Build List
-
Active Filters:
20
![M4: 1510SS Heavy Mk.I](https://openbuilds.com/data/article_images/l/9/9393.jpg?t=1598081959)
Build Author
Rob Taylor
Views
16327
M4: 1510SS Heavy Mk.I
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20349
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40824
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
![Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019](https://openbuilds.com/data/article_images/l/8/8288.jpg?t=1553609218)
Build Author
obmilllivebuild
Views
10600
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
V-Slot 2020 EggBot
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
To build a simple EggBot
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8650
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
![Ball Screw Carrier.](https://openbuilds.com/data/article_images/l/9/9656.jpg?t=1606782124)
Build Author
Corey Corbin
Views
5189
Ball Screw Carrier.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Create a ball screw carrier with out BF BK bearing blocks.
![Lead CNC 1510 modified](https://openbuilds.com/data/article_images/l/8/8843.jpg?t=1572455082)
Build Author
Marco964
Views
7951
Lead CNC 1510 modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
Bored in the garage enclosure build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
![GTC2020](https://openbuilds.com/data/article_images/l/9/9100.jpg?t=1580207267)
Build Author
GinoTheCop
Views
13485
GTC2020
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000 by 1000 CNC Router with linear rails and a control box.
![Emmett-Delta](https://openbuilds.com/data/article_images/l/3/3052.jpg?t=1452293030)
Build Author
David Bunch
Views
13759
Emmett-Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15181
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![Openbuilds rovo laser mini(오픈빌드)](https://openbuilds.com/data/article_images/l/2/2095.jpg?t=1430628083)
Build Author
inhan
Views
19900
Openbuilds rovo laser mini(오픈빌드)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8262
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
20110
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
15121
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7646
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23192
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Butterfly 3DP V 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
tronxy x3 like
![Shapeoko 2 Z-Axis Upgrade](https://openbuilds.com/data/article_images/l/7/7937.jpg?t=1543591061)
Build Author
joetemus
Views
5455
Shapeoko 2 Z-Axis Upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
![WorkBee 1000x2000 ACME Screw Version](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Axnfell
Views
2324
WorkBee 1000x2000 ACME Screw Version
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...
![Live C-Beam Build @ MRRF2018](https://openbuilds.com/data/article_images/l/6/6899.jpg?t=1521464284)
Build Author
obmilllivebuild
Views
4765
Live C-Beam Build @ MRRF2018
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
![C-Beam Rigid - 'The Hog'](https://openbuilds.com/data/article_images/l/3/3039.jpg?t=1493136162)
Build Author
ymilord
Views
21499
C-Beam Rigid - 'The Hog'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12985
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
OXilla - a 3ft x 3ft CNC Router/Mill - Goals are strength, power and speed
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This will be an ongoing log as I build this machine. Name change by popular demand - at least a couple of us. :)
![Delta-Six ( Jerry426 variant )](https://openbuilds.com/data/article_images/l/4/4005.jpg?t=1475265264)
Build Author
Martin Bogomolni
Views
10809
Delta-Six ( Jerry426 variant )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
![2020 First build.](https://openbuilds.com/data/article_images/l/4/4989.jpg?t=1500598962)
Build Author
THE LINK
Views
4314
2020 First build.
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Probably cheapest DIY build youl see.
![1500x1000mm Adjustable Height](https://openbuilds.com/data/article_images/l/5/5289.jpg?t=1499574114)
Build Author
JerryD
Views
4569
1500x1000mm Adjustable Height
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
Delta-Six
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super rigid Delta printer, using 20X40 V-Slot
![3D Printer on Prusa architecture with best parts available](https://openbuilds.com/data/article_images/l/5/5081.jpg?t=1495781202)
Build Author
evgeny156
Views
6447
3D Printer on Prusa architecture with best parts available
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Wanna quet an nice looking device done by my hands
![M3D Squared](https://openbuilds.com/data/article_images/l/4/4583.jpg?t=1487205483)
Build Author
Limine3D
Views
7641
M3D Squared
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
delta 3d printer kit
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
HE3D K200 kit build
![Folger-Tech Y-Carriage](https://openbuilds.com/data/article_images/l/2/2848.jpg?t=1448208474)
Build Author
Sonny Lowe
Views
9859
Folger-Tech Y-Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
![V-Slot Cutting System](https://openbuilds.com/data/article_images/l/2/2138.jpg?t=1431475871)
Build Author
Kyo
Views
11291
V-Slot Cutting System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
McRouter 3 Axis CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.
![V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES](https://openbuilds.com/data/article_images/l/1/1949.jpg?t=1433097153)
Build Author
Darren Ditto
Views
9595
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)