Build List
-
Active Filters:
in
7 Axis Camera Slider with Telescoping Vertical Lift
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A six axis camera slider with a 7th LIFT axis added!
![OpenBuilds C-beam 15mm belt on 1500mm C-Beam.](https://openbuilds.com/data/article_images/l/3/3457.jpg?t=1463622960)
Build Author
Dave420
Views
13109
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
![The Beast](https://openbuilds.com/data/article_images/l/9/9775.jpg?t=1612242250)
Build Author
M1dn1ghtN1nj4
Views
8064
The Beast
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
![YAOP (Yet Another Openbuilds Printer)](https://openbuilds.com/data/article_images/l/1/1493.jpg?t=1418414947)
Build Author
winand
Views
15613
YAOP (Yet Another Openbuilds Printer)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Yet Another Openbuilds Printer, my version :-P
Mini lathe CNC Conversion - Work in progress
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1389472486)
My on going build of CNC Mini Lathe
![Linear Rail CNC Machines](https://openbuilds.com/data/article_images/l/1/1771.jpg?t=1428529929)
Build Author
sgspenceley
Views
184375
Linear Rail CNC Machines
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC build using linear rails & lead screws.
![USB Hot Wire CNC Foam Cutter](https://openbuilds.com/data/article_images/l/8/8770.jpg?t=1566283532)
Build Author
rcKeith
Views
6141
USB Hot Wire CNC Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
![ME - Core XY 3d printer](https://openbuilds.com/data/article_images/l/10/10228.jpg?t=1645120787)
Build Author
Edgar Mata
Views
20197
ME - Core XY 3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted to make my own Voron, so I made my own Voron,
![LS-LASER](https://openbuilds.com/data/article_images/l/7/7304.jpg?t=1532805578)
Build Author
LukasK
Views
21558
LS-LASER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
![V-Slot® NEMA 17 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/0/80.jpg?t=1444071466)
Build Author
Mark Carew
Views
120045
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
![C-Beam Lead Screw CNC Mountain](https://openbuilds.com/data/article_images/l/3/3947.jpg?t=1478950296)
Build Author
Savvas
Views
18163
C-Beam Lead Screw CNC Mountain
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
![Openbuilds Table Top 50w Co2 Laser Cutter/Engraver](https://openbuilds.com/data/article_images/l/8/8688.jpg?t=1562369052)
Build Author
pedrofernandez
Views
34322
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
![](https://openbuilds.com/data/article_images/l/6/6636.jpg?t=1519564949)
Build Author
Glenn Weston
Views
9383
"AcroCadabra" My Acro Laser built with my C-Beam XL
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.
MiniMill Z Axis Upgrade with Offset Motor
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgrade your Minimill with an off-set Z Axis Motor
![OpenBuilds Lead 1515](https://openbuilds.com/data/article_images/l/10/10293.jpg?t=1650393599)
Build Author
Shaun Weitzel
Views
4832
OpenBuilds Lead 1515
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of a Lead 1515!
![Upgrading Your 3D Printer With Synchronous Leveling](https://openbuilds.com/data/article_images/l/9/9159.jpg?t=1580588676)
Build Author
Keith Davis
Views
8466
Upgrading Your 3D Printer With Synchronous Leveling
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Upgrading printers for Synchronous Leveling
cera.tops Clay 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3d printer framework was designed for use with the ceraStruder clay 3D printing extruder. More info coming soon.
Another C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is basically a Sphinx variant with few changes of my own...hope it'll work.
![FARM OX (Four Axis Rotary Machine)](https://openbuilds.com/data/article_images/l/2/2415.jpg?t=1438353710)
Build Author
ymilord
Views
55132
FARM OX (Four Axis Rotary Machine)
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40447
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
![40x40 V-Slot Rod Type Linear Actuator](https://openbuilds.com/data/article_images/l/9/9196.jpg?t=1581687266)
Build Author
Martin.Barfoed
Views
5116
40x40 V-Slot Rod Type Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Rod-type Linear Actuator based on the 40x40 V-slot profile
![SolidCore CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/9/9334.jpg?t=1588996964)
Build Author
shanehooper
Views
12555
SolidCore CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular and Scalable CoreXY Printer with all metal parts.
Adjustable Router Guide Template
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
Gärschrank
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A cabinet to keep a constant temperature for pizza or bread mother dough to grow.
18x36x16 Inch 3D Printer - Work in progress
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Tough 3D Printer using OpenBuilds Parts!
Stabilus 3d Large Format Printer Kit
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stabilus 3d Large Format Printer Kit
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32316
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
![bor 454-D](https://openbuilds.com/data/article_images/l/9/9915.jpg?t=1619635519)
Build Author
Mike Campbell
Views
9240
bor 454-D
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A large format, modular, rack and pinion build designed around OpenBuilds components.
![Router Sled V1.1 V-SLOT](https://openbuilds.com/data/article_images/l/9/9608.jpg?t=1603723779)
Build Author
Damian V-SLOT Poland
Views
11290
Router Sled V1.1 V-SLOT
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)
My C-Beam build and modifications
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.
Prototype Rack-n-Pinion 4'x8'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a custom gear rack drive machine with a 4'x8' cut capacity.
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29627
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
![OpenBuilds MiniMill](https://openbuilds.com/data/article_images/l/5/5087.jpg?t=1543859341)
Build Author
Mark Carew
Views
141519
OpenBuilds MiniMill
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
![OpenPull From CNC Kitchen.. attempt](https://openbuilds.com/data/article_images/l/10/10239.jpg?t=1645386160)
Build Author
Gary Caruso
Views
1817
OpenPull From CNC Kitchen.. attempt
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
ME - Cloner 3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...
OB Lead 1515 CNC Router 2021
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.
PnP 4 axis small/fast machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
![Rigid Compact Desktop C-BEAM](https://openbuilds.com/data/article_images/l/9/9887.jpg?t=1617382213)
Build Author
nickchnv
Views
10187
Rigid Compact Desktop C-BEAM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
Black gear 1500X3000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My cnc update and rebuild.
GIGAWATT 2.1 LASER CUTTER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40
![Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019](https://openbuilds.com/data/article_images/l/8/8288.jpg?t=1553609218)
Build Author
obmilllivebuild
Views
10474
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
The Beast
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1000mm linear rails, double gantry, build in Process... more to come
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
77105
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
ME-Mini 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Prusa mini inspired 3d printer
![Stinger Laser](https://openbuilds.com/data/article_images/l/4/4877.jpg?t=1491777619)
Build Author
Kyo
Views
14193
Stinger Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
3-Axis CNC Laser Engraver running grbl 1.1 in laser mode and Laserweb4.
![Cartesian Style Build UK](https://openbuilds.com/data/article_images/l/10/10100.jpg?t=1636385413)
Build Author
Steve Hall
Views
3115
Cartesian Style Build UK
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another Cartesian style build with parts from the UK, US & China.
![Modular Desktop Vacuum Former](https://openbuilds.com/data/article_images/l/10/10098.jpg?t=1636207085)
Build Author
lekey
Views
6782
Modular Desktop Vacuum Former
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.
Viking OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My OX cnc upgrade.
![ProLight 1000 Mill Retrofit](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Johnny Reich
Views
1082
ProLight 1000 Mill Retrofit
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.
![WorkBee 1010](https://openbuilds.com/data/article_images/l/9/9237.jpg?t=1583420438)
Build Author
txcomp
Views
5734
WorkBee 1010 "Get Rid of the Slop" Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
![Interface magnetic mount](https://openbuilds.com/data/article_images/l/9/9686.jpg?t=1608053457)
Build Author
OpenBuilds
Views
3444
Interface magnetic mount
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
Fastmill CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Very cheap CNC made from laser fired and bent parts.
![Workhorse 3D Printer](https://openbuilds.com/data/article_images/l/8/8576.jpg?t=1633485374)
Build Author
shanehooper
Views
25578
Workhorse 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source
A very affordable CNC routing
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen
![OX CNC SMW3d 1500x1500](https://openbuilds.com/data/article_images/l/5/5681.jpg?t=1507032796)
Build Author
Jeremiah Guinn
Views
5016
OX CNC SMW3d 1500x1500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A small business idea led us here, lets see where it will go.
![OpenBuilds Sphinx 55 (20](https://openbuilds.com/data/article_images/l/7/7197.jpg?t=1529019228)
Build Author
Mark Carew
Views
47666
OpenBuilds Sphinx 55 (20" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
![Reviving the Origonal PhlatPrinter with BlackBox](https://openbuilds.com/data/article_images/l/9/9928.jpg?t=1621196022)
Build Author
theracermark
Views
2932
Reviving the Origonal PhlatPrinter with BlackBox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
![Voxel OX - Extendable 3D Printer and CNC Platform](https://openbuilds.com/data/article_images/l/5/5080.jpg?t=1489276945)
Build Author
Marshall Peck
Views
79110
Voxel OX - Extendable 3D Printer and CNC Platform
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An open source 3D printer design with a sturdy V-Slot frame
HD CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy Duty build with 1605 Ballscrew and Linear Rail
![Modified Sphinx 55 with MGN12 linear rails](https://openbuilds.com/data/article_images/l/9/9456.jpg?t=1596345440)
Build Author
Wes Dwight
Views
6070
Modified Sphinx 55 with MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
![Lead CNC 1010 Platform and Rotating Laptop Mount](https://openbuilds.com/data/article_images/l/9/9908.jpg?t=1619133278)
Build Author
ckgottabuild
Views
2715
Lead CNC 1010 Platform and Rotating Laptop Mount
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
![Oven Dog](https://openbuilds.com/data/article_images/l/9/9877.jpg?t=1616811814)
Build Author
Genetoys
Views
2379
Oven Dog
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a printer that can fit inside and operate at ~200 C oven temperatures
![Racoon CNC](https://openbuilds.com/data/article_images/l/9/9623.jpg?t=1605312916)
Build Author
Stokrotka74
Views
5734
Racoon CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
Laser engraving machine
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Second better project, high durable mainframe, silent work, non vibration.
3000x1500 CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.
![C-Beam® XLarge Linear Actuator](https://openbuilds.com/data/article_images/l/7/7424.jpg?t=1532975801)
Build Author
Mark Carew
Views
19697
C-Beam® XLarge Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
Sim Racing rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds
![crypt-cube](https://openbuilds.com/data/article_images/l/8/8354.jpg?t=1613674363)
Build Author
crypt-tek
Views
8906
crypt-cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8584
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
![Ball Screw Carrier.](https://openbuilds.com/data/article_images/l/9/9656.jpg?t=1606782124)
Build Author
Corey Corbin
Views
5063
Ball Screw Carrier.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Create a ball screw carrier with out BF BK bearing blocks.
Improved CBM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.
![NEMA 17 Belt and Pinion Actuator](https://openbuilds.com/data/article_images/l/7/7499.jpg?t=1534876365)
Build Author
Mark Carew
Views
12635
NEMA 17 Belt and Pinion Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This Belt and Pinion actuator is a great example of how easy it is to convert your machine into a belt drive system.
The dwarf
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a build for those of us that want to work fairly large but are in a tight space and budget
Keeping thing quiet with a custom C Beam XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small form factor machine in a soundproof enclosure
The BEE and ME
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
![Prusa Dragon LR](https://openbuilds.com/data/article_images/l/9/9496.jpg?t=1598488794)
Build Author
Sergio Di Ventura
Views
7711
Prusa Dragon LR
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Below are the details of my build and a good story for those who read till the end. Sorry for the grammar
Retractable WorkBee1510 with Marlin+MarlinPanel high level build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
WorkBee1510 with retractable space saving stand and customize build Marlin firmware and MarlinPanel (GCode Sender/UI)
![C-Beam Sphinx](https://openbuilds.com/data/article_images/l/7/7952.jpg?t=1543675427)
Build Author
Vin1027
Views
6136
C-Beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
![Rack and Pinion Cartesian Mill](https://openbuilds.com/data/article_images/l/9/9020.jpg?t=1576955758)
Build Author
Joe F
Views
6973
Rack and Pinion Cartesian Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Ox with Gecko Controller and CNC Linux
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22177
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
CNC China Router Conversion to Open Builds System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
![Router / plasma cutting table ( Rack and pinion )](https://openbuilds.com/data/article_images/l/8/8838.jpg?t=1572632620)
Build Author
mytechno3d
Views
24337
Router / plasma cutting table ( Rack and pinion )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy DIY plasma cutting table
My build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am satisfied with my build and next one will be even better.
![Lead CNC 1510 modified](https://openbuilds.com/data/article_images/l/8/8843.jpg?t=1572455082)
Build Author
Marco964
Views
7844
Lead CNC 1510 modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
Voxel Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.
3D Printer 051
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Functional real-world 3D printer build with RM2-2RS bearings in routed V grooves on phenolic resin rails (lab countertop scraps) and NSK 25mm linear rails/trucks.
OpenBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.
![Nema 23 Belt and Pinion Actuator](https://openbuilds.com/data/article_images/l/7/7510.jpg?t=1536083314)
Build Author
Mark Carew
Views
14509
Nema 23 Belt and Pinion Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!
![Mining Rig](https://openbuilds.com/data/article_images/l/7/7201.jpg?t=1529396612)
Build Author
mytechno3d
Views
4256
Mining Rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Crypto Mining rigs with vslot rail
Textile Drawing Machine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Textile Drawing Machine is a drawing machine thought specifically to draw on textile. Unlike other CNC machine it's dimensions follow the standard textile dimensions (1500mm) and it's on wheels to allow to draw on an unlimited area. TDM has been developed for the project Digital Wax Print, a self initiated research project, carried out by The Future Continuous, a collabration between Olivia De Gouveia and Eugenia Morpurgo.
![CNC Sand and Spraycalk drawmaschine](https://openbuilds.com/data/article_images/l/4/4792.jpg?t=1492879931)
Build Author
kallibaba
Views
31844
CNC Sand and Spraycalk drawmaschine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
Mini Additive Manufacturing Printer by Chris Scholl
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mini Additive Manufacturing Printer by Chris Scholl
![Sphinx Derived Router](https://openbuilds.com/data/article_images/l/9/9234.jpg?t=1583687307)
Build Author
Corey Corbin
Views
3844
Sphinx Derived Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.
![PeeNaPle_V1.4b](https://openbuilds.com/data/article_images/l/9/9470.jpg?t=1597368590)
Build Author
Crazzy French Dude
Views
3813
PeeNaPle_V1.4b
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
![Sphinx rigid XL](https://openbuilds.com/data/article_images/l/4/4903.jpg?t=1492143643)
Build Author
Apothus
Views
20975
Sphinx rigid XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Rigid variant of the C-Beam sphinx platform
![Mustardo - The Mustard Bot](https://openbuilds.com/data/article_images/l/9/9361.jpg?t=1595382429)
Build Author
Quinnthouzand
Views
2736
Mustardo - The Mustard Bot
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
![V-King CoreXY](https://openbuilds.com/data/article_images/l/7/7699.jpg?t=1539181070)
Build Author
Roy Berntsen
Views
23623
V-King CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
![Was once a mini mill](https://openbuilds.com/data/article_images/l/7/7328.jpg?t=1531492528)
Build Author
dreys
Views
10232
Was once a mini mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Working progress.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)