Build List
-
Active Filters:
d
Build Author Kyo Views 21951
Sphinx 55
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
DRO
Belt drive linear scale for Mill and Lathe
Build Author M1dn1ghtN1nj4 Views 7838
The Beast
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
Build Author 2SIsurf Views 4235
Hotwire cnc Surfboards
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
LEAD 1515, HGH15, SFU1604 Ball Screw
Project Completed.
Build Author Sergei Starovoitov Views 3139
Motorized mic stand
This system allows you to adjust the position of the microphone remotely
Build Author Frank Gore Views 7030
Kossel Extreme
A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.
Keeping thing quiet with a custom C Beam XL
A small form factor machine in a soundproof enclosure
Rotary axis for Workbee
Adding a rotary axis to the Workbee 1010. Including height modifications to the Workbee.
Build Author OpenBuilds Views 22295
INTERFACE CNC Touch Control System
Super cool standalone Human-Machine Interface for controlling your CNC machines!
750x750 Plasma cutter table
It startet in May with some leftovers from a cnc router build. Now in the middle of December its 99% finish. Everything is lowcost, spend about 1600$ so far.
Build Author OpenBuilds Views 18188
OpenBuilds Table Series
The OpenBuilds Table Series offers a modular table structure that grows with your needs.
Build Author Stokrotka74 Views 5538
Racoon CNC
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
V-rex , Low cost CoreXY
Easy to build,low-cost, CoreXY
CoreXY Cubish
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
ACME OX (A Lead Screw Driven Ox Derivative (850x1500))
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Jose Alezandre Views 1253
Mighty Chihuahua
The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360
Build Author Damian V-SLOT Poland Views 11062
Router Sled V1.1 V-SLOT
We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)
Build Author OpenBuilds Views 12219
C-Beam® Tension XL Linear Actuator
Bringing your lead screw precision and accuracy to new lengths using a simplistic tension system!
3D Printer 051
Functional real-world 3D printer build with RM2-2RS bearings in routed V grooves on phenolic resin rails (lab countertop scraps) and NSK 25mm linear rails/trucks.
Build Author mytechno3d Views 14525
Cut To Length Machine
A Cut To Length machine controlled by computer
Mini Additive Manufacturing Printer by Chris Scholl
Mini Additive Manufacturing Printer by Chris Scholl
Build Author Troy Joachim Views 13450
Sigron IDEX
BNC3D Signax + Voron = Sigron IDEX
Build Author Sergio Di Ventura Views 7544
Prusa Dragon LR
Below are the details of my build and a good story for those who read till the end. Sorry for the grammar
Stabilus 3d Large Format Printer Kit
Stabilus 3d Large Format Printer Kit
Build Author Robert Mech Views 7559
LayerFused X301 - CoreXY Large Volume Printer
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
CNC China Router Conversion to Open Builds System
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
Build Author Rob Taylor Views 15517
M4: 1510SS Heavy Mk.I
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
Build Author Crazzy French Dude Views 3568
PeeNaPle_V1.4b
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
My build
I am satisfied with my build and next one will be even better.
Build Author Srđan Marković Views 3130
Second machine
Machine with 12,5Nm closed loop steppers or servo steppers
Build Author Wes Dwight Views 5851
Modified Sphinx 55 with MGN12 linear rails
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
Workbee with Duet controller
Workbee 1010 with Duet controller from Ooznest
Build Author Mark Carew Views 205681
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author Quinnthouzand Views 2628
Mustardo - The Mustard Bot
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
Build Author StrictlyScale Views 6428
Lead1010 Build with Enclosure
First time CNC builder puts together a Lead1010 machine.
Build Author rcKeith Views 5895
USB Hot Wire CNC Foam Cutter
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
Build Author Damian V-SLOT Poland Views 13889
DIY Slab Flattening Mill
V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.
Build Author Corey Corbin Views 3747
Sphinx Derived Router
I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.
Build Author Troy Joachim Views 15106
Prusa i3 Bear IDEX
Remix of the Prusa i3 Bear with added IDEX
Tall OX
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
Build Author ajdubs Views 3406
A custom arcade
This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.
Build Author Leboeuf Views 3609
Cartesian 3d printer
This is the build of a cartesian 3d printer made of an old Anet and Geeeteck, some 2020 alu profil and linear rail. Powered by a Rumba with a Nextion screen. It should be modular and accept dual Extrusion and laser engraving.
Bored in the garage enclosure build
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
Learning how to build
I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.
Dual Direct Drive Extruder
a dual extruder build using direct drive for flexible filaments
SCoreXY
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0
A very affordable CNC routing
In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen
ApiNui - CNC Router ( an oversized workbee )
Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components
Cnc Router 3000 x 1000 mm
In progress
Vulcan Pro V1
A posi-drive leveling printer in 300x300x380mm format that easily breaks down for suitcase size shipping.
Workbee Z-axis Upgrade
Z-Axis upgrade with linear rails, SFU1204 Ball Screw and full aluminium construction.
Build Author OpenBuilds Views 5331
V-Slot Ventilator
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
MIT E-Vent | MIT Emergency Ventilator
Ventilator prototype based of OpenBuilds Stock parts
Build Author Tristen Poliseno Views 1993
Back and forth rail mechanism
I have the whole description and all the details in the "Body" section!
Build Author Project Hopeless Views 12819
Plywood Built CNC Router
This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.
WorkBee Saving Lives
Using the WorkBee to protect doctors against Corona virus.
Build Author Joe F Views 6812
Rack and Pinion Cartesian Mill
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Build Author Neil Rosenberg Views 35011
Dash-X 3D Printer: Innovative design
Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.
Build Author SandeepsCNC Views 10472
Raspberry Pi CNC Software
The main objective is to build a software which can completely run on a single board computer, Rasbperry Pi, to reduce the complete cost of building a cnc machine. The software is extensively tested and can be run on any raspberry pi 2/3 boards. With no G-Code dependency, you can do complex 3D relief carving to simple tasks with simple GUI based project development environment. Please go through the YouTube channel for more details https://youtu.be/8KOXqLpvscg
Model train lift - scale HO
This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.
Build Author Daniel Stewart Views 1108
Ultra sun cutter
A sun cutter only using mirror and glass balls with x and y table movement
Build Author txcomp Views 5567
WorkBee 1010 "Get Rid of the Slop" Build
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
Build Author Kenneth Witthuhn Views 7257
Openbuilds CNC (witthuhnCNC XKLBR-1S)
Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.
cera.tops Clay 3d Printer
This 3d printer framework was designed for use with the ceraStruder clay 3D printing extruder. More info coming soon.
Build Author Forestbird Originals Views 3692
Lead 1010 Build - Anything but stock.
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
Build Author Martin.Barfoed Views 4888
40x40 V-Slot Rod Type Linear Actuator
A Rod-type Linear Actuator based on the 40x40 V-slot profile
LEAD CNC 1010 Laser Modification
Easy All-in-One Laser and Mounting Kit for your Openbuilds CNC.
18x36x16 Inch 3D Printer - Work in progress
Tough 3D Printer using OpenBuilds Parts!
Build Author Mark Carew Views 101972
V-Slot® NEMA 17 Linear Actuator Bundle (Lead Screw)
Example model of lead screw driven actuators for your next project!
Build Author Mark Carew Views 6481
OpenBuilds PowerCase
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
C-Beam Dust Shoe
A short description of the dust shoe I made for my machine.
Build Author Keith Davis Views 8264
Upgrading Your 3D Printer With Synchronous Leveling
Upgrading printers for Synchronous Leveling
Lead 1010 First time build
First time build of the Lead 1010 CNC with the High Z add on.
Build Author Keith Davis Views 17736
BldrBot S2
A Prusa i3 design running on Open Build's mini V wheels
Ox cnc improvements chain driven
Just ox cnc experiment
Core XY Beast
Super solid core xy build inspired by the e3d tool changer
My Ooznest Workbee V2.0 build
I'm new to this whole process, so this is a build by a newbie for newbies.
Plasma CNC machine
The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.
Angle grinder converted into electric drill
How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.
1250x1000 Build
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
Build Author DaleShaw Views 3360
Senior Project CNC table
So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..
Build Author David Florian Views 8232
Dual Extruders 3D Printer - Zidex Upgraded
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Build Author mytechno3d Views 23930
Router / plasma cutting table ( Rack and pinion )
Heavy DIY plasma cutting table
Build Author Sonny Lowe Views 5156
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
Build Author Kims3DIY Views 16628
Beamlazer Laser cutter CO2 100W
Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.
Build Author Darren Dickson Views 3009
3D printed CNC Machine
So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.
Build Author Neil Scott Views 1860
Barcelona Build
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
Build Author Mark Carew Views 139723
OpenBuilds MiniMill
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author Mark Carew Views 46940
OpenBuilds Sphinx 55 (20" x 20")
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
Build Author Mark Carew Views 28723
OpenBuilds Sphinx 1050 (20" x 40")
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
Build Author crypt-tek Views 32051
C3DO
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Build Author Bruce Walker Views 5731
BD's Burn Box - ACRO Laser Engraver System
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
Build Author Vunnie Views 5653
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
LayerFused C201 - DIY 3D Printer Build, i3 Style
My DIY 3D Printer build which is similar to an i3 style printer. This is a fully documented step-by-step build with videos.
Build Author Fábio Pires Views 5924
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
Laser Rotary Tool / Attachment
Rotary attachment to engrave cylindrical objects on laser machines
Fully 3D Printed Small CNC Router/Plotter
3D Printed CNC machine. The build is on Thingiverse. https://www.thingiverse.com/thing:3842401 I posted it here to give props to the Openbuilds Control Software!
Build Author Marco964 Views 7690
Lead CNC 1510 modified
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
Gary's Mod Plates for OX Heavy Duty X and Z
Gary's take on the OX HD X and Z plates, making it stiffer, adding mini wheels to the C-beam and Quick removable Z axis.