Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    a

Improved CBM

Dec 9, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.

The Plastic Beast CoreXY Printer

Feb 28, 2018
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.

Textile Drawing Machine

May 4, 2018
Category
Other Style DrawBot
Build Progress
Build Complete!

Textile Drawing Machine is a drawing machine thought specifically to draw on textile. Unlike other CNC machine it's dimensions follow the standard textile dimensions (1500mm) and it's on wheels to allow to draw on an unlimited area. TDM has been developed for the project Digital Wax Print, a self initiated research project, carried out by The Future Continuous, a collabration between Olivia De Gouveia and Eugenia Morpurgo.

LEAD CNC 1010 (40" x 40")

Nov 24, 2023
Category
CNC ROUTER
Build Progress
Build Complete!

The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!

1510 Workbee Modified

Jan 22, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.

CNC ESS Controls System

Jan 22, 2019
Category
Everything Else
Build Progress
Build in Progress...

My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.

Simple Cnc System (arduino Grbl)

May 25, 2019
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.

Suitcase Vacuumformer

Dec 5, 2013
Category
Small Vacuum Former

Quick overview of my build up for a vacuum former that is self contained, portable and fairly easy to build.

Richrap 3DR Mashup

Dec 31, 2013
Category
Delta Bots

A work in progress. working to refine the print head/carriage to integrate a bed level probe directly into the print head.

Vslot Kossel

Apr 15, 2014
Category
Delta Bots
Build Progress
Build Complete!

Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR

myOX : a 4' x 2' OX CNC with potential

Mar 14, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM

Black Panther QR

Mar 3, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The QuadRap 3D printer version based on OpenBuilds wheels. Born in https://plus.google.com/u/0/communities/103539262895202172380

cnc plasma table

Apr 5, 2015
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer

Plasma cutter - 608 on steel tube version

Apr 20, 2015
Category
Plasma Cutter Builds
Build Progress
Build in Progress...

CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project

CNC Router Lathe

Feb 11, 2018
Category
Other Style CNC Mills
Build Progress
Build Complete!

Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.

Pot Plotter

Jun 16, 2015
Category
Sphere Bots
Build Progress
Build Complete!

My version of the Mug Plotter designed by Teed http://edinburghhacklab.com/ . Also used the Eibotboard from the original eggbot from evilmadscientists http://shop.evilmadscientist.com/partsmenu/188-ebb A huge thanks to Hexitex for his brilliant Four jaw chuck http://www.thingiverse.com/thing:5791

MakerSL MSL-5 Cantilevered 3D Printer

Jun 23, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

Roberta Clementine

Jun 9, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

The Roberta Clementine a proof of concept and progenitor to the series of printers I will be calling the Clementine Sisters. The printer is named after Pittsburgh Pirates baseball player Roberto Clemente. Although it is more accurate to say the printer is named after the school I work for which is named after Clemente the Roberto Clemente Charter School. http://www.myrccs.com Roberta is the first and not really built to last but instead built to test ideas and to produce the parts for successors

Black Rabbit 1500

Sep 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.

C-Beam to C-Beam XL Upgrade

Dec 27, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.

CNC Control Box with VFD etc etc

Jan 6, 2019
Category
Everything Else
Build Progress
Build in Progress...

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

Adjustable Router Guide Template

Feb 9, 2017
Category
Everything Else
Build Progress
Build Complete!

This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

Build #2 - Bigger & Stronger

Jan 11, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9

Halloumi CNC Machine - Acetal Plates

Oct 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.

Joe Harris's all metal CNC Router build

Dec 4, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!

Opening into doors

Jan 29, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.

C-beam Machine - Modesty

Mar 18, 2024
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Modified C-beam Machine. Taller (30 cm) C-beam uprights in gantry, and longer 750 mm frame in Y direction. XL gantry plate on X (and Z?). Y will have additional 700 mm SBR16 rails as extra support and slightly raised bed to fit above stepper motor. Approx. machinable area of 370 x 370 mm.

Sphinx Evolution

Mar 3, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.

Lab Power Supply + Soldering Station

Mar 14, 2018
Category
Everything Else
Build Progress
Build Complete!

A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron

CoreXY - e3d inspired

May 1, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.

A custom arcade

Jun 19, 2020
Category
Furniture Builds
Build Progress
Build Complete!

This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.

C-Beam Mini Mite

Jul 9, 2022
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.

Portable self-contained Lead 1010 table

Jul 18, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

I have a two car garage NOT devoted to 3d printing or CNC. I have set aside a space for my 3d printer and a place to store my portable CNC table. The reason it’s portable is so that I wheel and can use my Lead 1010 outside where it won’t make a mess in the garage. The table is self contained. It houses a vac system as well as my CNC tools and supplies.

My Lead 1010

Mar 18, 2024
Category
Other Style CNC Mills
Build Progress
Build Complete!

This is a fully loaded Lead 1010 and located in a shed measuring 3 by 2.50 meters. Here i build my guiyats by hand and the help of my Openbuilds friend! Pure for hobby.

Griffin Delta Printer

Mar 9, 2014
Category
Delta Bots
Build Progress
Build Complete!

Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.

Ultimo

Jul 26, 2014
Category
Delta Mills / Stewart Platforms
Build Progress
Build in Progress...

Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.

CubeSpawn Ultimaker 3D Printer Module

Sep 15, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker

Long Ox with drop in table

Jun 1, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.

Ox with Gecko Controller and CNC Linux

Dec 26, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice