Build List
-
Active Filters:
tinyg
Build Author jamesdjadams Views 11385
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
C-Beam XL build using TinyG V8.
Build Author ymilord Views 17825
Small Portable PCB CNC Machine (CoreXY)
This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.
Ooznest OX, Workbench, & Folding Table
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
Triangular CNC Milling Machine
A wonky build to eliminate slop on a long Z axis
Build Author eddyg Views 4282
OX with a Custom Electronics Case
Embarking on my first build and trying to start with a clean setup by creating an enclosure box for my controllers and power supply.
c-beam hello world
My first ever build. Straight C-beam with tinyg controller a few do-dads and some make do choices. Non-metric length lead screws to save long lead time. Jog knobs to cover the extra length and also practical. My old Bosch Colt never had it so good. Build out work remains, wire dressing, drag chain, vacuum, permanent base, etc.
Build Author Bridge Port Views 7942
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Rwetzler Views 8295
C-Beam Prototype
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Screaming Ox CNC Machine
Big brother of the Charging Ox CNC machine.
Build Author alex_b Views 14439
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author Pendragon Views 9671
bOX
A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.
Build Author Zootalaws Views 5862
OXENlarged
This is a 1500 x 1500 Ox build