Welcome to Our Community

Some features disabled for guests. Register Today.

MEGADELTA, TLM CLONE with 500MM bed

Discussion in '3D printers' started by patnap71, Feb 9, 2019.

  1. patnap71

    patnap71 New
    Builder

    Joined:
    Apr 18, 2018
    Messages:
    7
    Likes Received:
    0
  2. patnap71

    patnap71 New
    Builder

    Joined:
    Apr 18, 2018
    Messages:
    7
    Likes Received:
    0
    My one concern is that if I choose the glass bed then I will have to order it first and measure it before getting the bed holder plate cut for clearance.
    Also it seems like most of the 20" glass beds on Amazon are about 1/2" = 12.7mm, 3/8" = 9.525mm, few 1/4" = 6.35mm thick so it will stick up above the platform a bit, hmmm.
    Thank gosh there are a few 6mm ones so only 2mm will be above the build platform, not so bad.
     
    #2 patnap71, Feb 9, 2019
    Last edited: Feb 9, 2019

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice