Welcome to Our Community

Some features disabled for guests. Register Today.

My giant "WORKBEE" 1750mm X 1750mm by ooznest

Discussion in 'CNC Mills/Routers' started by pauna, May 12, 2019.

  1. pauna

    pauna New
    Builder

    Joined:
    May 18, 2016
    Messages:
    54
    Likes Received:
    13
  2. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,674
    Likes Received:
    1,318
    Looking forward to this @pauna !
    Alex.:)
     
  3. MCanabal

    MCanabal New
    Builder

    Joined:
    Dec 3, 2017
    Messages:
    1
    Likes Received:
    0
    excellent, I really want something like that for me !!!!
    You could share the files of the legs to cut in plasma.
     
  4. pauna

    pauna New
    Builder

    Joined:
    May 18, 2016
    Messages:
    54
    Likes Received:
    13

    of course
    By sending
    If you need another file, let me know
     

    Attached Files:

  5. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,741
    Likes Received:
    2,407
    @pauna Very well done WorkBee Build and controller box! Thank you for sharing
     
  6. pauna

    pauna New
    Builder

    Joined:
    May 18, 2016
    Messages:
    54
    Likes Received:
    13
  7. FoxFX

    FoxFX New
    Builder

    Joined:
    Oct 7, 2019
    Messages:
    1
    Likes Received:
    0
    WOW - that is seriously impressive work. Can I be cheeky and enquire how much the Workbee kit cost because you have made it bigger ?

    Awesome work =)
     
  8. Apeli

    Apeli New
    Builder

    Joined:
    Feb 15, 2018
    Messages:
    30
    Likes Received:
    12
    How sturdy is the X-axis (or Y, the one holding the router :) ), is it handling the loads well without bending/flexing?
     
  9. pauna

    pauna New
    Builder

    Joined:
    May 18, 2016
    Messages:
    54
    Likes Received:
    13
    Truly a problem. I managed to reinforce it with steel. But it is advisable to add another X-axis :(

     
    Apeli likes this.
  10. pauna

    pauna New
    Builder

    Joined:
    May 18, 2016
    Messages:
    54
    Likes Received:
    13
    If you remember correctly, 1500 GBP
     
  11. szalonewrzeciono

    Builder

    Joined:
    Nov 4, 2017
    Messages:
    14
    Likes Received:
    5
    hello @pauna! Really nice build, especially the table. I like it. Tell me where did you get c-beam profiles longer than 1500mm?
    Or maybe are they joined together? If joined could you show how? Regards!
     
  12. Rachel Holley

    Rachel Holley OpenBuilds Team
    Staff Member Builder

    Joined:
    Apr 18, 2018
    Messages:
    3
    Likes Received:
    2
    Hello @szalonewrzeciono . Can you please email customer service at http://support.openbuilds.com/support/home to receive information about rail lengths over 1500mm. At the moment, it's necessary that we process orders for longer Linear Rail through customer service rather than through our website, as we are still getting working on adding this option to the store.
     
  13. menezesmarcio07

    Builder

    Joined:
    Jul 15, 2020
    Messages:
    1
    Likes Received:
    0
    What are the measures of this table? Do you have a drawing with the measurements?
     
  14. pauna

    pauna New
    Builder

    Joined:
    May 18, 2016
    Messages:
    54
    Likes Received:
    13

    To put it bluntly, these graphs are no big deal. Never helped me to straighten the vertical and the horizontal ...
     
  15. PaulsM

    PaulsM New
    Builder

    Joined:
    Jul 17, 2020
    Messages:
    4
    Likes Received:
    0
    What did You use to get table straight? 90 degree magnets or clamps does not cover that :)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice