413)
Build Author
Steve Hall
Views
3193
Cartesian Style Build UK
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another Cartesian style build with parts from the UK, US & China.
Bored in the garage enclosure build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15181
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
1250x1000 Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
20110
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
15121
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7645
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23191
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Openbuilds Co2 80w Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
![C-Beam Kyo Sphinx 10060](https://openbuilds.com/data/article_images/l/6/6635.jpg?t=1519552988)
Build Author
Sprags
Views
1924
C-Beam Kyo Sphinx 10060
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
More stuff here.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12984
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
My 80w Laser build (1000x1000 cutting area)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is a 80w laser which I am building (picture of the case) the frame is constructed with normal square tubing with plastic corners. this laser needs to live outside
![Stainless OX Kit Build](https://openbuilds.com/data/article_images/l/5/5790.jpg?t=1511062628)
Build Author
Tucstrlly
Views
7839
Stainless OX Kit Build "Diamondback CNC"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
80watt Lasercutter, workingarea 105x52[cm], steel frame
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.
OXilla - a 3ft x 3ft CNC Router/Mill - Goals are strength, power and speed
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This will be an ongoing log as I build this machine. Name change by popular demand - at least a couple of us. :)
![1500x1000mm Adjustable Height](https://openbuilds.com/data/article_images/l/5/5289.jpg?t=1499574114)
Build Author
JerryD
Views
4569
1500x1000mm Adjustable Height
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
![Dave's Z axis and powder coated.](https://openbuilds.com/data/article_images/l/3/3387.jpg?t=1460854361)
Build Author
Dave420
Views
5392
Dave's Z axis and powder coated.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.
![Folger-Tech Y-Carriage](https://openbuilds.com/data/article_images/l/2/2848.jpg?t=1448208474)
Build Author
Sonny Lowe
Views
9858
Folger-Tech Y-Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
McRouter 3 Axis CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.
![V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES](https://openbuilds.com/data/article_images/l/1/1949.jpg?t=1433097153)
Build Author
Darren Ditto
Views
9594
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)