Build List
Cbeam Digital Mitre Saw Fence
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Work in progress.. but nearing completion :)
Soundproof case for Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Not much to say... Soundproofing box for noisy works... Build in MDF and 20 mm plexiglas. Very effective!!!
![Stinger Laser](https://openbuilds.com/data/article_images/l/4/4877.jpg?t=1491777619)
Build Author
Kyo
Views
14227
Stinger Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
3-Axis CNC Laser Engraver running grbl 1.1 in laser mode and Laserweb4.
Kool Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mid range build.
![Sphinx rigid XL](https://openbuilds.com/data/article_images/l/4/4903.jpg?t=1492143643)
Build Author
Apothus
Views
21005
Sphinx rigid XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Rigid variant of the C-Beam sphinx platform
Extendable Mini Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Another MiniMill, different to the OpenBuilds version and potentially more flexible because of the design.
![K40 Laser Build (Major Changes)](https://openbuilds.com/data/article_images/l/5/5867.jpg?t=1510191534)
Build Author
Superslinky
Views
8654
K40 Laser Build (Major Changes)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Major K40 Laser Mod
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
![Vox Solid State](https://openbuilds.com/data/article_images/l/6/6030.jpg?t=1513689971)
Build Author
CharlieShimota
Views
14390
Vox Solid State
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
C_Beam Hammerhead 5x
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
setup for learning 5x
![BinaryConstruct V3](https://openbuilds.com/data/article_images/l/6/6740.jpg?t=1519873489)
Build Author
BinaryConstruct
Views
9041
BinaryConstruct V3
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.
YAPCNC (Yet Another Poor's Man CNC)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Poor's Man CNC (YAPCNC) is my first attempt to build a CNC. The idea is for the build to be as inexpensive as posible while being usable for my goals.
Ultra MegaMax Dominator CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My self-designed and built, tall-format coreXY printer with 300 x 300 x695 mm print capacity.
![Sphinx Z-axis upgrade](https://openbuilds.com/data/article_images/l/7/7512.jpg?t=1539834608)
Build Author
Andreas Bockert
Views
10528
Sphinx Z-axis upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Workbee 1015 (50" wide by 30")
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Workbee able to cut 48"x24" material, built to continuously feed material so one can cut full sheets of ply.
![MPG Jog Controller for CNC xPRO](https://openbuilds.com/data/article_images/l/8/8235.jpg?t=1549135510)
Build Author
Spark Concepts
Views
4397
MPG Jog Controller for CNC xPRO
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Been playing around with an MPG Jogwheel
![crypt-cube](https://openbuilds.com/data/article_images/l/8/8354.jpg?t=1613674363)
Build Author
crypt-tek
Views
8931
crypt-cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
KeePrint Monster
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.
18x36x16 Inch 3D Printer - Work in progress
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Tough 3D Printer using OpenBuilds Parts!
![Sphinx 55](https://openbuilds.com/data/article_images/l/9/9795.jpg?t=1612990846)
Build Author
Kyo
Views
22764
Sphinx 55
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
Gigantesque CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a upgrade to make a little deeper and a little bigger foot print for cutting. This is a copy of design off Rob Taylor idea for Dbl C Beam setup. The goal though is to design it around a new build with minimal tools for some one with no cnc access. Drillpress and drill bits and tap set. A 10in Non ferrous metal cutting blade for my table saw. Paper printer for printing DXF files.
![1500x1000 CNC Router](https://openbuilds.com/data/article_images/l/9/9953.jpg?t=1621753109)
Build Author
Scott Drake
Views
15376
1500x1000 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1500x1000, additional frame stiffening from laser cut Stainless steel bracing plates, Nema 34 motor upgrade and Hiwin 16mm ballscrew additions on the way. Ethernet Smooth stepper control, 2.2kw Water cooled spindle. Schneider atv320 variable speed drive. SICK inductive limit switches, Leadshine Em882S stepper drivers ,1kw 62V supply for Stepper drives
![RIGCNC](https://openbuilds.com/data/article_images/l/10/10018.jpg?t=1627744108)
Build Author
Ryan155
Views
9159
RIGCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I made a mill from first principles because I didn't like any of the ones that were out there, More info can be found on the website RigCNC.com
![3D Printer - Big Size](https://openbuilds.com/data/article_images/l/0/264.jpg?t=1386177861)
Build Author
AK-Creation
Views
21132
3D Printer - Big Size
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I creat a open source 3D Printer to print big things. Print size: 400x500x300 mm. You can download the Drawing in PDF and in Inventor 2013 format. The unwinding drawings are also included. I take some detail photos for a better understanding.
Suitcase Vacuumformer
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Quick overview of my build up for a vacuum former that is self contained, portable and fairly easy to build.
![RepRap Tuga](https://openbuilds.com/data/article_images/l/0/390.jpg?t=1389473261)
Build Author
pdesigns
Views
27689
RepRap Tuga
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a work in progress(not printing yet). Expect this instructions to grow with time, but for now it is mainly interesting for those who want to take part in developing this printer.
Tool position setting Part I
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
The method used for tool position setting is a matter of personal choice but this is what I do.
![Griffin Delta Printer](https://openbuilds.com/data/article_images/l/0/580.jpg?t=1394102731)
Build Author
Sheepdog
Views
25364
Griffin Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
![V-Slot® NEMA 17 Linear Actuator Bundle (Lead Screw)](https://openbuilds.com/data/article_images/l/0/634.jpg?t=1396042506)
Build Author
Mark Carew
Views
102519
V-Slot® NEMA 17 Linear Actuator Bundle (Lead Screw)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Example model of lead screw driven actuators for your next project!
Small Red OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small router for thin plate stock
![M Cubed CNC Mill](https://openbuilds.com/data/article_images/l/1/1634.jpg?t=1421382482)
Build Author
M^3
Views
20549
M Cubed CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A no-nonsense CNC mini mill to get the job done.
CNC Jr.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small, quiet and clean desktop CNC designed for fine cutting.
kukatype 3d printer open source
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
im just starting and the size of this is 1.5 meter from base to end
![Triple Shot R-P-M Area 51 CNC Parts](https://openbuilds.com/data/article_images/l/2/2307.jpg?t=1444529606)
Build Author
Hytech2k
Views
32608
Triple Shot R-P-M Area 51 CNC Parts
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
BAFP 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!
Roberta Clementine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The Roberta Clementine a proof of concept and progenitor to the series of printers I will be calling the Clementine Sisters. The printer is named after Pittsburgh Pirates baseball player Roberto Clemente. Although it is more accurate to say the printer is named after the school I work for which is named after Clemente the Roberto Clemente Charter School. http://www.myrccs.com Roberta is the first and not really built to last but instead built to test ideas and to produce the parts for successors
![Archer - An extendable all metal 3D printer](https://openbuilds.com/data/article_images/l/3/3539.jpg?t=1468604303)
Build Author
James Archer
Views
12251
Archer - An extendable all metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
6024
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
My C-Beam 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Larger format FDM printer using C-Beam linear stages
KALΔIS OPEN SLA
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular easy to adjust scale of the entire build Tablet/LCD monitor SLA 3d Printer.
Schematix Ox-Metal Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
C-Beam XXLarge "Laser "Tank""
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A re-imagining of Dollarz81's XXL Tank in Laser form
Desktop PCB Maker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
With the focus always on larger builds I wanted to focus on a desktop PCB milling machine that fulfills the average users desktop needs at an entry level cost. Design considerations will allow expandable capabilities to include 3D printing and any other functions a small form Cartesian robot can perform. The current iteration has a desktop footprint of approximately 15.5" X 14.5".
3D PrintBot 500x500x500
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large scale True 500x500x500 build volume 3D printer.
Table Saw Fence
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Trying to build a low cost table saw fence using v-wheels
![CRH C-BEAM Router, steel capable](https://openbuilds.com/data/article_images/l/4/4663.jpg?t=1488314646)
Build Author
chenderson
Views
11272
CRH C-BEAM Router, steel capable
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam based CNC router using mostly openbuilds parts.
RSW's 3D Printer Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I recently completed my C-Beam Plate Maker build ( http://www.openbuilds.com/builds/rsws-c-beam-build.4286/ ) and quickly got the build bug. I was looking for something to make with the new C-Beam and decided its time to venture into the 3D printer world. I can honestly say I have never been in the same room with a 3D printer, so this is going to be a learning experience. I spent some time browsing the 3D printer builds and finally decided to copy the Talos3D by AlexLee.
CoreXY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY cube with 600x600x800 volume.
TrueUp Bold
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A beefed up modification of the TrueUp Kit project
![V-Slot Hand Cutting Jig](https://openbuilds.com/data/article_images/l/5/5796.jpg?t=1508932950)
Build Author
pek
Views
5155
V-Slot Hand Cutting Jig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
To help cutting v-slots with hand saw
![Joe Harris's all metal CNC Router build](https://openbuilds.com/data/article_images/l/5/5982.jpg?t=1512418579)
Build Author
Joerharris
Views
5768
Joe Harris's all metal CNC Router build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
ACRO 150 X 150 CM
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Openbuilds ACRO
![](https://openbuilds.com/data/article_images/l/6/6636.jpg?t=1519564949)
Build Author
Glenn Weston
Views
9403
"AcroCadabra" My Acro Laser built with my C-Beam XL
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.
![Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)](https://openbuilds.com/data/article_images/l/6/6989.jpg?t=1522940325)
Build Author
Tommy Williamson
Views
5547
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Desktop 4-Axis Nema 23
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1389472486)
This build is specific to a furniture design I am trying to bring to market. My first attempt to build a machine. I have looked at other build submissions to help me figure out where I would like to start. The workable volume should 36" W x 6" D x 6" T. The goal is to become more comfortable with the electronics side of machines I enjoy using and also lower the cost of my product by reducing man hours in the manufacturing process. Yay!
![Goliath - CNC + 3D printer Hybrid](https://openbuilds.com/data/article_images/l/7/7908.jpg?t=1543269326)
Build Author
Joe Young
Views
4495
Goliath - CNC + 3D printer Hybrid
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
![CoreCube3D - A CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/8/8109.jpg?t=1546581339)
Build Author
CoreCube3D
Views
18847
CoreCube3D - A CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
The BEE and ME
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
My giant "WORKBEE" 1750mm X 1750mm by ooznest
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC MACHINE WORKBEE'S table making
Gary's Mod Plates for OX Heavy Duty X and Z
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Gary's take on the OX HD X and Z plates, making it stiffer, adding mini wheels to the C-beam and Quick removable Z axis.
![Prusa Dragon LR](https://openbuilds.com/data/article_images/l/9/9496.jpg?t=1598488794)
Build Author
Sergio Di Ventura
Views
7739
Prusa Dragon LR
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Below are the details of my build and a good story for those who read till the end. Sorry for the grammar
Another C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is basically a Sphinx variant with few changes of my own...hope it'll work.
![Hotwire cnc Surfboards](https://openbuilds.com/data/article_images/l/9/9769.jpg?t=1667476118)
Build Author
2SIsurf
Views
4716
Hotwire cnc Surfboards
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
Fixed Gantry CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A fixed gantry router using OpenBuilds control and electronics.
3D printer for printing Clay/Paste
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I designed this 3D printer from scratch for my mechanical engineering capstone project. It's made for printing clay but should be able to print any paste material. The clay extruder system could be easily modified to work with almost any 3D printer. The printer is approximately the same size as an Ender 3.
![V-Slot™ Mini V Linear Actuator](https://openbuilds.com/data/article_images/l/0/48.jpg?t=1444073092)
Build Author
Mark Carew
Views
88273
V-Slot™ Mini V Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
Tool position setting Part III.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
In this, the final part, I would like to introduce Machine Vision and show how it can be used, not only for tool position setting but also for resolving the triangle to calculate the G68 (local system rotated) for jobs which are not squarely placed on the work table.
Cheetah 1.1 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I hope to have a working prototype built soon.
plasma cnc
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Homemade plasma cnc
Routy GT2 300 BSX CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
DTG OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
![CNC Router Lathe](https://openbuilds.com/data/article_images/l/2/2145.jpg?t=1466800036)
Build Author
Rakmup
Views
39575
CNC Router Lathe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
![OneZ](https://openbuilds.com/data/article_images/l/2/2278.jpg?t=1439834998)
Build Author
Keith Davis
Views
16440
OneZ
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.
Hot Wire 4 Axis CNC Foam cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
OX-Based Self-Contaned HVLP Spray Booth
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A CNC HVLP spray booth based on OX.
![V-Slot Laser cutter and engraver](https://openbuilds.com/data/article_images/l/2/2617.jpg?t=1442812649)
Build Author
Yoshiya Arii
Views
39102
V-Slot Laser cutter and engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
![PrintAir CoreXY](https://openbuilds.com/data/article_images/l/2/2718.jpg?t=1443856231)
Build Author
Keith Davis
Views
18049
PrintAir CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.
Laser Mount
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is a mount I wanted to build for a laser project using OpenBuilds part router mount.
Small Laser Engraver Concept
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Low cost Laser Engraver build using all off-the-shelf components.
SCoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0
Hlidskjalf, CoreXYU (dual X-carriage)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
Desktop CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Stable solid, hope can cooperate with coolant in the future.
The Almost Perfect 3 Way Mitre (with MakerLinks)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A quick and easy way to make a 3-way mitered corner using MakerLinks
Table saw fence and guide
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The idea was to build a proof of concept table saw fence similar to a thru-rip or accusquare fences which retail for 400$, with the added option to motorize the positioning.
MakerSL MSL-21 OB Minimill Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Simple enclosure for the OB Minimill
Robo Morten
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
100w Laser Cutter Build Log
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I rebuild my 2 meter tall 3D printer into a 100w laser cutter
C-Beam Sphinx Vacuum
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified 1000x1000 Sphinx, with a built in vaccum table.
SkyKae sphinx - c beam xl hybrid
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I took what I thought were the best parts of the sphinx and the c beam xl to build a bigger and faster machine.
New 2 watt laser platform
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Acro based 2 watt laser platform
Yamm (Yet another MiniMill)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First time CNC user having a good time with a MiniMill
![Gantry CNC - Decisions made only to change over and over.](https://openbuilds.com/data/article_images/l/6/6164.jpg?t=1515724331)
Build Author
GDanger117
Views
10361
Gantry CNC - Decisions made only to change over and over.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!
![Torq Xtrdr](https://openbuilds.com/data/article_images/l/6/6202.jpg?t=1515760301)
Build Author
Keith Davis
Views
4495
Torq Xtrdr
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Light enough for high speed #3dprinting Strong enough for high speed #3dprinting
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11653
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
EOX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Open builds style wood CNC router. Usable work aria 1000mm x 1250mm x 150MM (X x Y x Z). 80x40 C bleam for the Y axis , two 60x20 beams for X axis and a 60x20 fo Z. Interlocking GT3 belts for X and Y. Looking to change over to a rack and pinion system in the future. 8x8Tr Lead screw for the Z. Leadshine HBS507 close loop drivers and 3-phase servo motor 573HBM20-EC-1000 motors driving the Y and X axis. Would recommend them to anyone looking for servo like performance at a affordable price.
Draw bot core xy
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
In the design stage. Help guide.
![+Laser](https://openbuilds.com/data/article_images/l/7/7097.jpg?t=1525413539)
Build Author
BNMaker
Views
9985
+Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
29247
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
HandCrafted WorkBee - HCWB
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)