Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

C-Beam® Double Wide Gantry Actuator

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build actuator is configured to have not only strength, but accuracy! This low profile option offers endless possibilities, and we cant wait to see how this actuator is implemented in your build ideas!

Laser Cutter/Engraver OptLaser 6W with Z-axis

Dec 8, 2017
Category
Laser Cutter Builds
Build Progress
Build Complete!

This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.

CoreXY - e3d inspired

May 1, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Hyatt and My Journey to Tonehenge

Dec 1, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?

"Stung by the Bee" OB Workbee 1010 Build

Oct 4, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.

Modified LEAD machine

Sep 27, 2019
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

CoreXY 3D build one

Sep 20, 2019
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

Cnc Mill using standard and 3d printed cimponents

Sep 20, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.

The FEEDBACK FRACTAL Build

Sep 20, 2019
Category
Everything Else
Build Progress
Build in Progress...

The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.

D&R Tiger Paw build combo

Feb 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.

Reworked Routkit SD

Jul 28, 2019
Category
Other Style CNC Mills
Build Progress
Build Complete!

I could not "tram" the spindle to the table. I found that the V Rails could not accurately be adjusted so the Gantry was equal distance from the spoilboard in multiple places.

Minimalist Laser Platform

Aug 18, 2019
Category
Laser Cutter Builds
Build Progress
Build Complete!

Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.

Laser Displacement Golf Ball Scanner

Jul 26, 2019
Category
Turntable 3D Scanner
Build Progress
Build Complete!

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

Openbuilds C-beam

Nov 22, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

KeePrint Monster

Jun 22, 2019
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.

Mushu - Large Scale CoreXY

May 6, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.

South Carolina Workbee 1000X1000

Jun 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

PrintAir CoreXY

Oct 3, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.

CNC FOR EVERYONE!

May 12, 2014
Category
Other Style CNC Mills
Build Progress
Build Complete!

This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.

Black out Edition Workbee 1010

Nov 28, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..

PhlatPrinter MK 3

Jun 20, 2018
Category
Other Style CNC Mills
Build Progress
Build Complete!

The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.

DTG OX

Oct 28, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.

the Feedback Fractal project

May 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.

Shapeoko 2 - my first CNC

Jan 4, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

This was my first foray into CNC. I chose to go with a reliable kit build since my knowledge of GCode, controllers, and steppers was pretty rudimentary.

Rostock TETRA V0

Nov 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.

SMD Pick and place machine - Smoothieboard/OpenPnp

Apr 8, 2019
Category
Circuit - Software Project
Build Progress
Build in Progress...

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.

Coined by my family as the: Davomatic

Aug 12, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.

Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT

Mar 26, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.

LimpyCNC

Jul 25, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.

Clear Acrylic Dust Shoe

Mar 17, 2019
Category
Everything Else
Build Progress
Build Complete!

Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.

Vox Solid State

Mar 15, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).

C-Beam Machine Build

Mar 13, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my first CNC router build. I want to gain basic CNC building experience so I can go on to build other items such as a frosting or pancake printer.

Lautr3k RepRap

Feb 12, 2015
Category
Cartesian Style Bots

A 3D printer without belts, a print volume of 320x320x260mm, obviously the V-Slot as linear guide! and a maximum of printed pieces.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice