Build List
-
Active Filters:
etc
![C-Beam Mini Mite](https://openbuilds.com/data/article_images/l/10/10001.jpg?t=1625194826)
Build Author
Rick 2.0
Views
15095
C-Beam Mini Mite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
139426
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Phlux Core XY Laser Etcher
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.
![Clear Acrylic Dust Shoe](https://openbuilds.com/data/article_images/l/8/8392.jpg?t=1552523209)
Build Author
Cosmosteel
Views
3723
Clear Acrylic Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
![Vox Solid State](https://openbuilds.com/data/article_images/l/6/6030.jpg?t=1513689971)
Build Author
CharlieShimota
Views
14449
Vox Solid State
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
![Workbee](https://openbuilds.com/data/article_images/l/8/8114.jpg?t=1546590616)
Build Author
Christian James
Views
7550
Workbee "style" 1010 cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11740
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
![CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)](https://openbuilds.com/data/article_images/l/6/6421.jpg?t=1520257844)
Build Author
Nicademus
Views
8222
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
![CUT SMITH](https://openbuilds.com/data/article_images/l/6/6396.jpg?t=1520571606)
Build Author
Weldsmith
Views
6773
CUT SMITH
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.
![Quack Ball](https://openbuilds.com/data/article_images/l/6/6614.jpg?t=1519338061)
Build Author
hbtousa
Views
2398
Quack Ball
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
CNC design (parts named)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This design is previously posted in this area. I downloaded the file in order to customize as I needed. I found that the parts were not identified. I went through the design in an attempt to name the parts and identify them by location.
Screen Mesh Stretching
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.
![RiNo Route](https://openbuilds.com/data/article_images/l/2/2577.jpg?t=1442333948)
Build Author
Steven Sampson
Views
9957
RiNo Route
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
![M3Delta](https://openbuilds.com/data/article_images/l/1/1022.jpg?t=1409236449)
Build Author
Limine3D
Views
20826
M3Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer designed in sketchup and includes an adjustable bed.
![MultiBOT LRP](https://openbuilds.com/data/article_images/l/1/1525.jpg?t=1419199885)
Build Author
rusirius
Views
15464
MultiBOT LRP
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)