Select a Category
Build Author KronBjorn Views 117
WorkBee Lead 1010, Reduced Footprint, Nema17
This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.
Build Author Metalguru Views 4128
Some Improvements on the Workbee 1000x1000
Improvements both real and suggested for the Workbee assembly
Build Author RV6APilot Views 649
South Carolina Workbee 1000X1000
This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.
Build Author Mark Carew Views 22136
OpenBuilds WorkBee 1510
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Build Author Stan Howe Views 361
Bee the Boss
The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.
Build Author Xxztrexxx Views 1225
Black out Edition Workbee 1010
Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..
Build Author pauna Views 1435
My giant "WORKBEE" 1750mm X 1750mm by ooznest
CNC MACHINE WORKBEE'S table making
Build Author Colin Mccourt Views 2019
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
Build Author Ryan Lock Views 42048
WorkBee CNC Machine
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
Build Author Mark Carew Views 19721
OpenBuilds WorkBee 1010
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
Build Author Jacob Lotter Views 4011
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author Michael LaBombard Views 586
My Workbee build
Workbee, 1000mmX750mm , from China
Build Author gonzachus Views 3706
1000 x 1000 Workbee powered by X controller
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
Build Author Alex Chambers Views 3718
Workbee with Duet controller
Workbee 1010 with Duet controller from Ooznest
Build Author Bikes and Beer Views 1271
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Build Author msdosfx Views 1454
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Build Author Leonard Cross Views 5049
Workbee CNC Router/Laser/Plotter
A CNC machine with a massive 30x30" work area, that supports a router, laser, plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
Build Author Colin Hart Views 409
A Journey on the WorkBee Build...
Build Author Metalguru Views 1890
WorkLead, no wait, LeadBee, naw... WoodWorker
Improvements on the Lead machine using some Workbee parts
Build Author Mark Carew Views 7387
OpenBuilds WorkBee 1050
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Build Author Christian James Views 1374
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author sharmstr Views 3712
Shawn's Workbee 1510
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
Build Author Doug Rowley Views 1244
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Build Author Glenn Weston Views 450
"Stung by the Bee" OB Workbee 1010 Build
This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.
Build Author T4Concepts Views 24230
WorkBee CNC build - My honest opinion, tips and help
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
Build Author Scadam Views 1035
WorkBee 1510 - First CNC Build
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
Build Author TimberTec1973 Views 1939
Wanted a nice project to work and learn on... now have a big CNC to play with A 1500x1000mm Workbee
Build Author Craig Hollabaugh Views 740
Hyatt and My Journey to Tonehenge
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Build Author arcrunner Views 2279
Workbee 1015 (50" wide by 30")
A Workbee able to cut 48"x24" material, built to continuously feed material so one can cut full sheets of ply.
Build Author micky ralte Views 1661
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
Build Author blterry1 Views 7281
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author joe williams Views 1117
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author fwm891 Views 4251
WorkBee 750x750 build
This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).
Build Author cilv1gazo Views 2081
Workbee 1500x1500 belt
Workbee CNC 1500x1500 with timing belt
Build Author cmitcham Views 853
a 1000x1000 acme screw workbee built as frugally as possible. thanks so much to ooznest and openbuilds :)
Build Author Hussein Dermay Views 2691
Ooznest WorkBee 1000mm x 1000mm Screw Driven
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
Build Author Vincent Walsarie Views 2838
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
A short summary of my Workbee CNC Build. I try to update it where I can
Build Author Axnfell Views 891
WorkBee 1000x2000 ACME Screw Version
Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...
Build Author Camvec Views 2748
WorkBee CNC full kit 1500mm x 1500mm
This will be my first build ever! Looking forward to it , just gotta finish the new workshop first then I'm on it!
Build Author Maxime Favre Views 2966
Brewery tank supports
Trying to design modular and evolutive supports for my brewery tanks.
Build Author inhan Views 3991
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.