Welcome to Our Community

Some features disabled for guests. Register Today.

CoreXY 3D build one

Discussion in '3D printers' started by recoush, Apr 9, 2017.

  1. recoush

    recoush Well-Known
    Builder

    Joined:
    Feb 3, 2017
    Messages:
    2
    Likes Received:
    1
    recoush published a new build:

    Read more about this build...
     
  2. Shortyski13

    Shortyski13 Well-Known
    Builder

    Joined:
    Mar 28, 2017
    Messages:
    25
    Likes Received:
    6
    looks like you have something started. any more pictures?
     
  3. recoush

    recoush Well-Known
    Builder

    Joined:
    Feb 3, 2017
    Messages:
    2
    Likes Received:
    1
    Yes will try and update does not let me post more then 1 photo, Figured out the Movement issue all 3-Z axis motor platforms are working together., working out the alignment of the pulleys on x+Y had to get some different screws. Nothing locally available in metric. plus the mid size frame is hard to capture using one photo that shows everything. wish i could post sectional photos of the assembly.
     

Share This Page