Build List
Dragon Plasma cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you
V5- 2in1 ( 3dPrint+laser Engraving )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
2in1 ( 3dPrint+laser Engraving )
C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
A rigid and wide format, plate and carving CNC.
Yet another 1x1 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build a 1x1 Sphinx/Sphinx XL style CNC.
![LS-LASER](https://openbuilds.com/data/article_images/l/7/7304.jpg?t=1532805578)
Build Author
LukasK
Views
21606
LS-LASER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
My is just the biggest printer. with a printable area - 1760 x 1146 x 1318h
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I myself invented this concept printer form
Stinger-Panting Images in the Air
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.
![Acro System cable management and enclosure](https://openbuilds.com/data/article_images/l/7/7634.jpg?t=1537458611)
Build Author
Hilleke
Views
6544
Acro System cable management and enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
wooden parts of the enclosure can be removed easily used the existing extraction of my glass bead burners
Galvos
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
3d printable galvos
![Affordable Cartesian Printer (Initial Design)](https://openbuilds.com/data/article_images/l/6/6702.jpg?t=1537215566)
Build Author
Liam Dahler
Views
5477
Affordable Cartesian Printer (Initial Design)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This specific build page is a collection of screenshots sampling some of my initial SolidWorks design and pictures showing physical construction of the initial design. I will be creating individual build articles as I redesign, test, and implement new aspects of the printer.
![Ooznest OX CNC Machine](https://openbuilds.com/data/article_images/l/2/2084.jpg?t=1468952479)
Build Author
Ryan Lock
Views
129857
Ooznest OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
NotAnOx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
From plywood and linear rail to c-beam. I probably should have bought a kit.
![WorkBee CNC build - My honest opinion, tips and help](https://openbuilds.com/data/article_images/l/6/6407.jpg?t=1533433899)
Build Author
T4Concepts
Views
72389
WorkBee CNC build - My honest opinion, tips and help
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
![Touch screen macro imaging](https://openbuilds.com/data/article_images/l/7/7594.jpg?t=1536778987)
Build Author
stepper
Views
3317
Touch screen macro imaging
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a brief overview of the build of my macro imaging slide.
C-Beam unit with 400W Spindle
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Standard (If there is one) C-Beam with plnth
HandCrafted WorkBee - HCWB
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
![Another Sphinx 7550 Made by an Openbuilds Cbeam](https://openbuilds.com/data/article_images/l/6/6091.jpg?t=1521945969)
Build Author
pedrofernandez
Views
10623
Another Sphinx 7550 Made by an Openbuilds Cbeam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
![+Laser](https://openbuilds.com/data/article_images/l/7/7097.jpg?t=1525413539)
Build Author
BNMaker
Views
9989
+Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
Butterfly 3DP V 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
tronxy x3 like
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138941
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![OP C-Beam Machine XL by ChrisViral](https://openbuilds.com/data/article_images/l/7/7190.jpg?t=1528829194)
Build Author
ChrisViral
Views
5846
OP C-Beam Machine XL by ChrisViral
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Ultra MegaMax Dominator CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My self-designed and built, tall-format coreXY printer with 300 x 300 x695 mm print capacity.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8236
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4953
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
![Arduino Grbl Laser CNC](https://openbuilds.com/data/article_images/l/7/7170.jpg?t=1527625247)
Build Author
jpjoshua
Views
10780
Arduino Grbl Laser CNC
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered Laser CNC using GRBl firmware.
Pick and place
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Openbuilds Pick and Place using ideas from OpenPNP Frame work is from the Openbuilds Part store using 1000mm C beams and vslot 40x40 for support Surface is 3/4 " Particle board
LimpyCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
C_Beam X5L Hybrid_Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
classic router with a ab table
![Rat Rig V-Core 3D Printer ( Core XY )](https://openbuilds.com/data/article_images/l/7/7364.jpg?t=1531822676)
Build Author
Rat Rig
Views
28679
Rat Rig V-Core 3D Printer ( Core XY )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!
![Was once a mini mill](https://openbuilds.com/data/article_images/l/7/7328.jpg?t=1531492528)
Build Author
dreys
Views
10256
Was once a mini mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Working progress.
YAPCNC (Yet Another Poor's Man CNC)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Poor's Man CNC (YAPCNC) is my first attempt to build a CNC. The idea is for the build to be as inexpensive as posible while being usable for my goals.
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23122
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
1200X600 SPHINX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Need cnc to make alumunium sign, brass stamp, etc
Large format plasma ox
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I will update this as I go, cad files upon request. My x beam is basically a belt driven r7
Voxel Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.
1075 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.
Delta without vertices
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
As this is a build in progress, I will update it as I progress.
![V-Slot™ Belt & Pinion Example Build](https://openbuilds.com/data/article_images/l/0/97.jpg?t=1389473395)
Build Author
Mark Carew
Views
80950
V-Slot™ Belt & Pinion Example Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Makerparts Mpro Slider System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Makerparts.ca MPro Camera Slider System
![PhlatPrinter MK 3](https://openbuilds.com/data/article_images/l/5/5207.jpg?t=1497557010)
Build Author
Mark Carew
Views
32579
PhlatPrinter MK 3
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
![Mining Rig](https://openbuilds.com/data/article_images/l/7/7201.jpg?t=1529396612)
Build Author
mytechno3d
Views
4278
Mining Rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Crypto Mining rigs with vslot rail
![Voxel OX with Helix Gear Z Transmission (single z motor)](https://openbuilds.com/data/article_images/l/7/7174.jpg?t=1527989225)
Build Author
thehans
Views
5476
Voxel OX with Helix Gear Z Transmission (single z motor)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40557
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
36726
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
Workbee 1500x1500 belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Workbee CNC 1500x1500 with timing belt
Spartacus
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
Acro Pick And Place Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a machine for placing SMT components on PCBs. It is based on Acro system, off the shelf parts, and a number of custom 3D printed elements.
DPR-v2 full metal
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
pictures and mony doku see later
Plasma CNC, 4'6" × 8'8" v0318
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.
Behemoth cnc router with linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Behemoth cnc router build in progress using hiwil rails and closedloop servos.
Solid basics CNC router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
Laser engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Just a little light duty laser engraver.
Textile Drawing Machine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Textile Drawing Machine is a drawing machine thought specifically to draw on textile. Unlike other CNC machine it's dimensions follow the standard textile dimensions (1500mm) and it's on wheels to allow to draw on an unlimited area. TDM has been developed for the project Digital Wax Print, a self initiated research project, carried out by The Future Continuous, a collabration between Olivia De Gouveia and Eugenia Morpurgo.
frugal-ist workbee
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
a 1000x1000 acme screw workbee built as frugally as possible. thanks so much to ooznest and openbuilds :)
Big-X Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Minimill bundle, but with an extended X Axis
V-Slot MAME cabinet
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A minimalist MAME "cabinet" made from extrusion.
![3-Axis Plywood CNC](https://openbuilds.com/data/article_images/l/6/6478.jpg?t=1518460571)
Build Author
TurfnSurf
Views
5143
3-Axis Plywood CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
![CoreXY - e3d inspired](https://openbuilds.com/data/article_images/l/7/7021.jpg?t=1525161852)
Build Author
j0achim
Views
11111
CoreXY - e3d inspired
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
C-Beam Desktop On Rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.
![Torq Xtrdr](https://openbuilds.com/data/article_images/l/6/6202.jpg?t=1515760301)
Build Author
Keith Davis
Views
4497
Torq Xtrdr
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Light enough for high speed #3dprinting Strong enough for high speed #3dprinting
OX, of the house Steel
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OOZNEST Style OX machine with 3D printed panels
Minimill with slight modifications and v-slot table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a slightly-modified OpenBuilds minimill with some more Y travel and a v-slot table.
![SMW3D OX](https://openbuilds.com/data/article_images/l/7/7062.jpg?t=1524587974)
Build Author
Brandon Satterfield
Views
6443
SMW3D OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The SMW3D OX, original other than a lot of learning!
![Ooznest WorkBee 1000mm x 1000mm Screw Driven](https://openbuilds.com/data/article_images/l/7/7043.jpg?t=1524235621)
Build Author
Hussein Dermay
Views
5413
Ooznest WorkBee 1000mm x 1000mm Screw Driven
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have decided to buy and build the ooznest workbee screw driven cnc (1000x1000) and also decided to use some plates and extrusions from the ox cnc. I will never use two machines anyway and hoping to build a strong base for the workbee.
![Ooznest Ox CNC 1000 x 750](https://openbuilds.com/data/article_images/l/7/7029.jpg?t=1523991456)
Build Author
Kevr102
Views
4635
Ooznest Ox CNC 1000 x 750
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
Rail Builder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
glue/staple/eject 1 Axis driven Rail building machine.
WorkBee 750x750 build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).
1000 x 1000 Workbee powered by X controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
Repurposed Steel Table 4 x 8 Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Repurposed Steel Table for CNC Router Build.
C-Beam Machine XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
Skyggen 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A short summary of my Workbee CNC Build. I try to update it where I can
![WorkBee 1000x2000 ACME Screw Version](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Axnfell
Views
2283
WorkBee 1000x2000 ACME Screw Version
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...
Draw bot core xy
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
In the design stage. Help guide.
![ACRO 20x20](https://openbuilds.com/data/article_images/l/6/6923.jpg?t=1521926278)
Build Author
pedrofernandez
Views
6686
ACRO 20x20
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Acro Laser Machine Build
![Large cartesian gantry style 3D printer](https://openbuilds.com/data/article_images/l/4/4837.jpg?t=1493273871)
Build Author
Robert E. Nee
Views
14689
Large cartesian gantry style 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
TrueUp LZ
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.
Desktop 4-Axis Nema 23
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1389472486)
This build is specific to a furniture design I am trying to bring to market. My first attempt to build a machine. I have looked at other build submissions to help me figure out where I would like to start. The workable volume should 36" W x 6" D x 6" T. The goal is to become more comfortable with the electronics side of machines I enjoy using and also lower the cost of my product by reducing man hours in the manufacturing process. Yay!
TrueUp Bold
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A beefed up modification of the TrueUp Kit project
![Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)](https://openbuilds.com/data/article_images/l/6/6989.jpg?t=1522940325)
Build Author
Tommy Williamson
Views
5555
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Desktop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Silverchris's Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Work in Progress of a laser cutter design. Based on the CoreXY build from https://makerstore.com.au
C-Beam Machine - MyFirstCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
Something a Tad different
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Future CNC router kit design
![Shapeoko 1 upgrades](https://openbuilds.com/data/article_images/l/6/6957.jpg?t=1522235979)
Build Author
Limine3D
Views
3434
Shapeoko 1 upgrades
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.
ORCA Laser Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is my take on the Acro Laser system made from mostly salvaged, scrap, or leftover parts. I modified the plates in an attempt to maximize the cutting area and I wanted a lightweight adjustable Z axis.
![SG Duet Delta](https://openbuilds.com/data/article_images/l/6/6929.jpg?t=1522020583)
Build Author
John Bolduc
Views
5078
SG Duet Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This my version of a large no corners cut Delta.
![Live C-Beam Build @ MRRF2018](https://openbuilds.com/data/article_images/l/6/6899.jpg?t=1521464284)
Build Author
obmilllivebuild
Views
4737
Live C-Beam Build @ MRRF2018
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
Homemade CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This started as an attempt to learn to weld and quickly took on a life of its own.
20x24 inch Fixed Gantry Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I have shared many pictures of this project it is now complete I have had my first cuts on this machine and it is solid , still learning the new motion Controller. The Acorn is more like you would find on a commercial built CNC or CNC Lathe.But it does have all of the functionally one needs
![CNC Greenland Paddle Carver build](https://openbuilds.com/data/article_images/l/6/6221.jpg?t=1516031671)
Build Author
Andre Cooke
Views
15180
CNC Greenland Paddle Carver build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC mill for carving / milling Greenland Paddles
![Gooshpoo's H style cnc machine](https://openbuilds.com/data/article_images/l/6/6195.jpg?t=1521645997)
Build Author
Gooshpoo
Views
8013
Gooshpoo's H style cnc machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool project about my cnc machines unique style.
1 Cubic Meter 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a at home built 1000mm x 1000mm x 1000mm 3d printer. It uses mainly parts from OpenBuild Parts and is very simple to build. The only thing that was custom was the build plate which was designed by myself and tooled at a local machine shop.
![TEVO Little Monster Direct Mount Extruder](https://openbuilds.com/data/article_images/l/6/6905.jpg?t=1521508479)
Build Author
h3rb
Views
4426
TEVO Little Monster Direct Mount Extruder
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder
![The Archon R2](https://openbuilds.com/data/article_images/l/6/6643.jpg?t=1519678156)
Build Author
Sword66
Views
9915
The Archon R2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.
![1000x1000 Two version of router Belt and Screw](https://openbuilds.com/data/article_images/l/6/6637.jpg?t=1519558083)
Build Author
Janis93
Views
13754
1000x1000 Two version of router Belt and Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Generic 6 Axis Controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Generic 6 Axis (Stepper) Controller
Joe's Minimill Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I put this together to cut aluminum. Chips get everywhere! Cover your lead screws. Put the mill inside an enclosure. DON'T mount electronics (especially the power supply) inside the enclosure, chips will get into it and short it out. Remove the manual jog wheels, they contribute to chatter (something about having a mass on the end of the lead screw causes vibration). I cut at 14000 RPM, 0.05 inch width of cut, 0.05 inch depth of cut, 30 inches per minute and just barely avoid chatter.
![Lab Power Supply + Soldering Station](https://openbuilds.com/data/article_images/l/6/6861.jpg?t=1521067862)
Build Author
uGen
Views
17015
Lab Power Supply + Soldering Station
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
![TEVO Little Monster Marine Vinyl Removable Enclosure](https://openbuilds.com/data/article_images/l/6/6876.jpg?t=1520895331)
Build Author
h3rb
Views
2758
TEVO Little Monster Marine Vinyl Removable Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Make a vinyl burrito ENCLOSURE for your TEVO LITTLE MONSTER for < $30 (<$20 if you don't have your vinyl shipped!)
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)