Welcome to Our Community

Some features disabled for guests. Register Today.

      1. Build Progress:
        • Build in Progress...
      Rate This Build
      5/5,
      1 votes
      We've only just begun... Just updated the BOM. Realized I needed to tweek a few things for the design.
      Here's the video explaining what we want to do and why.
      We've got some great sponsors on board. More to come, too!
      Vlog 002, where we give out a status report, and welcome some more sponsors!
      1. Special Notes

        This is a re-imagining of the original David Spaulding design found here on Thingiverse http://www.thingiverse.com/thing:1001065
        This is configured using the 300 mm square build plate cut sheet located in the appendix of the build manual, and extending the z-height of the entire build to 660 mm to accommodate a taller lead screw (500 mm)
        This entire project was also re-cut as far as the BOM making Openbuildspartstore the priority for all parts. Bear in mind, looking at the BOM there is a significant cost increase in some areas. This is due to me acquiring some generous sponsors in certain areas, such as the hot end, controller board, and extra power supply for the 300mm heated bed. You can accomplish this project for a lower price point.
      Madyn3D CNC and Mark Carew like this.
  • Loading...
  • Build Details

    Build License:
    • CC - Attribution NonCommercial - Share Alike - CC BY NC SA

    Reason for this Build

    two-fold: One, to build for our 3d Printing Youtube channel Neoportnoy 3d Printing. The second is to show people how doable the project is between a son and daughter
  • Attached Files:

  • Attached Files:

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice