Select a Category
Build Author Mark Carew Views 8174
High Z Mod for Lead CNC
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
Build Author Mark Carew Views 33954
BlackBox Motion Control System
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author that-jim Views 6212
LINEAR RAIL SPHINX 55 (Blue OX plates)
Machine based on Sphinx 55 built with linear rails.
Build Author Nomad1 Views 528
Black Box/ Power supply brackets
This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together
Build Author Kenneth Witthuhn Views 4600
Openbuilds CNC (witthuhnCNC XKLBR-1S)
Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.
Build Author GinoTheCop Views 8883
A 1000 by 1000 CNC Router with linear rails and a control box.
Build Author RegPye Views 1612
Plasma CNC machine
The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.
Build Author Bruce Walker Views 1968
BD's Burn Box - ACRO Laser Engraver System
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
Build Author RobertCanthal Views 2523
My C-Beam machine...
A C-Beam machine design, strengthened with extra brackets and plates. GRBL controlled, opto-isolated inputs, jogging box.
Build Author tmadrms Views 2365
C-beam machine mods.
Build Author RV6APilot Views 2199
South Carolina Workbee 1000X1000
This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.
Build Author RoosterTX Views 3073
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Build Author Savvas Views 12333
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author James Evanko Views 1771
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author Hussein Dermay Views 3728
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Build Author eddyg Views 3299
OX with a Custom Electronics Case
Embarking on my first build and trying to start with a clean setup by creating an enclosure box for my controllers and power supply.
Build Author seedorff Views 2183
A simple made hideaway for ugly electronics
Build Author Tim Pierce Views 9704
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Iwan Müller Views 3690
Controlbox for a CNC Router
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Build Author Asaku Views 6878
Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )
Build Author Paruk Views 15737
A 3D Scanning Station
Build Author robbell Views 3676
Cancelled - Modified OX CNC for Mitre Cutting (Picture Framing)
Creating a CNC mitre (45°) cutter, for picture frame cutting. Starting with an OX, but inverting various parts and adding a material table, with a stepper-controlled measuring guide.