Welcome to Our Community

Some features disabled for guests. Register Today.

      1. Build Progress:
        • Build in Progress...
      Rate This Build
      0 votes
      This is what I'm envisioning.. just have to see what I actually end up with.
      My_CNC rev8.jpg

      Controls tested and running.


      Support table, torsion box table.


      Gantry also a torsion box.



      First assembly of the gantry. Table is ~60 thou (1.5mm) off left to right across 4 feet. I'm thinking just let the spoil board correct for that.


      Test fit and powered Z Axis

      Z Axis Homing Test Run.jpg

      Z axis I put the profile bearings on the travel plate so when extended it is as rigid as possible.

      Z Axis Travel Plate.jpg

      Gantry final assembly and aligning.

      Gantry Setup Rails and BallScrew.jpg

      Attached Files:

  • Loading...
  • Build Details

    Build License:
    • CC - Creative Commons Public Domain (CCO 1+)

    Reason for this Build

    Wife gave me a project... just so happened to need a CNC router :)

    Inspired by

    Scott Martinez The Growler and the $900 CNC
  • Attached Files:

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice