Build List
-
Active Filters:
all
zero z mongrel
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
long overdue overhaul of 1000 x 1000 machine
![](https://openbuilds.com/data/article_images/l/10/10451.jpg?t=1709116929)
Build Author
EvanH
Views
1600
"Hawk" Heavy-duty dual-Z pseudo C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A compact, strong machine with very high Z clearance, yet can still mill aluminium easily.
![Sphinx Upgraded plates / ballscrews and linear rail](https://openbuilds.com/data/article_images/l/8/8026.jpg?t=1544899696)
Build Author
Troy Proffitt
Views
24419
Sphinx Upgraded plates / ballscrews and linear rail
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
LR/BS CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An easy to source/easy to build, yet quite robust CNC router. This design has not yet be implemented.
![300mm Diameter, 1 Meter tall, Delta 3d Printer](https://openbuilds.com/data/article_images/l/6/6136.jpg?t=1515346235)
Build Author
Gerald Klein
Views
14007
300mm Diameter, 1 Meter tall, Delta 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
![M4: 1510SS Heavy Mk.I](https://openbuilds.com/data/article_images/l/9/9393.jpg?t=1598081959)
Build Author
Rob Taylor
Views
16325
M4: 1510SS Heavy Mk.I
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
![ALl included interface](https://openbuilds.com/data/article_images/l/10/10441.jpg?t=1680974870)
Build Author
Sigifredo Cruz Rojas
Views
3078
ALl included interface
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I have not too much space and need a portable solution, and tired of cleaning the electronics I decide to put everything inside a box and this is the result.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16776
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
![THE delta](https://openbuilds.com/data/article_images/l/7/7854.jpg?t=1542448684)
Build Author
deltajegga
Views
8519
THE delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
probably as big as you'd want it...
SolidCore CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
All metal CoreXY 3D Printer Design with triple z, kinematic bed, and scalable corexy mechanism.
![The Growler](https://openbuilds.com/data/article_images/l/8/8277.jpg?t=1550076583)
Build Author
Scott Martinez
Views
10363
The Growler
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20349
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
![Linear Rail CNC Machines](https://openbuilds.com/data/article_images/l/1/1771.jpg?t=1428529929)
Build Author
sgspenceley
Views
186379
Linear Rail CNC Machines
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC build using linear rails & lead screws.
CubeFoot CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
![SolidCore CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/9/9334.jpg?t=1588996964)
Build Author
shanehooper
Views
12750
SolidCore CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular and Scalable CoreXY Printer with all metal parts.
PnP 4 axis small/fast machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
![Evil Ox](https://openbuilds.com/data/article_images/l/3/3328.jpg?t=1459106425)
Build Author
evil2002usna
Views
10534
Evil Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cheap Ballscrew Ox CNC Router.
HD CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy Duty build with 1605 Ballscrew and Linear Rail
![The BlackBee CNC](https://openbuilds.com/data/article_images/l/9/9848.jpg?t=1615570664)
Build Author
CNCGear
Views
8742
The BlackBee CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ball screw drive, linear rail CNC Kit
![Gantry Style CNC from plywood](https://openbuilds.com/data/article_images/l/7/7777.jpg?t=1614892591)
Build Author
C-CNC
Views
12642
Gantry Style CNC from plywood
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am currently 15 years old, from Germany and trying to build a low budged CNC router. I only designed this CNC based on other CNC routers that I have seen and what I am able of. It consists mostly of 2.3cm plywood to keep costs down. The size of the work area is approx. 40 x 80 cm. I would be really glad if you could give me advice's for improvement on the design and everything else ... ( I could really need your help :) ) enjoy :)
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8649
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
![Ball Screw Carrier.](https://openbuilds.com/data/article_images/l/9/9656.jpg?t=1606782124)
Build Author
Corey Corbin
Views
5188
Ball Screw Carrier.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Create a ball screw carrier with out BF BK bearing blocks.
![TITAN GAMBIT](https://openbuilds.com/data/article_images/l/9/9601.jpg?t=1603441150)
Build Author
Colin Russon
Views
3093
TITAN GAMBIT
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Anti-Twist Design, larger lead screws, enhanced M8 wheel sets.
![OrionPlus](https://openbuilds.com/data/article_images/l/9/9394.jpg?t=1593570848)
Build Author
Yosmany325
Views
1658
OrionPlus
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cartesian style CNC with a working area of around 360mm x 360mm x 120 mm (X, Y, Z) using Linear rails and ball screws. The linear rails are (Hiwin?) HGR 20mm x 520mm and the ball screws are SFU1204 (12mm lead 4mm) of around +/- 430 mm. The base structure is made from rectangular aluminum profiles of 70mm x 45mm x 3mm (thickness of walls).
![Sphinx Z-axis upgrade](https://openbuilds.com/data/article_images/l/7/7512.jpg?t=1539834608)
Build Author
Andreas Bockert
Views
10580
Sphinx Z-axis upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
1515 Deluxe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.
![Paintbot painting cnc](https://openbuilds.com/data/article_images/l/9/9266.jpg?t=1584976841)
Build Author
Alexander Leiser
Views
13796
Paintbot painting cnc
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Custom painting machine in designed and wrote the software for. Paintings are with acrylic color on canvas
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278858
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8261
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![Dual Extruders 3D Printer - Zidex Upgraded](https://openbuilds.com/data/article_images/l/9/9102.jpg?t=1578282133)
Build Author
David Florian
Views
8734
Dual Extruders 3D Printer - Zidex Upgraded
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11128
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
![Workbee CNC on steroids](https://openbuilds.com/data/article_images/l/8/8959.jpg?t=1571948917)
Build Author
Vunnie
Views
5873
Workbee CNC on steroids
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
![Laser Displacement Golf Ball Scanner](https://openbuilds.com/data/article_images/l/8/8728.jpg?t=1564151634)
Build Author
James Evanko
Views
5744
Laser Displacement Golf Ball Scanner
![](https://openbuilds.com/data/article_cat_images/s/0/298.jpg?t=0)
Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.
EOX v2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgrading my CNC router to run on ball screws. Me and the belts where not getting along.
ricks workbee build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
i had the ox build and wanted to do a more beeffer style so i went with a workbee style machine ..
![CNC FOR EVERYONE!](https://openbuilds.com/data/article_images/l/0/596.jpg?t=1399598080)
Build Author
John J Talavera
Views
17426
CNC FOR EVERYONE!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
![Delta250](https://openbuilds.com/data/article_images/l/7/7930.jpg?t=1543525836)
Build Author
thinman
Views
7407
Delta250
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A 250x250 mm Delta Printer utilizing a Duet Wifi controller and a Titan Aero direct drive extruder.
![MEGADELTA, TLM CLONE with 500MM bed](https://openbuilds.com/data/article_images/l/8/8257.jpg?t=1549700418)
Build Author
patnap71
Views
5750
MEGADELTA, TLM CLONE with 500MM bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
All metal frame 500mm bed Delta 3D printer
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
![DIY C-Beam CNC](https://openbuilds.com/data/article_images/l/6/6586.jpg?t=1519158852)
Build Author
TurfnSurf
Views
5993
DIY C-Beam CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
![Shapeoko 2 Z-Axis Upgrade](https://openbuilds.com/data/article_images/l/7/7937.jpg?t=1543591061)
Build Author
joetemus
Views
5455
Shapeoko 2 Z-Axis Upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
OXmill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Small Mill type CNC machine, using C-Beams and V-Slot rail, bundle packs as a starter point. I needed a smallish desktop machine to fit a pretty narrow use case for my business, but the machine itself has larger applications to the OB community. Currently I will run the Dewalt 611 router on the Z axis, but have plans to add in a brushless RC style motor. So this design does have room to go either way easily.
Delta without vertices
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
As this is a build in progress, I will update it as I progress.
Brice's CNC Router Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.
![Ball Trajectory Machine](https://openbuilds.com/data/article_images/l/7/7887.jpg?t=1542989748)
Build Author
James Evanko
Views
3197
Ball Trajectory Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
![KYO SPHINX a la' SCYBUCK](https://openbuilds.com/data/article_images/l/7/7717.jpg?t=1539666910)
Build Author
SCYBUCK
Views
4386
KYO SPHINX a la' SCYBUCK
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
KYO SPHINX, CENTROID ACORN, GECKO 540, HALL EFFECT LIMIT SWITCHES, 2.2 KW, 24,000 RPM SPINDLE, WATER COOLED, 600 oz-in STEPPERS, INTENDED TO CUT ALUMINUM.
![Sphinx Evolution](https://openbuilds.com/data/article_images/l/6/6390.jpg?t=1520123783)
Build Author
Michael.M
Views
8495
Sphinx Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
![OX / X3 CNC / Similar Z axis / 1605 Linear Actuator](https://openbuilds.com/data/article_images/l/3/3265.jpg?t=1457964143)
Build Author
Colin Russon
Views
8282
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Z axes 1605 ballscrew, a comparative design proposal.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23799
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
![3-Axis Plywood CNC](https://openbuilds.com/data/article_images/l/6/6478.jpg?t=1518460571)
Build Author
TurfnSurf
Views
5223
3-Axis Plywood CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
![Bucky CNC](https://openbuilds.com/data/article_images/l/6/6790.jpg?t=1520221772)
Build Author
Bucky Wootmaster
Views
2299
Bucky CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC machine using extrusions with linear rails and ball screws on all axes - no plates
Ox Stainless with ballscrews
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
![Composer](https://openbuilds.com/data/article_images/l/4/4745.jpg?t=1517337429)
Build Author
Chetan PM
Views
3083
Composer
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Gantry style rigid build
![3d printed 2.5' X 2.5' cnc plasma cutting machine](https://openbuilds.com/data/article_images/l/1/1865.jpg?t=1425780796)
Build Author
brw_racing
Views
14605
3d printed 2.5' X 2.5' cnc plasma cutting machine
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Improvements to a cnc plasma cutter i designed a while back. Not that it really needs it to work but i think it could be an improvement.
Linear Rail derivative with ball screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
basic start to design of cnc machine
Sandy3D wall mounted 1000 mm x 1000 mm C Beam Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I am attempting to mount The C-Beam Machine XLarge on the wall and have it look like a piece of art and be totally functional as this will be in our livingroom.
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
6057
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
MiniMill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a small mill to match my 7x12 lathe.
![3D Printer on Prusa architecture with best parts available](https://openbuilds.com/data/article_images/l/5/5081.jpg?t=1495781202)
Build Author
evgeny156
Views
6446
3D Printer on Prusa architecture with best parts available
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Wanna quet an nice looking device done by my hands
![Budget 1500mm OpenBuilds V-Slot Deltabot Build](https://openbuilds.com/data/article_images/l/4/4396.jpg?t=1485280967)
Build Author
dodgenet
Views
5574
Budget 1500mm OpenBuilds V-Slot Deltabot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
![The](https://openbuilds.com/data/article_images/l/3/3100.jpg?t=1454389309)
Build Author
Julius
Views
7438
The "Hand" CNC (or OXCarve)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
more to come, please follow along the journey!
Delta 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a Delta build using 1610 ballscrews from China
![OxZilla](https://openbuilds.com/data/article_images/l/3/3025.jpg?t=1451364835)
Build Author
Gary Bonard
Views
5284
OxZilla
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
![MIY OLY Delta Printer](https://openbuilds.com/data/article_images/l/2/2280.jpg?t=1443637173)
Build Author
KBill
Views
12345
MIY OLY Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mag arm deltabot with laser cut carriages and connectors.
Vic Aussie Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Dove in and ordered the kit from Makerstore in Melbourne. While awaiting for the order watched videos and sourced steppers and controllers from China. Had some fun with the 4 axis TB6600 controller board. Ran into a few problems with the build, but after stripping and restarting looks like I am on track.
Hybrid OX (Ball Screw, Linear Guides, Ect.)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Planning my first build. Hope to achieve a larger format yet rigid design.
CNC Jr.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small, quiet and clean desktop CNC designed for fine cutting.
![CNC FOR EVERYONE TITAN CNC ROUTER](https://openbuilds.com/data/article_images/l/0/730.jpg?t=1399677926)
Build Author
John J Talavera
Views
10993
CNC FOR EVERYONE TITAN CNC ROUTER
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)