Welcome to Our Community

Some features disabled for guests. Register Today.

CNC ROUTER BUILDS

Lead 1515 tilting table and vertical table accessory

Feb 23, 2024
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.

Openbuilds 4x8 cnc

Aug 14, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I built this cnc using 2 z axis actuators thinking it would minimize deflection and it seems to be very sturdy. I used 2 1500mm c channels for my x axis, 1 1500mm c channel for my y axis, nema 23 stepper motors, dm556 drivers, 2 24v power supplies, smc5-5-n-n controller, 9mm wide belts, and the Hitachi m12vc router. So far it's working very well with a few hiccups. Programming the controller was a learning experience but I'm very happy with it.

Sphinx 55

Feb 10, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.

My large machine 48 X 48

Nov 26, 2023
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This machine is controlled by a Mach3 BOB. I USED Nema 34 stepper motors and a 3kw, water cooled spindle. I’m in the process of adding a vacuum table with 4 zones. I have an X-carve so I use Easel to create G-code for the large machine. I’m currently looking for a way to stabilize the Y-axis. It wiggles a little, so I want to add another linear rail high on both sides.

Portable self-contained Lead 1010 table

Jul 18, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

I have a two car garage NOT devoted to 3d printing or CNC. I have set aside a space for my 3d printer and a place to store my portable CNC table. The reason it’s portable is so that I wheel and can use my Lead 1010 outside where it won’t make a mess in the garage. The table is self contained. It houses a vac system as well as my CNC tools and supplies.

WorkBee CNC Machine

Nov 20, 2023
Category
Cartesian Style CNC
Build Progress
Build Complete!

The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.

Ooznest OX CNC Machine

Sep 17, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.

Techsoft Roland TS-30 rebuild

Sep 6, 2023
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Replacing the Electronics and Spindle. Intending to rewire all the buttons and make it into a more modern and easy to use CNC.

Sphinx 1050

Dec 4, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.

Salmon Sphinx 1.0

Jul 22, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.

1500x1000 CNC Router

Aug 10, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

1500x1000, additional frame stiffening from laser cut Stainless steel bracing plates, Nema 34 motor upgrade and Hiwin 16mm ballscrew additions on the way. Ethernet Smooth stepper control, 2.2kw Water cooled spindle. Schneider atv320 variable speed drive. SICK inductive limit switches, Leadshine Em882S stepper drivers ,1kw 62V supply for Stepper drives

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

UltiBots CB3030 CNC Router

Jul 18, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.

Sphinx 66

Apr 17, 2023
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A Sphinx Linear rail build (600mm x 600mm) hence the title Sphinx66. Plates supplied by Chris Laidlaw. Linear rails used MGN15

Beefed up Minimill

Aug 24, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.

ALl included interface

Apr 8, 2023
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I have not too much space and need a portable solution, and tired of cleaning the electronics I decide to put everything inside a box and this is the result.

Custom 4x4 CNC

Nov 5, 2022
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I started designing and ordering parts for this build back in Oct 2021. Unfortunately life got in the way and I had to sideline the project to deal with more important projects. I am now back working on this project full time. I originally was building a MPCNC on this torsion box platform I built but quickly realized how difficult it would be to produce anything with good accuracy. So I decided to design my own CNC that would be more robust and accurate.

OpenBuilds OX CNC Machine

Apr 23, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD

Nov 18, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD

Sphinx 55 on MGN12 linear rails

Sep 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw

C-Beam Mini Mite

Jul 9, 2022
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.

C-Beam Prefab Untitled

Sep 24, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.

C-beam charmer

Apr 21, 2022
Category
Other Style CNC Mills
Build Progress
Build in Progress...

Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth

Workbee CNC Router/Laser/Plotter

Jan 31, 2022
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.

ACME OX (A Lead Screw Driven Ox Derivative (850x1500))

Nov 2, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.

DIY CNC Machine

Jun 8, 2019
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.

The Growler

Feb 27, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.

FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router

Jan 13, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.

myOX : a 4' x 2' OX CNC with potential

Mar 14, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM

C-Beam XXLarge "Tank"

Jan 14, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.

C-Beam Lead Screw CNC Mountain

Aug 28, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.

WorkBee CNC build - My honest opinion, tips and help

Sep 14, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.

Robo Morten

Aug 24, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.

CubeFoot CNC

May 8, 2014
Category
Cartesian Style CNC
Build Progress
Build Complete!

This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.

GRANITE 1.0

Dec 25, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.

OB Lead 1515 CNC Router 2021

Feb 14, 2022
Category
Cartesian Style CNC
Build Progress
Build Complete!

Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.

C-beam Machine - Modesty

Dec 27, 2021
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Modified C-beam Machine. Taller (30 cm) C-beam uprights in gantry, and longer 750 mm frame in Y direction. XL gantry plate on X (and Z?). Y will have additional 700 mm SBR16 rails as extra support and slightly raised bed to fit above stepper motor. Approx. machinable area of 370 x 370 mm.

Lead 1510

Nov 25, 2021
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js

LEAD 710 with High Z mod

Nov 14, 2021
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Overview of a 700mm x 1000mm machine based on the LEAD design and with the High Z mod from the start. Will have a parts list you can use to build yourself if you like the formfactor

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice