OX Based CNC

This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.

One Linear Actuator covering two dimensions, WHAT!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine

Vacuum Former built with off-the-shelf parts, works perfectly every time!

Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.

Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!

The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.

I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...

Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.

This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.

This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.

A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter

Maximus Evolution : 380mm x 400mm XL 3D Printer

Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool

A scratch built steel frame CNC Router.

For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.

I'm building a machine specifically for doing 4th axis work on woodwind instruments.

My version of the Mug Plotter designed by Teed http://edinburghhacklab.com/ . Also used the Eibotboard from the original eggbot from evilmadscientists http://shop.evilmadscientist.com/partsmenu/188-ebb A huge thanks to Hexitex for his brilliant Four jaw chuck http://www.thingiverse.com/thing:5791

Large 600mm x 350mm x 350mm Build Volume with lead screw driven motion. The printer build has a moving gantry and fixed heat bed. Open Source

Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.

CoreXY printer

The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.

Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you

A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.

Hello, I have been looking around for a vacuum forming machine for a long time, and could not find one that was either in my price range or was safe enough for me to want in my home. The Phlatformer answers both of these requirements... Unfortunately, it was not available in either cut-out or...

In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.

While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)

The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine

Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer

A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40

Easy to build series of enclosures for all your CNC needs!

My build log of an adapted Sphinx design with additional height and a larger X and Y axis.

Heavy DIY plasma cutting table

Large Core XY 3d Printer W/fixed build plate

Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews

1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.

SLA LCD 3D Printer ( 8.9'' LCD screen )

A low cost and easy to build laser cutter based on 2.8w laser diode .

V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source

I have wanted a 3D printer for a while. I had thought to convert my ShapeOko machine to a 3D printer BUT after looking at having to replace the electronics with new and the small form factor. I went looking for a kit which would do what I want. Well I found it. It is the MakerFarm i3v printer.

My attempt at a 3D scanner. Still trying to convince myself it will work.

OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z

A stable and strong 3D printer made of 16mm MDF and machined on my OX.

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

OKMI 3d Printer based on CoreXY

A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!

Super cool standalone Human-Machine Interface for controlling your CNC machines!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.

An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.

Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.

Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.

Homemade plasma cnc

The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.

An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter

C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

Larger format FDM printer using C-Beam linear stages

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0

I am building a Laser cutter based off Robert Hummel's Laser V design.

I creat a open source 3D Printer to print big things. Print size: 400x500x300 mm. You can download the Drawing in PDF and in Inventor 2013 format. The unwinding drawings are also included. I take some detail photos for a better understanding.

A compact portable DIY camera slider for time lapse photography using a GoPro.

Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.

Rigid variant of the C-Beam sphinx platform

1000mm x 750mm OX with some planned enhancements. My first venture into CNC.

Delta printer designed in sketchup and includes an adjustable bed.

Rotary attachment to engrave cylindrical objects on laser machines

Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.

A no-nonsense CNC mini mill to get the job done.

LASER ENGRAVING DIY 60 WATT

A 3D Scanning Station

Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR

Document my OX build process. I will also be sharing SolidWorks parts files & assemblies.

High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.

Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.

This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

While mimicing the frame platform of the popular Crealiy CR-10 and Ender series, the Vulcan MAX overcomes design weaknesses in both printers. Chief improvements are a more stable, rigid mounting of the Z frame and Z gantry.

Mechanically, a scaled up OX build (1500x1500). Electronically, GRBL on an Arduino and a gShield. From a software perspective, the focus is on useable open source software tool chains.

The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.

This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community

This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.

I wanted to make my own Voron, so I made my own Voron,

Optical home and limit switches for cnc, 3D printers, laser cutters, etc.

This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.

Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.

My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.

The OpenBuilds Table Series offers a modular table structure that grows with your needs.

Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.

This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker

A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance

I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular

A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.

A simple fixed dust shoe for your OX.