Welcome to Our Community

Some features disabled for guests. Register Today.

CO2 laser

Discussion in 'Laser Cutters' started by snokid, Sep 10, 2016.

  1. snokid

    snokid Master
    Staff Member Moderator Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    99
  2. snokid

    snokid Master
    Staff Member Moderator Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    99
    Just getting started, all I have so far is some brackets and mirror mounts.
    the end goal is a cutting area of at least 20"x 30"
    50 or 60 watt tube...
    stay tuned!!!
    Bob
     
  3. snokid

    snokid Master
    Staff Member Moderator Builder

    Joined:
    Oct 11, 2014
    Messages:
    335
    Likes Received:
    99
    20160910_193334.jpg
    mirrors.....
     

Share This Page