Build List
-
Active Filters:
smooth
![V-Slot™ Nema 23 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/7/7821.jpg?t=1542037187)
Build Author
Mark Carew
Views
19983
V-Slot™ Nema 23 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
![The Plastic Beast CoreXY Printer](https://openbuilds.com/data/article_images/l/6/6698.jpg?t=1519785516)
Build Author
cdsmith12
Views
25508
The Plastic Beast CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.
![THE delta](https://openbuilds.com/data/article_images/l/7/7854.jpg?t=1542448684)
Build Author
deltajegga
Views
8520
THE delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
probably as big as you'd want it...
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
110648
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
GIGAWATT 2.1 LASER CUTTER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40
![K40 Laser Build (Major Changes)](https://openbuilds.com/data/article_images/l/5/5867.jpg?t=1510191534)
Build Author
Superslinky
Views
8712
K40 Laser Build (Major Changes)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Major K40 Laser Mod
![C-Beam Sphinx](https://openbuilds.com/data/article_images/l/7/7952.jpg?t=1543675427)
Build Author
Vin1027
Views
6184
C-Beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
![Rack and Pinion Cartesian Mill](https://openbuilds.com/data/article_images/l/9/9020.jpg?t=1576955758)
Build Author
Joe F
Views
7049
Rack and Pinion Cartesian Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11129
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
![D&R Tiger Paw build combo](https://openbuilds.com/data/article_images/l/6/6856.jpg?t=1550455582)
Build Author
Lasersc
Views
9498
D&R Tiger Paw build combo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
![The D & R TigerPaw Trilogy](https://openbuilds.com/data/article_images/l/8/8729.jpg?t=1564161580)
Build Author
Lasersc
Views
3910
The D & R TigerPaw Trilogy
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
SMD Pick and place machine - Smoothieboard/OpenPnp
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Rigidbot Big with glass bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
![CNC ESS Controls System](https://openbuilds.com/data/article_images/l/8/8144.jpg?t=1548191018)
Build Author
Jacob Lotter
Views
4269
CNC ESS Controls System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
![DIY Flywheel Camera Slider](https://openbuilds.com/data/article_images/l/5/5181.jpg?t=1496883214)
Build Author
Beam
Views
9564
DIY Flywheel Camera Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My take on a non affordable slider.
![Gooshpoo's H style cnc machine](https://openbuilds.com/data/article_images/l/6/6195.jpg?t=1521645997)
Build Author
Gooshpoo
Views
8065
Gooshpoo's H style cnc machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool project about my cnc machines unique style.
![DM C-Beam XXL Tank](https://openbuilds.com/data/article_images/l/5/5817.jpg?t=1509330303)
Build Author
dmasters
Views
7404
DM C-Beam XXL Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
OX CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
![CubeSpawn Ultimaker 3D Printer Module](https://openbuilds.com/data/article_images/l/0/782.jpg?t=1401285394)
Build Author
CubeSpawn
Views
18502
CubeSpawn Ultimaker 3D Printer Module
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker
![My little monster](https://openbuilds.com/data/article_images/l/4/4942.jpg?t=1492733760)
Build Author
J-Wahl Dezign
Views
10189
My little monster
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modified Tevo
![First 3d build](https://openbuilds.com/data/article_images/l/1/1269.jpg?t=1418732417)
Build Author
jjcolletta
Views
10338
First 3d build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.
Voxel OX Based Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Building upon the great work done by Marshall Peck and others. I have started a new build.
![1.4 meter tall build height, 300x410mm build plate cartesian](https://openbuilds.com/data/article_images/l/4/4797.jpg?t=1490545360)
Build Author
J-Wahl Dezign
Views
8300
1.4 meter tall build height, 300x410mm build plate cartesian
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
![SmoothiebrainZ CBeam Machine](https://openbuilds.com/data/article_images/l/4/4120.jpg?t=1479069744)
Build Author
Maxime Favre
Views
8577
SmoothiebrainZ CBeam Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
![Neptunes Ox](https://openbuilds.com/data/article_images/l/2/2991.jpg?t=1467556198)
Build Author
Neptunes Guitars
Views
7526
Neptunes Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
![DutziDelta RepStrap](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
Fabio Bertuzz
Views
3585
DutziDelta RepStrap
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.
![CubeSpawn 3 Axis Mill Module](https://openbuilds.com/data/article_images/l/0/758.jpg?t=1401214747)
Build Author
CubeSpawn
Views
14856
CubeSpawn 3 Axis Mill Module
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)