Welcome to Our Community

Some features disabled for guests. Register Today.

      1. Build Progress:
        • Build in Progress...
      Rate This Build
      1 votes
      The main frame is made from a Misumi extrusion kit. The linear motion rails are all OpenBuilds parts. The Z-axis is OpenRails and the X- and Y- Axis are both using V-Slot rails with a Rack&Pinion style belt setup which is described on this site. This is still a work in progress but for the most part it is finished.

      The build envelope is about 8x10x12 but that will soon be growing once I redesign the X-axis to something a little less chunky.

      My first (though technically third) printer was inspired by Mark's ideas. You'll find a picture of it in the ablum. It worked VERY well, but I wanted to enclose it in the future and given the dynamics of it, I didn't see how that would be possible.

      Because most of my images are too large to be on here, I made an imgur album that you can view here


      Attached Files:

      CubeSpawn and spark2 like this.
  • Loading...
  • Build Details

    Build License:
    • CC - Attribution NonCommercial - CC BY NC

    Reason for this Build

    Because I wanted a 3D printer

    Inspired by

    Mark Carew
  • Parts list

    Qty Part Name Part Link Comments
    1 1500mm 20x40 V-Slot http://openbuildspartstore.com/black-v-slot-20-x-40mm/ Link