Select a Category
Build Author pedrofernandez Views 1643
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
Build Author Peter Stoneham Views 1718
Large 'Double H-Bot' using Openbuilds 2040 v-slot
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
Build Author Fábio Pires Views 301
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
Build Author Keith Davis Views 487
A posi-drive leveling printer in 300x300x380mm format that easily breaks down for suitcase size shipping.
Build Author Anthony Bolgar Views 208
CBeam Sphinx Upgrade
Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.
Build Author crypt-tek Views 3004
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Build Author Ticky-Tack Views 2965
Photogrammetry 3d Scanner
A mid-sized version of a Photogrammetry 3D Scanner.
Build Author pedrofernandez Views 1818
The Franken Rotor
Yes another K40 Franken machine dedicated for round objects,,,
Build Author viktop Views 4595
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
An OX-inspired mini desktop mill.
Build Author Kazeki Views 683
Upgrading my CNC router to run on ball screws. Me and the belts where not getting along.
Build Author checkeredBug Views 1335
Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.
Build Author CChico Views 9465
Custom build 80w Co2 Laser Cutter
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
Build Author Patto21 Views 233
Large format laser
Large format laser build for Student use at my school as well as some personal use.
Build Author KronBjorn Views 538
WorkBee Lead 1010, Reduced Footprint, Nema17
This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.
Build Author Cody Kesler Views 515
Vacuum laser table
Large 10’x6’ vacuum table made from steel tubing and 1/4 inch steel plate
Build Author Todd Brous Views 385
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
Build Author Roy Berntsen Views 1339
V-Baby CoreXY - DIY 3d Printer
Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers
Build Author Mark and Oreo Views 147
Cnc od grinder and thread grinder
This is a totally original build of an od id grinder and thread grinder, I hope.
Build Author sausagePaws Views 1165
DIY Embroidery Machine V2
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
Build Author Max Tepermeister Views 21617
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
Build Author Mark Carew Views 70255
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author RV6APilot Views 929
South Carolina Workbee 1000X1000
This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.
Build Author BooTec Views 999
DIY CNC Machine
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
Build Author Cortellini Views 510
The FEEDBACK FRACTAL Armature Build
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
Build Author David Bourne Views 2218
INDY-TR12 CNC (12mm Diameter Lead Screws)
TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.
Build Author Neil Rosenberg Views 1267
Dash-X 3D Printer: Innovative design
Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.
Build Author petethepig Views 1207
OpenBuilds ACRO Z Axis
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
Build Author Stan Howe Views 481
Bee the Boss
The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.
Build Author gibson Views 306
ricks workbee build
i had the ox build and wanted to do a more beeffer style so i went with a workbee style machine ..
Build Author Michael Guerra Views 107
Taller couch legs
A simple but elegent couch legs
Build Author ANDERS NORLINDER Views 476
Cnc mill, Plasma cutting and weld table
A functional table for plasma cutting, welding, tooling........
Build Author pauna Views 1867
My giant "WORKBEE" 1750mm X 1750mm by ooznest
CNC MACHINE WORKBEE'S table making
Build Author shanehooper Views 2526
Workhorse 3D Printer
Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source
Build Author viktop Views 2663
Simple Cnc System (arduino Grbl)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
Build Author MarkM_NJ Views 11666
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Build Author Mark Carew Views 26524
OpenBuilds LEAD CNC
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
Build Author Cortellini Views 1723
the Feedback Fractal project
The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.
Build Author Sebastian-Schuetz Views 6808
Open source large format CNC-machine and 3D printer
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
Build Author infectedfpv Views 1085
3D printed Laser Engraver
i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area
Build Author Mark Carew Views 98416
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author Shortyski13 Views 834
Mushu - Large Scale CoreXY
20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.
Build Author Ollieg Views 378
Hevavy duty 1300mm x 1300mm laser cutter Ceramic tube Servo motors
Starting the next Laser build, Plan to complete within 60 days.
Build Author DanY3D Views 660
Dirt cheap build.
Build Author Aaron Newsome Views 3959
Yet Another LEAD CNC Build
My take on the LEAD CNC build. Followed the instructions and I think it came together very nicely. Added a few of my own touches to finish up the build.
Build Author Knut Bøje Views 5340
My OX cnc upgrade.
Build Author Michael LaBombard Views 660
My Workbee build
Workbee, 1000mmX750mm , from China
Build Author obmilllivebuild Views 2871
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
Build Author Mark Carew Views 78535
V-Slot™ Linear Actuator Build (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author Mark Carew Views 10116
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author Srđan Marković Views 790
I am satisfied with my build and next one will be even better.
Build Author pek Views 31934
Prusa i3 Bear Upgrade V2
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
Build Author SecretSpy711 Views 7809
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author jdeglavina Views 2263
SMD Pick and place machine - Smoothieboard/OpenPnp
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Build Author Mark Carew Views 3544
Nema 23 Belt and Pinion System
This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!
Build Author Ariel Yahni Views 1312
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Build Author HuguesP Views 480
Peristaltic pumps, Automatic Cocktail mixer
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
Build Author Colin Mccourt Views 2117
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
Build Author John Pollman Views 1043
Wanhao Duplicator i3 Plus - Major rebuild.
Major rebuild of my Wanhao Duplicator i3 Plus.
Build Author superwoodle Views 1321
A table top OpenBuilds MiniMill build. 48V 52mm spindle with ER11 collets.
Build Author RoosterTX Views 1685
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Build Author Chazg Views 569
Indoor Drumline Props
Build Author Mark Carew Views 23660
OpenBuilds WorkBee 1510
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Build Author Cosmosteel Views 746
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author Leonard Cross Views 5449
Workbee CNC Router/Laser/Plotter
A CNC machine with a massive 30x30" work area, that supports a router, laser, plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
Build Author CharlieShimota Views 9194
Vox Solid State
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
Build Author Hidro669 Views 370
My custom world of tanks gaming desk built by Ragged Edge Eaming Solutions
summary huh... If it doesnt fit MAKE IT!
Build Author Mark Carew Views 1345
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author holographic Views 1438
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
Build Author Scott Martinez Views 3167
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Carl Feniak Views 227182
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author Lasersc Views 6067
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
Build Author Colin Hart Views 441
A Journey on the WorkBee Build...
Build Author Alex Chambers Views 3984
Workbee with Duet controller
Workbee 1010 with Duet controller from Ooznest
Build Author Metalguru Views 1975
WorkLead, no wait, LeadBee, naw... WoodWorker
Improvements on the Lead machine using some Workbee parts
Build Author tshilling Views 2359
K40 12x24in rebuild (In Original Case)
Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.
Build Author DakotaBusy Views 1173
OX (Large) CNC
Building a Large OX CNC Open Build on a fold down table.
Build Author Christian James Views 1534
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author Troy Proffitt Views 21522
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author msdosfx Views 1620
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Build Author Zach S Views 9247
Ballmasters 1605 1500x1000 ox cnc
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
Build Author Puddin Views 7609
100w Laser Cutter Build Log
I rebuild my 2 meter tall 3D printer into a 100w laser cutter
Build Author patnap71 Views 1425
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author Matthew Bates Views 1574
CNC Router Overhaul
This will be a complete overhaul of this router with some cool modifications.
Build Author pedrofernandez Views 2592
Co2 Laser Cutter/Engraver Rotary Attachment
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
Build Author wojak Views 1568
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach
Build Author TurfnSurf Views 1979
DIY C-Beam CNC
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Build Author Joelosborn Views 505
Project Infinity co2 laser
1m x 1.8m 60w co2 laser build.
Build Author David Bunch Views 5075
Sphinx 55 with 3D Printed Addons
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
Build Author Retsaj Views 3081
Large 3D Printer 5ft by 5ft print bed
New ultra large 3D Printer design. I'm calling it the AutoCrafter
Build Author Doug Rowley Views 1339
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Build Author Spark Concepts Views 1033
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author CoreCube3D Views 7203
CoreCube3D - A CoreXY 3D Printer
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
Build Author spout Views 1942
Big a** printer
Build Author Mark Carew Views 7753
OpenBuilds WorkBee 1050
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 21066
OpenBuilds WorkBee 1010
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 10208
OpenBuilds Sphinx 1050
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
Build Author Mark Carew Views 10206
OpenBuilds Sphinx 55
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
Build Author MattR Views 3829
Fixed Gantry CNC Router with Old Industrial Supplies
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
Build Author Mark Carew Views 4695
C-Beam XL Nema 23 Actuator
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
Build Author Jacob Lotter Views 4387
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.