Build List
-
Active Filters:
1
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30556
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23192
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
C-Beam XXLarge "Tank"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
CubeFoot CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
![RONIN OX | The G10/Carbon Fiber Hogger](https://openbuilds.com/data/article_images/l/2/2876.jpg?t=1447906012)
Build Author
alex_b
Views
14274
RONIN OX | The G10/Carbon Fiber Hogger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
![The Floating Dust Shoe](https://openbuilds.com/data/article_images/l/6/6237.jpg?t=1516176994)
Build Author
Eric Jacobsson
Views
13277
The Floating Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16776
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11742
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
Sphinx 55 on MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
![Vulcan MAX](https://openbuilds.com/data/article_images/l/9/9397.jpg?t=1593797244)
Build Author
Keith Davis
Views
20979
Vulcan MAX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
While mimicing the frame platform of the popular Crealiy CR-10 and Ender series, the Vulcan MAX overcomes design weaknesses in both printers. Chief improvements are a more stable, rigid mounting of the Z frame and Z gantry.
V-slot and MDF DeltaBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.
![Openbuilds rovo laser mini(오픈빌드)](https://openbuilds.com/data/article_images/l/2/2095.jpg?t=1430628083)
Build Author
inhan
Views
19900
Openbuilds rovo laser mini(오픈빌드)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
![C-Beam Rigid - 'The Hog'](https://openbuilds.com/data/article_images/l/3/3039.jpg?t=1493136162)
Build Author
ymilord
Views
21499
C-Beam Rigid - 'The Hog'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23800
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
183032
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22360
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20349
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18297
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![Gantry Type CNC with Makita Router](https://openbuilds.com/data/article_images/l/5/5051.jpg?t=1494965871)
Build Author
Rick Holder
Views
13981
Gantry Type CNC with Makita Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12985
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
![DM C-Beam XXL Tank](https://openbuilds.com/data/article_images/l/5/5817.jpg?t=1509330303)
Build Author
dmasters
Views
7405
DM C-Beam XXL Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
![Lab Power Supply + Soldering Station](https://openbuilds.com/data/article_images/l/6/6861.jpg?t=1521067862)
Build Author
uGen
Views
17069
Lab Power Supply + Soldering Station
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
Workbee with Duet controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Workbee 1010 with Duet controller from Ooznest
![40x40 V-Slot Rod Type Linear Actuator](https://openbuilds.com/data/article_images/l/9/9196.jpg?t=1581687266)
Build Author
Martin.Barfoed
Views
5248
40x40 V-Slot Rod Type Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Rod-type Linear Actuator based on the 40x40 V-slot profile
OpenBuilds LEAD CNC Machine 1515 (60" x 60")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.
![Portable self-contained Lead 1010 table](https://openbuilds.com/data/article_images/l/10/10331.jpg?t=1658164662)
Build Author
Frank Del Favero
Views
5786
Portable self-contained Lead 1010 table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have a two car garage NOT devoted to 3d printing or CNC. I have set aside a space for my 3d printer and a place to store my portable CNC table. The reason it’s portable is so that I wheel and can use my Lead 1010 outside where it won’t make a mess in the garage. The table is self contained. It houses a vac system as well as my CNC tools and supplies.
![MDF Delta](https://openbuilds.com/data/article_images/l/0/692.jpg?t=1398125258)
Build Author
nicklogan
Views
15378
MDF Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
![Babe - The Big Blue (Laser) OX Build](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
DiggerJ
Views
7762
Babe - The Big Blue (Laser) OX Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.
![1000mm X 1500mm OX CNC -- Fiber/Garolite](https://openbuilds.com/data/article_images/l/1/1289.jpg?t=1414951188)
Build Author
SlyClockWerkz
Views
15816
1000mm X 1500mm OX CNC -- Fiber/Garolite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the full size OX.
Beaver's OX 1500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
CNC Glass Grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
![Printer1](https://openbuilds.com/data/article_images/l/3/3452.jpg?t=1463474495)
Build Author
andrizzle
Views
5969
Printer1
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
![OpenBuilds C-beam 15mm belt on 1500mm C-Beam.](https://openbuilds.com/data/article_images/l/3/3457.jpg?t=1463622960)
Build Author
Dave420
Views
13205
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
C-Beam 1M
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Basing this build on the C-Beam machine XL on the parts store, but added a few things to make it more like the C-Beam XXLarge "Tank" by Dollarz81. Going with the Dewalt 611 instead of a water cooled spindle at first. May change down the road. Using a Panucat Gradus M1 controller with BigFoot drivers.
Openbuilds C-beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11130
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
C-Beam Sphinx Vacuum
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified 1000x1000 Sphinx, with a built in vaccum table.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8262
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
77531
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
![Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019](https://openbuilds.com/data/article_images/l/8/8288.jpg?t=1553609218)
Build Author
obmilllivebuild
Views
10600
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
![Clear Acrylic Dust Shoe](https://openbuilds.com/data/article_images/l/8/8392.jpg?t=1552523209)
Build Author
Cosmosteel
Views
3724
Clear Acrylic Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Large 'Double H-Bot' using Openbuilds 2040 v-slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
![Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)](https://openbuilds.com/data/article_images/l/8/8485.jpg?t=1567627790)
Build Author
viktop
Views
16152
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill.
![Frezar - Desktop CNC](https://openbuilds.com/data/article_images/l/8/8719.jpg?t=1563670637)
Build Author
Fábio Pires
Views
6081
Frezar - Desktop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
![Upgrading Your 3D Printer With Synchronous Leveling](https://openbuilds.com/data/article_images/l/9/9159.jpg?t=1580588676)
Build Author
Keith Davis
Views
8557
Upgrading Your 3D Printer With Synchronous Leveling
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Upgrading printers for Synchronous Leveling
Vulcan Pro V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Contains a further modification to Creality's poor CR-10 design
LEAD 1515, HGH15, SFU1604 Ball Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Project Completed.
![Racoon CNC](https://openbuilds.com/data/article_images/l/9/9623.jpg?t=1605312916)
Build Author
Stokrotka74
Views
5787
Racoon CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
![Ball Screw Carrier.](https://openbuilds.com/data/article_images/l/9/9656.jpg?t=1606782124)
Build Author
Corey Corbin
Views
5189
Ball Screw Carrier.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Create a ball screw carrier with out BF BK bearing blocks.
![Sphinx 55](https://openbuilds.com/data/article_images/l/9/9795.jpg?t=1612990846)
Build Author
Kyo
Views
23105
Sphinx 55
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
![Rigid Compact Desktop C-BEAM](https://openbuilds.com/data/article_images/l/9/9887.jpg?t=1617382213)
Build Author
nickchnv
Views
10367
Rigid Compact Desktop C-BEAM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
![ME - Core XY 3d printer](https://openbuilds.com/data/article_images/l/10/10228.jpg?t=1645120787)
Build Author
Edgar Mata
Views
21040
ME - Core XY 3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted to make my own Voron, so I made my own Voron,
Lead 1515 tilting table and vertical table accessory
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.
INDY-TR12 CNC (12mm Diameter Lead Screws)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.
![Beamlazer Laser cutter CO2 100W](https://openbuilds.com/data/article_images/l/7/7313.jpg?t=1538334383)
Build Author
Kims3DIY
Views
16873
Beamlazer Laser cutter CO2 100W
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.
![C-Beam XL - TinyG - Aluminium Plate - Dewalt 611](https://openbuilds.com/data/article_images/l/4/4285.jpg?t=1485886261)
Build Author
jamesdjadams
Views
11255
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL build using TinyG V8.
![M4: 1510SS Heavy Mk.I](https://openbuilds.com/data/article_images/l/9/9393.jpg?t=1598081959)
Build Author
Rob Taylor
Views
16327
M4: 1510SS Heavy Mk.I
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
![Standalone Torch Height Controller for CNC Plasma Cutting](https://openbuilds.com/data/article_images/l/9/9571.jpg?t=1601852808)
Build Author
Retsaj
Views
54965
Standalone Torch Height Controller for CNC Plasma Cutting
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
![Upgrading the C-Beam machine](https://openbuilds.com/data/article_images/l/3/3473.jpg?t=1464068790)
Build Author
Ronald van Arkel
Views
15397
Upgrading the C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
![300mm Diameter, 1 Meter tall, Delta 3d Printer](https://openbuilds.com/data/article_images/l/6/6136.jpg?t=1515346235)
Build Author
Gerald Klein
Views
14009
300mm Diameter, 1 Meter tall, Delta 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
![Modified Sphinx 55 with MGN12 linear rails](https://openbuilds.com/data/article_images/l/9/9456.jpg?t=1596345440)
Build Author
Wes Dwight
Views
6162
Modified Sphinx 55 with MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
![Rezo 1390 100W CO2 Laser](https://openbuilds.com/data/article_images/l/10/10469.jpg?t=1690408846)
Build Author
jaron kennell
Views
5371
Rezo 1390 100W CO2 Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans
![DIY Flywheel Camera Slider](https://openbuilds.com/data/article_images/l/5/5181.jpg?t=1496883214)
Build Author
Beam
Views
9565
DIY Flywheel Camera Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My take on a non affordable slider.
Little Big OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.
OX 1500x1500 Dual Drive
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ox inspired 1500 x 1500 CNC with belt and pinion drive and lead screw drive options.
KerryH's OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My adventure in CNC routing.
![Micro Ox 2 x 2](https://openbuilds.com/data/article_images/l/1/1903.jpg?t=1426442709)
Build Author
Hytech2k
Views
6078
Micro Ox 2 x 2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Micro Ox Build
![pain in my ox](https://openbuilds.com/data/article_images/l/1/1922.jpg?t=1426948062)
Build Author
dcarlisle
Views
9873
pain in my ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
build is in process the machine went together perfectly no issues at all but the software is another issue I have been trying to get the thing dialed in it is driving me nuts I'm still in the process will update if I ever get it figured out
![openbuilds rovo 1000mmx1000mm(rovo x)(korea)](https://openbuilds.com/data/article_images/l/2/2334.jpg?t=1435463917)
Build Author
inhan
Views
5237
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
![ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile](https://openbuilds.com/data/article_images/l/2/2430.jpg?t=1439504766)
Build Author
zelos
Views
18074
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
C-BEAM 1K
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.
![Pretty Standard + Slave X Axis](https://openbuilds.com/data/article_images/l/2/2567.jpg?t=1442035210)
Build Author
Skoobs
Views
4292
Pretty Standard + Slave X Axis
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Planning my build, just looking for design input at the moment. I definitely want a slave X axis. I am potentially going to go with one of the 1500W Chinese water cooled spindles.
C-Beam Router, 48"x48"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Router using 1500mm lengths, 48x48" build area, and rack and pinion movement.
OX 1000mm Y Axis Upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Expands y-axis to 1000mm. 1/2 day build.
![Neptunes Ox](https://openbuilds.com/data/article_images/l/2/2991.jpg?t=1467556198)
Build Author
Neptunes Guitars
Views
7526
Neptunes Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
![OxZilla](https://openbuilds.com/data/article_images/l/3/3025.jpg?t=1451364835)
Build Author
Gary Bonard
Views
5285
OxZilla
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
![OX / X3 CNC / Similar Z axis / 1605 Linear Actuator](https://openbuilds.com/data/article_images/l/3/3265.jpg?t=1457964143)
Build Author
Colin Russon
Views
8283
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Z axes 1605 ballscrew, a comparative design proposal.
1500 x 1500 mm OpenBuild CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1500 x 1500 mm OpenBuild CNC
20x60 to Dewalt 611 Mount (a.k.a the Rook)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Dewalt 611 Router mount for mounting onto 20x60 v-slot
Atlas Delta Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The idea here is to build a nice large delta bot from the parts ground on the one builds part store. Other parts that are sources out side of this will be detailed. I have a simple BOM I started that I will upload later.
![C-Beam 1000mmx1000mm](https://openbuilds.com/data/article_images/l/3/3390.jpg?t=1460948693)
Build Author
Charles Roseberry
Views
4297
C-Beam 1000mmx1000mm
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam basic package doubled in size.
![MULIMATERIAL 3D PRINTER (in progress)](https://openbuilds.com/data/article_images/l/3/3449.jpg?t=1463382525)
Build Author
Keteland
Views
9894
MULIMATERIAL 3D PRINTER (in progress)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
My 1st C-Beam Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.
Custom Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Custom black and red Big Ox
![10 x 5 ft plazma table build](https://openbuilds.com/data/article_images/l/3/3944.jpg?t=1473520223)
Build Author
Dave420
Views
13226
10 x 5 ft plazma table build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Attaching V Slot or mutable V Slot end on end to a larger steel frame table.
Pure Cbeam 900x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
SUPER OX NEMA 34 1600 OZ Motors!!!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC OX 1500X3000
Linear Rail for Dobot Magician
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This is a simpel build of a Linear rail for the Dobot Magician.
![Budget 1500mm OpenBuilds V-Slot Deltabot Build](https://openbuilds.com/data/article_images/l/4/4396.jpg?t=1485280967)
Build Author
dodgenet
Views
5575
Budget 1500mm OpenBuilds V-Slot Deltabot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
![1500mmx500mm Kossel Delta](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
TouchPadKing
Views
4314
1500mmx500mm Kossel Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...
1000mm X 1000mm with tinyg
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm X 1000mm overhead cnc machine
![Need a catchy name - enlarging CNC](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
McAdam
Views
3074
Need a catchy name - enlarging CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7646
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![Routy based build](https://openbuilds.com/data/article_images/l/5/5072.jpg?t=1495499282)
Build Author
Hisha
Views
4108
Routy based build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Routy based build using 1000mm Y axis beams and 500mm X axis beams. Using a 20x80 Z axis to use the OpenBuilds router mount.
![My C Beam - NEMA 17 - GRBL- Arduino project](https://openbuilds.com/data/article_images/l/5/5076.jpg?t=1503064485)
Build Author
Huub65
Views
7577
My C Beam - NEMA 17 - GRBL- Arduino project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
![3D Printer on Prusa architecture with best parts available](https://openbuilds.com/data/article_images/l/5/5081.jpg?t=1495781202)
Build Author
evgeny156
Views
6447
3D Printer on Prusa architecture with best parts available
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Wanna quet an nice looking device done by my hands
![snc98_Slash-Number-Calculator](https://openbuilds.com/data/article_images/l/5/5117.jpg?t=1495901212)
Build Author
Jens Grabner
Views
3499
snc98_Slash-Number-Calculator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
![1500x1000mm Adjustable Height](https://openbuilds.com/data/article_images/l/5/5289.jpg?t=1499574114)
Build Author
JerryD
Views
4569
1500x1000mm Adjustable Height
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)