Select a Category
Build Author piyawat thongchan Views 302
Draw bot core xy
In the design stage. Help guide.
Build Author Robert E. Nee Views 5870
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
Build Author Zackattack011 Views 251
1 Cubic Meter 3D Printer
This is a at home built 1000mm x 1000mm x 1000mm 3d printer. It uses mainly parts from OpenBuild Parts and is very simple to build. The only thing that was custom was the build plate which was designed by myself and tooled at a local machine shop.
Build Author h3rb Views 321
TEVO Little Monster Direct Mount Extruder
Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder
Build Author Naomi Wu Views 1859
Naomi Wu's Automatic Bartender- BarBot!
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
Build Author Carl Feniak Views 196796
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author Elxiliath Views 595
D-Bot Version B
D-Bot with a Replicate controller.
Build Author JCPhlux Views 9988
Large Core XY 3d Printer W/fixed build plate
Build Author Keith Davis Views 20260
A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.
Build Author Sam Price Views 1006
Acros with customizations [WIP]
This is a work in progress ACROS build with new legs and wire tracks.
Build Author Terone Burgenheim Views 1391
CoreXY - Tower Printer
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
Build Author MikeBardsley Views 5855
Fast, Large build area, CoreXY design
Build Author Troy Proffitt Views 13431
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author Ryan James Views 8806
A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.
Build Author maverickccie Views 8727
D-BOT With Mods
What a way to learn about 3D printing
Build Author Giarc Views 4248
Another slight variation of Niko's Eggbot using Openbuilds V-slot and other 3d printed parts.
Build Author evgeny156 Views 2512
OB Minimill with bottom frame PSU+Drivers
All-in-one OB Minimill
Build Author Roberts Kristins Views 2147
Core XY My-BOT 500 x 500 x 1000
My first construction after many years buys ready devices.
Build Author kallibaba Views 7280
Two color Drawmachine
GRBL, vvvv, drawbot, penchanger, custom plates
Build Author Arunkumar Views 5254
Polar Bot which used to depress buttons
Build Author Venturebit Views 2259
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author runninfarmer Views 8681
Build Author Rob Altenburg Views 7830
Rob's D-Bot Build
The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.
Build Author mirage335 Views 4119
Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.
Build Author Giuliano M Views 35129
H-Bot CoreXY Cube
Build Author Anglesachse Views 16327
My version of the Mug Plotter designed by Teed http://edinburghhacklab.com/ . Also used the Eibotboard from the original eggbot from evilmadscientists http://shop.evilmadscientist.com/partsmenu/188-ebb A huge thanks to Hexitex for his brilliant Four jaw chuck http://www.thingiverse.com/thing:5791
Build Author Mark Carew Views 36943
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
Build Author gianakop Views 25185
Niko’s Egg-painter robot (OpenBuilds)
This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)
Build Author nschreiber0813 Views 2613
Schreibotics Fabricator MkII
It all started after my prusa i3 build inspired me to experiment with resin 3D printers because I want to learn if they are worth it and if I can design my own printer.
Build Author adamcooks Views 33244
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
Build Author Eric Kiser Views 5273
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author mikethebomber Views 6576
A humble first time attempt at building a 3d printer from scratch
Build Author techmod Views 4577
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author dodgenet Views 3033
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author kallibaba Views 1931
Linear Rail for Dobot Magician
This is a simpel build of a Linear rail for the Dobot Magician.
Build Author Jose A. Molina Views 3444
Remote Controlled Robot Spider(Teaching Tool)
This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.
Build Author Power Playground Views 2163
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
Build Author Tim Pierce Views 6642
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Kaarbble Views 7554
Kaarbble Nylon Bot
We plan experiment on nylon 3 D printing;
Build Author mrtinkerer Views 11387
V-slot and MDF DeltaBot
This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.
Build Author Keith Davis Views 7412
This is a simple, yet rugged design, weighing only 6 lbs and with 13x13x14" volume with a 8x8x6" build area. While assembly is pretty simple, the small size and rigidity of the design make shipping assembled printers attractive.
Build Author sergeysapiro78 Views 2721
Zen3D Atlantis 3D printer, H-Bot mechanics
H-Bot mechanics 3D printer. Build volume - 300x300x300mm dimensions: 560x500x500mm
Build Author Bon Thomassen Views 9114
D-Bot CoreXY printer
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
Build Author runninfarmer Views 8476
A minimum parts build with belt driven Z-axis.
Build Author UltiBots Views 6375
Machined Aluminum MagBall Carriages
Machined Aluminum MagBall Carriages
Build Author Sheepdog Views 20036
Griffin Delta Printer
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
Build Author Midgetmountain Views 13523
The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.
Build Author UltiBots Views 8779
Metal MagBall Carriage
UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.
Build Author eddiejr Views 3447
Eddie's Build of Niko's (gianakop) Egg Painter
This is my build of Niko's (gianakop) Egg Painter. Egg decorating is something many Christians do for Easter Sunday and the Easter (Paschal) Season that follows. This will be my initial use for the build, but also with minimal modification to be able to write/paint on other round objects like Christmas ornaments, coffee mugs, etc. Many people also decorate eggs for purely secular reasons.
Build Author blindflight Views 3680
After seeing different egg bots designs, I decided to incorporate my own design.
Build Author TomH Views 11160
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author UltiBots Views 14029
Kossel 250 V-Slot
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author Filipe Jose Views 14863
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Build Author mirage335 Views 5232
Mega-sized Taz machine. Supports many tools (extrusion, laser, mill, etc) simultaneously.
Build Author KBill Views 9376
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Build Author Ulnad Views 10290
Delta Bot: Improved DIY 3D Printer
Build the efficient and reliable all metal structure 3D Printer. Improved significantly with new concepts for printers. Great quality and up to 400 mm/s print speed (very fast). Built with heated bed, hybrid bowden suspended extruder, and counterweight (tested printing 21 hours straight with no motors hot). Optional smart controller for computerless printing. Print any kind of thermoplastic.
Build Author nidal Views 9229
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author pdesigns Views 12086
This is a work in progress 3D printer Dimensions are 230x230x340mm height. Print dimensions are: 135x135x160mm. Prototype has a bowden extruder with a J-head hotend. Assembly instructions: http://reprapstyle.blogspot.pt
Build Author violan Views 5017
3D Printer DELTA
Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed
Build Author Josh Mascote Views 4788
Z3D Delta Printer
Berrybot inspired delta 3d printer with a few other tweaks and modifications.
Build Author Mohsen Abbasi Views 2379
For all other builders and robotic technies!