Build List
![DIY C-Beam CNC](https://openbuilds.com/data/article_images/l/6/6586.jpg?t=1519158852)
Build Author
TurfnSurf
Views
5931
DIY C-Beam CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A short summary of my Workbee CNC Build. I try to update it where I can
![Ooznest Ox CNC 1000 x 750](https://openbuilds.com/data/article_images/l/7/7029.jpg?t=1523991456)
Build Author
Kevr102
Views
4654
Ooznest Ox CNC 1000 x 750
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
Minimill with slight modifications and v-slot table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a slightly-modified OpenBuilds minimill with some more Y travel and a v-slot table.
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4970
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Portable Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
![BA3DP](https://openbuilds.com/data/article_images/l/7/7789.jpg?t=1541092454)
Build Author
Bob Darrow
Views
6711
BA3DP
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A slightly more than one half cubic meter 3D Printer using V Rails, V Rollers, "C" Rail, mounting plates, and a bunch of 3D printed brackets to provide strength and stability to the frame. Rigidity was the goal and precision and accuracy the result. The software is a whole other topic, many weeks spent dialing that in to make the printer print.
![Sherline C-Beam with Offline Controller and MPG](https://openbuilds.com/data/article_images/l/7/7885.jpg?t=1542939611)
Build Author
James Evanko
Views
3067
Sherline C-Beam with Offline Controller and MPG
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.
Phil's Workbee
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Wanted a nice project to work and learn on... now have a big CNC to play with A 1500x1000mm Workbee
![The Forever Project](https://openbuilds.com/data/article_images/l/7/7977.jpg?t=1543788838)
Build Author
Bikes and Beer
Views
3836
The Forever Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Workbee 1010 Lead Screw with water cooled spindle and enclosure
"Stung by the Bee" OB Workbee 1010 Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.
![CNC ESS Controls System](https://openbuilds.com/data/article_images/l/8/8144.jpg?t=1548191018)
Build Author
Jacob Lotter
Views
4231
CNC ESS Controls System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Photogrammetry 3d Scanner
![](https://openbuilds.com/data/article_cat_images/s/0/298.jpg?t=0)
A mid-sized version of a Photogrammetry 3D Scanner.
![Plywood Built CNC Router](https://openbuilds.com/data/article_images/l/8/8769.jpg?t=1567635339)
Build Author
Project Hopeless
Views
13012
Plywood Built CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.
Openbuilds CubeBot 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian type 3d printer build
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8619
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
Based on 608 tube Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Simple steel tube design Plasma water table
1515 Deluxe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build features include a double c-beam gantry (bonded & mechanically fastened), linear x rails, custom gantry end plates, a custom linear rail & ballscrew Z axis, and custom lead screw tensioning plates. The primary goal was to remove twist from the 1500mm gantry & stiffen the Z axis.
![WorkBee 1010](https://openbuilds.com/data/article_images/l/9/9237.jpg?t=1583420438)
Build Author
txcomp
Views
5781
WorkBee 1010 "Get Rid of the Slop" Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My goals for this build were to eliminate slop and flex while also allowing easy serviceability.
![SolidCore CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/9/9334.jpg?t=1588996964)
Build Author
shanehooper
Views
12648
SolidCore CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular and Scalable CoreXY Printer with all metal parts.
![Prusa i3 Bear IDEX](https://openbuilds.com/data/article_images/l/9/9384.jpg?t=1593030770)
Build Author
Troy Joachim
Views
15622
Prusa i3 Bear IDEX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Remix of the Prusa i3 Bear with added IDEX
CNC China Router Conversion to Open Builds System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
![Beefed up Minimill](https://openbuilds.com/data/article_images/l/9/9488.jpg?t=1598294747)
Build Author
Yanou Fishel
Views
8645
Beefed up Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
![Scroll-saw Spiral Cutter](https://openbuilds.com/data/article_images/l/9/9872.jpg?t=1616597739)
Build Author
RSch
Views
3280
Scroll-saw Spiral Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Attached to a scroll saw you can cut nested wooden spirals with this jig. Make two, three, four ... interlocking spirals that unwind/unscrew. Fascinating toys or art objects!
![Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds](https://openbuilds.com/data/article_images/l/10/10012.jpg?t=1626972458)
Build Author
Quentin Karmark
Views
6110
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
Horizontal Cantilever or Vertical Diode Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Light weight portable Laser Engraver (6.5lbs - 12lbs)
6 Axis Motion Control Camera Rig (PAN, TILT, ROLL, SLIDE, FOCUS, ZOOM)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.
My C-Beam build and modifications
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.
Dash X Direct, Cross-Beam 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is the next version of Dash, now operating much closer to its potential. Please message me if you need anything, such as Simplify3D settings, material information, design intent etc. Since the Pack-and-Go zip file is fairly large (120mB), here is a link where it can be downloaded: https://drive.google.com/file/d/1Q3ygyo_tTrB4UYIV62_wtCSCbWuE3krT/view?usp=sharing Note: I use Solidworks 2022, acquired through their Solidworks for Makers program (check it out!). A super deal at $100/yr
![OpenBuilds Lead 1515](https://openbuilds.com/data/article_images/l/10/10293.jpg?t=1650393599)
Build Author
Shaun Weitzel
Views
4894
OpenBuilds Lead 1515
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of a Lead 1515!
2 Axis Lathe cutter
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
Rubber company use as a lathe cutter for accurate cuts compared to hand cutting.
Sphinx 66
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A Sphinx Linear rail build (600mm x 600mm) hence the title Sphinx66. Plates supplied by Chris Laidlaw. Linear rails used MGN15
![Optical Limit + Home Switches](https://openbuilds.com/data/article_images/l/0/512.jpg?t=1391894204)
Build Author
The Dude
Views
19318
Optical Limit + Home Switches
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
OpenBuilds OX 48x48 Aluminum
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Variant on the OpenBuilds OX CNC Router, enlarged with 1500mm length beams for a cutting area of 48" x 48". Based on the original model, the larger of the two, with the addition of a third 20x60 beam on the gantry for strength. Estimated cost is around $1100, minus the router.
3000x1500 CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.
Versabot - All metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.
The Buffalo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX 1500 x 1000 mm
![Portable Foam Cutter](https://openbuilds.com/data/article_images/l/1/1191.jpg?t=1412514842)
Build Author
Mohsen Abbasi
Views
7109
Portable Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A portable foam cutter to make your forms everyware using a LiPo Battery.
CNC Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.
Guitar shop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Great bit of kit time will tell if it is up to the job
![MultiBOT LRP](https://openbuilds.com/data/article_images/l/1/1525.jpg?t=1419199885)
Build Author
rusirius
Views
15408
MultiBOT LRP
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.
![V-Slot Modular Sit/Stand Desk](https://openbuilds.com/data/article_images/l/1/1615.jpg?t=1421190050)
Build Author
Mark Carew
Views
17515
V-Slot Modular Sit/Stand Desk
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
![M Cubed 3 Axis Bluetooth CNC Controller](https://openbuilds.com/data/article_images/l/1/1648.jpg?t=1423954156)
Build Author
M^3
Views
16516
M Cubed 3 Axis Bluetooth CNC Controller
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.
![MOX CNC](https://openbuilds.com/data/article_images/l/1/1666.jpg?t=1421937752)
Build Author
Kermareg
Views
16356
MOX CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103
![8x4 CNC build](https://openbuilds.com/data/article_images/l/1/1770.jpg?t=1426267360)
Build Author
Steve hope
Views
17548
8x4 CNC build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Routy cnc upgrade.
![3d printed 2.5' X 2.5' cnc plasma cutting machine](https://openbuilds.com/data/article_images/l/1/1865.jpg?t=1425780796)
Build Author
brw_racing
Views
14564
3d printed 2.5' X 2.5' cnc plasma cutting machine
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Improvements to a cnc plasma cutter i designed a while back. Not that it really needs it to work but i think it could be an improvement.
Longhorn OX (Under Construction and In Progress)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.
The Hoss
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The purpose of this build is to create a simple, strong modular build that is rugged enough to cut out some of the softer metals along with wood and plastics. Using basic parts like the universal plates, t-nuts and v- wheels coupled with the strength of C-Beam I am sure this will deliever the desired results!!
CoreXY Tower
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
C-BEAM 1K
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.
![Persnickety Plate Maker](https://openbuilds.com/data/article_images/l/2/2454.jpg?t=1439488214)
Build Author
motopreserve
Views
8328
Persnickety Plate Maker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...
OX TWO in ONE
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
What I'm doing is pretty self explanatory. I've put a few pictures up
1200 x 2700 CNC based on OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Preliminary design for cnc based on OX for cutting wood sheet products (ply, MDF etc.) for a sheet size of 1200mm x 2700mm
GrOX (OX based router)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
![C-Beam Double X](https://openbuilds.com/data/article_images/l/2/2566.jpg?t=1441949162)
Build Author
Laurence Carroll
Views
10209
C-Beam Double X
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Per the special notes its a variant of the C-Beam, Machine.... I have noticed that alot of people build a CNC router to cut parts for other larger CNC machines.. eg Delta Printers etc....plus this will enable me to cut parts for model RC plans UAV's etc...
Beaver's OX 1500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
![Hedron's build with Ooznest kit and Xylotex motors](https://openbuilds.com/data/article_images/l/2/2793.jpg?t=1445732078)
Build Author
Jesse Jenkins
Views
8770
Hedron's build with Ooznest kit and Xylotex motors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6736
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
![Neptunes Ox](https://openbuilds.com/data/article_images/l/2/2991.jpg?t=1467556198)
Build Author
Neptunes Guitars
Views
7503
Neptunes Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Tower Printer H-Belt type printer Prototype
![Metal MagBall Carriage](https://openbuilds.com/data/article_images/l/3/3071.jpg?t=1453052515)
Build Author
UltiBots
Views
12706
Metal MagBall Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.
Textile machine bearing structures CNC engraving machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
With the textile machine bearing feel better strength, better durability 用纺织机轴承感觉强度要好一些,耐用性更好
MakerSL MSL-6 DLP 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.
![OpenBuilds C-Beam Double Slider](https://openbuilds.com/data/article_images/l/3/3462.jpg?t=1463761241)
Build Author
cbordeleau
Views
11607
OpenBuilds C-Beam Double Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
laser add-on for C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
3.8 W laser add-on for C-Beam machine. Can easily be swapped with the router.
C-Beam Big Mouth
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.
4-axis C-Beam Hot Wire Wing cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
4-axis CNC Hot wire foam wing cutter
C-Beam based modular Resin Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The build is based on a 500mm C-Beam and the SeeMeCNC FlexVat. The C-Beam is both the linear motion and a structural element of the design. The frame that holds the 45 degree first surface mirror and the build vat can slide up and down the C-Beam to accommodate projectors with lenses at different elevations.
CO2 laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.
MY NEW CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build is not based on the ox, but got my ideas and inspiration from my first build,
MOJO 3D
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fast, Large build area, CoreXY design
![SmoothiebrainZ CBeam Machine](https://openbuilds.com/data/article_images/l/4/4120.jpg?t=1479069744)
Build Author
Maxime Favre
Views
8556
SmoothiebrainZ CBeam Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
Another 3D Printer using OpenBuilds Hardware only
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A light 3D printer made of OpenBuilds hardware only
Linear Rail for Dobot Magician
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This is a simpel build of a Linear rail for the Dobot Magician.
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
OX CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.
Mini D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.
V-Slot Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
v-slot linear actuator build.
The Budget Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An affordable large CNC machine, that so far has been easy to assemble
CNC Planning
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Reusing parts to build a CNC - planning stage
Codename: Gargoyle
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A stout 3D printer build with the hopes of being able to serve as a light mill (PCB) and laser engraver
BD's C-Beam Machine CNC Router (WIP)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC router table based on OpenBuilds C-Beam Machine bundle.
Miter Saw Station
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A Miter Saw station built using a Dewalt Miter Saw Stand and V-Slot extrusions.
X Axis Upgrade for AM8 (ANET All Metal)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My goal is to upgrade the acrylic ANET A8 to all metal.
C beam machine (with larger T-slot platform)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Larger, more rigid build plate C beam machine
Router Box
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This box is made from tough aluminum with plastic boards, helps hold WiFi Routers, Modems, or/ Ethernet Switches! The aluminum can resist the heat produced by these electronics, and the weight of the electronics, also being light itself. This box is the thing you need to hold your electronic devices!
![CNC Mini Mill Build](https://openbuilds.com/data/article_images/l/6/6068.jpg?t=1514513004)
Build Author
Lindsey Lewis
Views
6599
CNC Mini Mill Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC Mini Mill build with some mods after following standard build on Youtube video.
![Transformer](https://openbuilds.com/data/article_images/l/6/6215.jpg?t=1516203998)
Build Author
George Motichka
Views
3030
Transformer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted a machine that could easily switch between 3D Printing and Laser Engraving
![CNC Greenland Paddle Carver build](https://openbuilds.com/data/article_images/l/6/6221.jpg?t=1516031671)
Build Author
Andre Cooke
Views
15223
CNC Greenland Paddle Carver build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC mill for carving / milling Greenland Paddles
Hybrid shapeoko Xcarve cnc router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My scratch build using shapeoko, xcarve, and custom parts.
![Opening into doors](https://openbuilds.com/data/article_images/l/6/6336.jpg?t=1517233364)
Build Author
ShockingTops
Views
3574
Opening into doors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
![C-Beam - Sphinx 1000x1000mm inspired by Kyo](https://openbuilds.com/data/article_images/l/6/6611.jpg?t=1519313313)
Build Author
spark2
Views
4435
C-Beam - Sphinx 1000x1000mm inspired by Kyo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
Phlux Core XY Laser Etcher
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.
Big CNC plasma cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
more later
Something a Tad different
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Future CNC router kit design
![WorkBee 1000x2000 ACME Screw Version](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Axnfell
Views
2295
WorkBee 1000x2000 ACME Screw Version
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Hoping to build a WorkBee 1000 x 1000 (2000) from parts and not a kit, cannot afford the kit in full so going the long way round...
![SMW3D OX](https://openbuilds.com/data/article_images/l/7/7062.jpg?t=1524587974)
Build Author
Brandon Satterfield
Views
6451
SMW3D OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The SMW3D OX, original other than a lot of learning!
DPR-v2 full metal
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
pictures and mony doku see later
Large format plasma ox
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I will update this as I go, cad files upon request. My x beam is basically a belt driven r7
![Arduino Grbl Laser CNC](https://openbuilds.com/data/article_images/l/7/7170.jpg?t=1527625247)
Build Author
jpjoshua
Views
10805
Arduino Grbl Laser CNC
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered Laser CNC using GRBl firmware.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)