Build List
-
Active Filters:
in
3 Axis MultiTool - 3D printer, CNC Mill and Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So in short this build is a work in progress; it aims to make a large 3d printer, medium size CNC mill and a small plasma cutter all in one CNC unit.
OX-LX-3D
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX build - little large than specs and plates 3D printed
Rex
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
Viking OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My OX cnc upgrade.
![RIGCNC](https://openbuilds.com/data/article_images/l/10/10018.jpg?t=1627744108)
Build Author
Ryan155
Views
9193
RIGCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I made a mill from first principles because I didn't like any of the ones that were out there, More info can be found on the website RigCNC.com
Hybrid OX (Ball Screw, Linear Guides, Ect.)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Planning my first build. Hope to achieve a larger format yet rigid design.
![Naomi Wu's Automatic Bartender- BarBot!](https://openbuilds.com/data/article_images/l/6/6597.jpg?t=1519192094)
Build Author
Naomi Wu
Views
9102
Naomi Wu's Automatic Bartender- BarBot!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
![Swing Arm](https://openbuilds.com/data/article_images/l/9/9678.jpg?t=1607385200)
Build Author
OpenBuilds
Views
9101
Swing Arm
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way
Voxel OX Based Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Building upon the great work done by Marshall Peck and others. I have started a new build.
![BinaryConstruct V3](https://openbuilds.com/data/article_images/l/6/6740.jpg?t=1519873489)
Build Author
BinaryConstruct
Views
9048
BinaryConstruct V3
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.
BldrBox
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
OpenBuilds box type printer using min-v-wheels for X & Y axis. Designed for plexiglas panel enclosure of build area.
A very affordable CNC routing
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen
![crypt-cube](https://openbuilds.com/data/article_images/l/8/8354.jpg?t=1613674363)
Build Author
crypt-tek
Views
8936
crypt-cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Ultra MegaMax Dominator CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My self-designed and built, tall-format coreXY printer with 300 x 300 x695 mm print capacity.
laser add-on for C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
3.8 W laser add-on for C-Beam machine. Can easily be swapped with the router.
![1x1 Meter Laser Engraver](https://openbuilds.com/data/article_images/l/4/4584.jpg?t=1487243327)
Build Author
COMsulting
Views
8794
1x1 Meter Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Building of a big open frame laser engraver.
![Hedron's build with Ooznest kit and Xylotex motors](https://openbuilds.com/data/article_images/l/2/2793.jpg?t=1445732078)
Build Author
Jesse Jenkins
Views
8765
Hedron's build with Ooznest kit and Xylotex motors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
![mBOX](https://openbuilds.com/data/article_images/l/3/3916.jpg?t=1474807879)
Build Author
Asaku
Views
8748
mBOX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )
CNC 1000x1000mm C-beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
inspired by http://openbuilds.org/builds/c-beam-sphinx.3605/
![Dual Extruders 3D Printer - Zidex Upgraded](https://openbuilds.com/data/article_images/l/9/9102.jpg?t=1578282133)
Build Author
David Florian
Views
8635
Dual Extruders 3D Printer - Zidex Upgraded
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8607
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
![Beefed up Minimill](https://openbuilds.com/data/article_images/l/9/9488.jpg?t=1598294747)
Build Author
Yanou Fishel
Views
8589
Beefed up Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
![Plate Maker V-slot Table](https://openbuilds.com/data/article_images/l/5/5876.jpg?t=1510340593)
Build Author
Kyo
Views
8552
Plate Maker V-slot Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
![SmoothiebrainZ CBeam Machine](https://openbuilds.com/data/article_images/l/4/4120.jpg?t=1479069744)
Build Author
Maxime Favre
Views
8536
SmoothiebrainZ CBeam Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
Another C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is basically a Sphinx variant with few changes of my own...hope it'll work.
![Upgrading Your 3D Printer With Synchronous Leveling](https://openbuilds.com/data/article_images/l/9/9159.jpg?t=1580588676)
Build Author
Keith Davis
Views
8492
Upgrading Your 3D Printer With Synchronous Leveling
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Upgrading printers for Synchronous Leveling
![THE delta](https://openbuilds.com/data/article_images/l/7/7854.jpg?t=1542448684)
Build Author
deltajegga
Views
8457
THE delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
probably as big as you'd want it...
![Monster - a multiple material 3D printer with 20](https://openbuilds.com/data/article_images/l/2/2449.jpg?t=1441080761)
Build Author
Mike Andrews
Views
8439
Monster - a multiple material 3D printer with 20"(X) X 14"(Y) X ~20"(Z)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Laut3k derivative that goes for volume and large number of print materials at the same time. Using OpenBuild linear motion systems to get away from belt drives.
![Sphinx Evolution](https://openbuilds.com/data/article_images/l/6/6390.jpg?t=1520123783)
Build Author
Michael.M
Views
8435
Sphinx Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
Large 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hello ! This is my very first OpenBuilds build. It's based on the Maximus 3D Printer, published by mytechno3d : good source of inspiration !
12.5" x 12" Assembled Heated Build Plate
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Custom build plate for 300mm x 300mm (12"x12"). The hole pattern is for the 20x60 V Slot
Core XY My-BOT 500 x 500 x 1000
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first construction after many years buys ready devices.
![3D Printer 320x220x200](https://openbuilds.com/data/article_images/l/2/2381.jpg?t=1437294682)
Build Author
openhardwarecoza
Views
8349
3D Printer 320x220x200
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me
Jim's C-Beam Machine Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This machine is fantastic. Teamed up with Fusion 360, Inkscape, and GrblPanel, I'm well on my way towards making at least one Christmas gift this year. I had some frustrating times during the build, mainly with getting everything to go together square, but overall it was fun. I can see that I'm going to need to be a bit creative in order to max out the work area for this machine so that I can produce the product I bought it for, but it will be able to do so much more for me as well.
Desktop CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Stable solid, hope can cooperate with coolant in the future.
![1.4 meter tall build height, 300x410mm build plate cartesian](https://openbuilds.com/data/article_images/l/4/4797.jpg?t=1490545360)
Build Author
J-Wahl Dezign
Views
8266
1.4 meter tall build height, 300x410mm build plate cartesian
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
RSW's 3D Printer Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I recently completed my C-Beam Plate Maker build ( http://www.openbuilds.com/builds/rsws-c-beam-build.4286/ ) and quickly got the build bug. I was looking for something to make with the new C-Beam and decided its time to venture into the 3D printer world. I can honestly say I have never been in the same room with a 3D printer, so this is going to be a learning experience. I spent some time browsing the 3D printer builds and finally decided to copy the Talos3D by AlexLee.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8237
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
Pelican Case 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A portable 3D Printer that can flat pack into a hard carry case
![CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)](https://openbuilds.com/data/article_images/l/6/6421.jpg?t=1520257844)
Build Author
Nicademus
Views
8183
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
PnP 4 axis small/fast machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
Dream to practical
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.
MiniMill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a small mill to match my 7x12 lathe.
![Zorkbot](https://openbuilds.com/data/article_images/l/2/2140.jpg?t=1431624364)
Build Author
Anglesachse
Views
8156
Zorkbot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Corexy, with possible head change (3d, cnc, laser)
![3d nika](https://openbuilds.com/data/article_images/l/3/3663.jpg?t=1467561272)
Build Author
griso
Views
8145
3d nika
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
CORE XY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
![The Beast](https://openbuilds.com/data/article_images/l/9/9775.jpg?t=1612242250)
Build Author
M1dn1ghtN1nj4
Views
8107
The Beast
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
![C-Beam Prototype](https://openbuilds.com/data/article_images/l/3/3654.jpg?t=1467492770)
Build Author
Rwetzler
Views
8068
C-Beam Prototype
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Spindle cooling setup
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Cooling system for water cooled spindle.
![Gooshpoo's H style cnc machine](https://openbuilds.com/data/article_images/l/6/6195.jpg?t=1521645997)
Build Author
Gooshpoo
Views
8021
Gooshpoo's H style cnc machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool project about my cnc machines unique style.
![Heavy Inexpensive CNC](https://openbuilds.com/data/article_images/l/1/1143.jpg?t=1411852796)
Build Author
Richard Bugland
Views
7960
Heavy Inexpensive CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.
![Sphinx XL/R7](https://openbuilds.com/data/article_images/l/5/5224.jpg?t=1497737989)
Build Author
Hisha
Views
7945
Sphinx XL/R7
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000mm x 1000mm Sphinx/R7 build.
![Lead CNC 1510 modified](https://openbuilds.com/data/article_images/l/8/8843.jpg?t=1572455082)
Build Author
Marco964
Views
7875
Lead CNC 1510 modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
SolidCore CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
All metal CoreXY 3D Printer Design with triple z, kinematic bed, and scalable corexy mechanism.
Large 3D printer 12"x12"x12" with heated bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I want to have a printer to support senior projects. Also working on supporting 3D printing needs in the local community.
![Stainless OX Kit Build](https://openbuilds.com/data/article_images/l/5/5790.jpg?t=1511062628)
Build Author
Tucstrlly
Views
7799
Stainless OX Kit Build "Diamondback CNC"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
![CNC Line Boring Machine](https://openbuilds.com/data/article_images/l/3/3811.jpg?t=1470684250)
Build Author
Bridge Port
Views
7783
CNC Line Boring Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
![OX CNC 4'x4'](https://openbuilds.com/data/article_images/l/3/3018.jpg?t=1451324809)
Build Author
zann68
Views
7755
OX CNC 4'x4'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Tower Printer H-Belt type printer Prototype
![Foldable Rainwater Collector](https://openbuilds.com/data/article_images/l/0/931.jpg?t=1403768751)
Build Author
Mohsen Abbasi
Views
7750
Foldable Rainwater Collector
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.
![OpenBuilds CAndC - CNC Machine](https://openbuilds.com/data/article_images/l/2/2086.jpg?t=1430273821)
Build Author
CWidt
Views
7747
OpenBuilds CAndC - CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.
![Prusa Dragon LR](https://openbuilds.com/data/article_images/l/9/9496.jpg?t=1598488794)
Build Author
Sergio Di Ventura
Views
7744
Prusa Dragon LR
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Below are the details of my build and a good story for those who read till the end. Sorry for the grammar
Minimalist Laser Platform
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.
WorkBee 750x750 build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).
Linear Rail derivative with ball screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
basic start to design of cnc machine
Pink Panther - MendelMax variant
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Taller and wider MendelMax 1.5 spinoff
CNC Glass Grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
![M3D Squared](https://openbuilds.com/data/article_images/l/4/4583.jpg?t=1487205483)
Build Author
Limine3D
Views
7609
M3D Squared
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
![Laser Rotary Attachment](https://openbuilds.com/data/article_images/l/9/9724.jpg?t=1619880876)
Build Author
boutrous
Views
7609
Laser Rotary Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Build Summary updated after parts list completed
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7598
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![My Belt & Pinion Drive CNC Router](https://openbuilds.com/data/article_images/l/2/2512.jpg?t=1440728708)
Build Author
Justin Butler
Views
7587
My Belt & Pinion Drive CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
HAPP Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3D Printer is made to provide the most accurate results with the least amount of investment. This Printer is being designed to allow the common user to own a very accurate piece of machinery.
![My C Beam - NEMA 17 - GRBL- Arduino project](https://openbuilds.com/data/article_images/l/5/5076.jpg?t=1503064485)
Build Author
Huub65
Views
7531
My C Beam - NEMA 17 - GRBL- Arduino project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
![Neptunes Ox](https://openbuilds.com/data/article_images/l/2/2991.jpg?t=1467556198)
Build Author
Neptunes Guitars
Views
7496
Neptunes Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
![C-Beam Evolution MkII](https://openbuilds.com/data/article_images/l/4/4419.jpg?t=1494575087)
Build Author
mikev
Views
7493
C-Beam Evolution MkII
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
![Workbee](https://openbuilds.com/data/article_images/l/8/8114.jpg?t=1546590616)
Build Author
Christian James
Views
7479
Workbee "style" 1010 cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Triangular CNC Milling Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A wonky build to eliminate slop on a long Z axis
![Z-Axis Upgrade For My Sphinx](https://openbuilds.com/data/article_images/l/10/10387.jpg?t=1669503322)
Build Author
that-jim
Views
7445
Z-Axis Upgrade For My Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Z-Axis Upgrade For My Sphinx
![The](https://openbuilds.com/data/article_images/l/3/3100.jpg?t=1454389309)
Build Author
Julius
Views
7420
The "Hand" CNC (or OXCarve)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
more to come, please follow along the journey!
Ox Stainless with ballscrews
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
3D Printed Solid - Large Format Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I need a large build plate without spending 10-20k for a "store" built printer.
![DM C-Beam XXL Tank](https://openbuilds.com/data/article_images/l/5/5817.jpg?t=1509330303)
Build Author
dmasters
Views
7369
DM C-Beam XXL Tank
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
Yet another Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here's my Sphinx with a few slight modifications.
DoubleX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
This is a Dual X-axis platform.
![C-Beam™ Machine for PCB milling](https://openbuilds.com/data/article_images/l/6/6142.jpg?t=1517676287)
Build Author
Carl van Heezik
Views
7232
C-Beam™ Machine for PCB milling
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Machine for PCB milling
First Ever Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my first attempt at building my own 3d printer.
RRP - Roller Rack Pinion System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Current progress uses existing openbuilds bearings, but also uses 8mm shafts (custom)
MMXL - A MiniMill Conversion
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".
![Universal stand-alone filament spool holder (Fully 3D-printable)](https://openbuilds.com/data/article_images/l/1/1505.jpg?t=1418586739)
Build Author
CreativeTools
Views
7054
Universal stand-alone filament spool holder (Fully 3D-printable)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.
3D Printer DELTA
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed
![Rack and Pinion Cartesian Mill](https://openbuilds.com/data/article_images/l/9/9020.jpg?t=1576955758)
Build Author
Joe F
Views
6997
Rack and Pinion Cartesian Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Panther Printer - Lautr3k
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My version of the popular Lautr3k 3D printer. UNI Panther colors of Purple and Yellow on black V-slot rails. 300x300 bed.
Butterfly 3DP V 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
tronxy x3 like
![Panther 3D printer](https://openbuilds.com/data/article_images/l/4/4577.jpg?t=1568965395)
Build Author
taratata2016
Views
6933
Panther 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
My Second CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
In short...this was a fun project.
![Modular Desktop Vacuum Former](https://openbuilds.com/data/article_images/l/10/10098.jpg?t=1636207085)
Build Author
lekey
Views
6874
Modular Desktop Vacuum Former
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.
My first OX build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
![Rotomolder](https://openbuilds.com/data/article_images/l/0/618.jpg?t=1395618265)
Build Author
John J Talavera
Views
6824
Rotomolder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple low cost rotomolder.
Hydraulic lifting table
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I started this project without drawing. in itself this went fine with some minor adjustments. My profession is machine builder that might make it a little easier. I still enjoy it every day.
cera.tops Clay 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3d printer framework was designed for use with the ceraStruder clay 3D printing extruder. More info coming soon.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)