Build List
-
Active Filters:
o
ricks workbee build
i had the ox build and wanted to do a more beeffer style so i went with a workbee style machine ..
Taller couch legs
A simple but elegent couch legs
My giant "WORKBEE" 1750mm X 1750mm by ooznest
CNC MACHINE WORKBEE'S table making
Build Author viktop Views 20864
Simple Cnc System (arduino Grbl)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
Build Author MarkM_NJ Views 18516
Spartacus Inspire
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Build Author Cortellini Views 4494
the Feedback Fractal project
The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.
Open source large format CNC-machine and 3D printer
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
Mushu - Large Scale CoreXY
20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.
Hevavy duty 1300mm x 1300mm laser cutter Ceramic tube Servo motors
Starting the next Laser build, Plan to complete within 60 days.
GhettoPrinter
Dirt cheap build.
Viking OX
My OX cnc upgrade.
My Workbee build
Workbee, 1000mmX750mm , from China
Build Author pek Views 76945
Prusa i3 Bear Upgrade V2
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
SMD Pick and place machine - Smoothieboard/OpenPnp
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Build Author Ariel Yahni Views 5177
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Build Author HuguesP Views 5507
Peristaltic pumps, Automatic Cocktail mixer
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
Build Author John Pollman Views 5886
Wanhao Duplicator i3 Plus - Major rebuild.
Major rebuild of my Wanhao Duplicator i3 Plus.
MiniMill build
A table top OpenBuilds MiniMill build. 48V 52mm spindle with ER11 collets.
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Indoor Drumline Props
Triangular Towers
Build Author Cosmosteel Views 3550
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author CharlieShimota Views 14228
Vox Solid State
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
Build Author Hidro669 Views 2552
My custom world of tanks gaming desk built by Ragged Edge Eaming Solutions
summary huh... If it doesnt fit MAKE IT!
Build Author Mark Carew Views 4981
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author holographic Views 6409
Laser DIY
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
Build Author Scott Martinez Views 10018
The Growler
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Carl Feniak Views 277711
C-Bot
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author Lasersc Views 9336
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
OoozNest WorkBee
A Journey on the WorkBee Build...
WorkLead, no wait, LeadBee, naw... WoodWorker
Improvements on the Lead machine using some Workbee parts
OX (Large) CNC
Building a Large OX CNC Open Build on a fold down table.
Build Author Christian James Views 7215
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author msdosfx Views 5007
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Ballmasters 1605 1500x1000 ox cnc
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
Build Author patnap71 Views 5360
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author pedrofernandez Views 15906
Co2 Laser Cutter/Engraver Rotary Attachment
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach
Build Author TurfnSurf Views 5691
DIY C-Beam CNC
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Project Infinity co2 laser
1m x 1.8m 60w co2 laser build.
Sphinx 55 with 3D Printed Addons
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
Large 3D Printer 5ft by 5ft print bed
New ultra large 3D Printer design. I'm calling it the AutoCrafter
Build Author Doug Rowley Views 3342
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Build Author Spark Concepts Views 4280
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author CoreCube3D Views 18509
CoreCube3D - A CoreXY 3D Printer
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
Build Author Jacob Lotter Views 21889
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author Jacob Lotter Views 4025
CNC ESS Controls System
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Shawn's Workbee 1510
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
Build Author thinman Views 7178
Delta250
A 250x250 mm Delta Printer utilizing a Duet Wifi controller and a Titan Aero direct drive extruder.
Build Author Jay Almers Views 6233
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Build Author pedrofernandez Views 8559
K40 Cube Laser Cutter
The k40 cube is a laser cutter build using mostly stock parts of the chinese k40 laser
Build Author joetemus Views 5212
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Savvas Views 16424
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
RRP - Roller Rack Pinion System
Current progress uses existing openbuilds bearings, but also uses 8mm shafts (custom)
Router for speargun hobby
First router build for speargun fabrication
Shapeoko 2 - my first CNC
This was my first foray into CNC. I chose to go with a reliable kit build since my knowledge of GCode, controllers, and steppers was pretty rudimentary.
Brokkr CNC 2.0
1M C-beam xy variant
Build Author Connor Mckeown Views 5260
My Prusa Build
The process from my bought printer, to a custom home built machine
Build Author Rob Taylor Views 15632
Portable Diode Laser Cutter
Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.
Sphinx 7575
Sphinx CNC modified to 750mm x 750mm c-beams. Parts not readily available in South Africa, so i have to make some modifications...
Build Author David Hartkop Views 2074
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Michael.M Views 60425
GRANITE 1.0
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Gluing frame for guitar tops and backs
I have built four of these frames. The first pictured I have been using for maybe a year or two and bought the clamps. The last three I have made I have built my own clamps with openbuild parts. I am still working on the design. At present I use wedges to apply pressure to the side of the wood and block. I am working on a cam system to apply pressure. I just bought 8mm screws with Knobs for quicker adjustment. I will update the build when I make these improvements.
Build Author Spark Concepts Views 13158
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author pedrofernandez Views 13406
The Franken Forty
This is a K40 machine conversion!!
Mostly Printed Cartesian CNC
This is a build that is just getting started. Not all of the parts are ordered or printed as of 5/27/2018. Hopefully in the next few weeks all parts will be printed and most parts ordered.
Build Author Roy Berntsen Views 23352
V-King CoreXY
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
Build Author Joe Young Views 10894
Rack and Pinion (Death to Belts)
Low profile rack and pinion linear actuator design
Build Author Joe Young Views 4341
Goliath - CNC + 3D printer Hybrid
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
Portable Sphinx 1050
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
Build Author Kyo Views 29978
Sphinx 1050
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
Sphinx 1050
Openbuilds 1050 Sphinx. Thank you to Mark Carew for trading me a set of plates for a spindle and PSU I was not using. Mark is a champ!
Build Author Bikes and Beer Views 3700
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Rigidbot Big with glass bed
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
Phil's Workbee
Wanted a nice project to work and learn on... now have a big CNC to play with A 1500x1000mm Workbee
Build Author Craig Hollabaugh Views 3443
Hyatt and My Journey to Tonehenge
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Build Author Vin1027 Views 6013
C-Beam Sphinx
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
Build Author Vegard Humlen Views 3667
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
My new wood mill
First and foremost, I want to create accurate parts for my model aircraft. In second line I am interested in the control and electronics of the milling machine. If you are interested in drawings and the parts list, feel free to contact me.
Small Slot Cutter
A build to cut .008 inch slots into JB Weld.
Black out Edition Workbee 1010
Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..
Build Author rob4cnc Views 3003
Rock n Roll
The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.
Open Builds C-Beam K-cup holder
Making use of c-beam I have had left over from projects.
Another OX CNC Router
An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.
Build Author James Evanko Views 2893
Sherline C-Beam with Offline Controller and MPG
This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.
LaserShark300
300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.
Build Author James Evanko Views 2927
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author RobFromLDMS Views 3915
Lithgow Mens Shed CNC build
The tale of how we put together our CNC Router, and some of the difficulties encountered. It is now ready for final testing and commissioning.
WorkBee 1510 - First CNC Build
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
Build Author MattR Views 16536
Cricut Expressions 2 to ESP32 GRBL Control
A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
Build Author deltajegga Views 8213
THE delta
probably as big as you'd want it...
Build Author MrMojoRisin Views 6284
IIOT WiFi Portable CNC Plasma Cutter
IIOT WiFi Plasma CNC.
Kraken Core-XY Printer
Core-XY build witha quad nozzle
Starting my build 2.8mx1.4m
Starting my cnc router, laser and plasma using aluminium 80x80
The Spice Must Flow: a coreXY Sand Table
A 1.9 x 1 m table that uses a magnet to move a steel ball and draw geometric patterns in sand. The magnet is moved using a corexy mechanism driven by 3D printer controller board reading the patterns in the form of gcode files.
Design and Performance Evaluation of A Large FDM 3D Printer
This build includes the design of a large FDM 3D printer. This machine has a 796mm by 796mm by 900mm (LxWxH) build volume. Motion is controlled by servo motors and the printer runs on python-based marlin firmware.
Build Author MikieLikesIt Views 7376
Cousin CNC OX Router
A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.
Build Author SCYBUCK Views 4231
KYO SPHINX a la' SCYBUCK
KYO SPHINX, CENTROID ACORN, GECKO 540, HALL EFFECT LIMIT SWITCHES, 2.2 KW, 24,000 RPM SPINDLE, WATER COOLED, 600 oz-in STEPPERS, INTENDED TO CUT ALUMINUM.