Build List
-
Active Filters:
ma
Build Author Rick Holder Views 13761
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
Build Author Rodrigo Gonzalez Views 2827
Nightfuel
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
Build Author Rob Withoff Views 3780
Mini-Mill Enhanced
Some enhancements of the basic mini-mill
Build Author Denis Lapratte Views 3287
All metal Ox hybrid CNC Router Table
This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.
Build Author Daniel.korneliussen Views 2584
Reprap prusa mendel i2 Frankenstein 2018 build
Mad plumbers choice what Else can i say?
Build Author obmilllivebuild Views 4671
Live C-Beam Build @ MRRF2018
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
Rail Builder
glue/staple/eject 1 Axis driven Rail building machine.
My Little Mashup
A mixed drive, PI Controlled machine
Build Author David Hartkop Views 2109
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Sphinx 7575
Sphinx CNC modified to 750mm x 750mm c-beams. Parts not readily available in South Africa, so i have to make some modifications...
Build Author patnap71 Views 5523
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author holographic Views 6524
Laser DIY
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
Build Author Cosmosteel Views 3599
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author KronBjorn Views 3598
WorkBee Lead 1010, Reduced Footprint, Nema17
This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.
Build Author Fábio Pires Views 5959
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
Add more V-Slot to my Makerfarm 10" Prusa i3v
Upgrade my 5 year old Makerfarm printer to use more V-Slot
LayerFused C201 - DIY 3D Printer Build, i3 Style
My DIY 3D Printer build which is similar to an i3 style printer. This is a fully documented step-by-step build with videos.
Build Author Sonny Lowe Views 5236
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
Build Author Robert Mech Views 7683
LayerFused X301 - CoreXY Large Volume Printer
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
Retractable WorkBee1510 with Marlin+MarlinPanel high level build
WorkBee1510 with retractable space saving stand and customize build Marlin firmware and MarlinPanel (GCode Sender/UI)
Fastmill CNC
Very cheap CNC made from laser fired and bent parts.
Remote Toiler Flusher!
This project provides an easy method for my granddaughter to use the facilities in the smallest room of the house! The toilet cistern is located in the garage and was originally manually activated by a pushbutton connected via a cable. The location of the pushbutton - combined with the stiffness of the mechanism made it tricky for her to use. This project provides a solution to the problem.
Home made CNC Plasma Cutter
Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.
Build Author nicklogan Views 15210
MDF Delta
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
Build Author John J Talavera Views 10818
CNC FOR EVERYONE TITAN CNC ROUTER
www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!
Router / Plasma Prototype Build
this is my first attempt at a CNC Table
1500x1000 (4x2) Router - OX derivative
OX build with 1.5m gantry the 1m deep table.
Pink Panther - MendelMax variant
Taller and wider MendelMax 1.5 spinoff
cnc plasma table
ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer
3 Axis MultiTool - 3D printer, CNC Mill and Plasma Cutter
So in short this build is a work in progress; it aims to make a large 3d printer, medium size CNC mill and a small plasma cutter all in one CNC unit.
Build Author KBill Views 12189
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Vic Aussie Ox
Dove in and ordered the kit from Makerstore in Melbourne. While awaiting for the order watched videos and sourced steppers and controllers from China. Had some fun with the 4 axis TB6600 controller board. Ran into a few problems with the build, but after stripping and restarting looks like I am on track.
C-Beam Plate Machine
My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...
Build Author evil2002usna Views 10411
Evil Ox
Cheap Ballscrew Ox CNC Router.
Build Author Sonny Lowe Views 4961
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Powder coated multi CNC Z Axis plasma adapter with Prox.
Powder coated multi CNC Z Axis plasma adapter with Proximity sensor. . It can also hold a 80mm Router head/Spindle as seen in my router build.
PCBman CNC
This is a design for a desktop CNC machine. It may be a router or laser. I am undecided as to the final design.
Reborn as the Soccer Pitch for our Robot Spider Soccer game - Robotics/Maker Club Teaching Cart
The Soccer Pitch for our Robot Spider Soccer game
Build Author dodgenet Views 5480
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
The Artist Formerly Known as Prints
Work in progress large volume CoreXY printer
Build Author 3D Meister Views 3989
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Jonathon Duerig Views 6183
Chrysalis: An Enclosure for TAZ 6 3d Printers
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
InDoreXY
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
Build Author Tomas F Uribe Views 4363
Atucnc
2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking
Build Author Karan Singh Sisodia Views 5253
My Home made CNC
Home Made CNC Router from Scrape
C Beam Served
C Beam Machine built in a server cab. Hopefully this keeps every thing enclosed , clean and quite ?
Build Author ZacharyB Views 4493
Arizona OpenBuilds MiniMill CNC
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
Plasma CNC, 4'6" × 8'8" v0318
A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.
Build Author Limine3D Views 3358
Shapeoko 1 upgrades
Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.
Voxel Evolution
This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.
Build Author Mark Carew Views 12468
NEMA 17 Belt and Pinion Actuator
This Belt and Pinion actuator is a great example of how easy it is to convert your machine into a belt drive system.
Build Author Mark Carew Views 5046
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author RobFromLDMS Views 3976
Lithgow Mens Shed CNC build
The tale of how we put together our CNC Router, and some of the difficulties encountered. It is now ready for final testing and commissioning.
Mammoth (Delta printer)
Massive Delta printer with a print area of 25 Inches (634mm).
Build Author DaleShaw Views 3415
Senior Project CNC table
So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..
Build Author Forestbird Originals Views 3814
Lead 1010 Build - Anything but stock.
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
Learning how to build
I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.
Build Author Frank Gore Views 7195
Kossel Extreme
A custom Delta printer for large projects with any filament that still retains speed and accuracy, all within a 15 amp/110VAC power budget. Based on Johann's Mini Kossel design.
THE BIG GREEN MACHINE
1500*1500*1900 (xyz) Biocomposite Pellet 3D printer
Build Author OpenBuilds Views 18074
BlackBox X32
The next level of CNC motion control solutions. Packed with advanced new features and built on the reliability of the proven BlackBox system
Build Author Bobnet Views 15250
Oversize ShapeOko as a 3D printer.
Converting a ShapeOKO into a 3D printer.
Linear Rotational Art.
One Linear Actuator covering two dimensions, WHAT!
Build Author Christer Langley Views 8492
CNC-Solutions Build
My first Build with V-slot
USB Pendant
An USB Pendant for LinuxCNC / Mach3
BotMaker
This is a work in progress 3D printer Dimensions are 230x230x340mm height. Print dimensions are: 135x135x160mm. Prototype has a bowden extruder with a J-head hotend. Assembly instructions: http://reprapstyle.blogspot.pt
Mendal Max 1.5 EX2 - a part of this, a part of that.
I like this design a lot. It's very stable, very strong and with the EX2 enhancements, it prints like a champ.
Build Author Kyo Views 9651
Fina
This is Fina; My Lautr3k inspired build.
3D Printer DELTA
Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed
Large Manual 3d Printer
This is the largest printer I have found. It is also the cheapest. The reason is that it is run by hand, without computer or motors or electronics. Put an object on one side and move the 3d pen while tracing the object. Move the z dimension by turning the crank on the lab jack to move the printed copy down a notch. Be creative!
My Little OX
This build has been an educational experience. Software and hardware alike.
XYZ Factory Bot
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
SUPER OX NEMA 34 1600 OZ Motors!!!
CNC OX 1500X3000
Build Author taratata2016 Views 6797
Panther 3D printer
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
Build Author Chetan PM Views 2988
Composer
Gantry style rigid build
Build Author Robert Huxford Views 2848
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Build Author Matt Barile Views 6153
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Build Author Anthony Castelluci Views 2503
Simple Camera Lofted Camera Slider
Build a manual camera slider.
Build Author bpatterson42 Views 2352
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Build Author hbtousa Views 2286
Quack Ball
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
Build Author Mark Carew Views 24347
OpenBuilds Workbee 1050 (40" x 20")
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 19528
C-Beam® XLarge Linear Actuator
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
Build Author Mark Carew Views 13418
C-Beam XLarge X/Y Table
This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!
Build Author Mark Carew Views 19032
V-Slot™ Nema 23 Linear Actuator (Belt Driven)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
Build Author Cortellini Views 4539
the Feedback Fractal project
The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.
Build Author Sir Bagels Views 2036
CNC Auto-pipette
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author mjenkins5720 Views 1937
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author Daniel Stewart Views 1140
Ultra sun cutter
A sun cutter only using mirror and glass balls with x and y table movement
Build Author Crazzy French Dude Views 3699
PeeNaPle_V1.4b
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
Build Author OpenBuilds Views 3361
Interface magnetic mount
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
big_recnc v2.0
cnc made with a 6mm metal body .
Build Author CONUCON Views 2897
3DTwinX Gantry CNC System
Belt driven 3-axis linear system for high precision and low costs. > Threading and linear real cutting needed
Build Author Bobnet Views 12076
Rackmount + OpenRail
OpenRail attached to a 19" rackmount 15U box.
Build Author Mohsen Abbasi Views 7595
Foldable Rainwater Collector
Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.
large format printer
I am hoping to post a detailed build of my printer it is a large format using the RepRap RAMPS 1.4 & Mega 2560 & DRV8825 Driver + optical end stop +LCD 12864 -C 0.4mm Far-end Distal Dual-Head Nozzle Extruder Double Nozzle
Build Author CWidt Views 7682
OpenBuilds CAndC - CNC Machine
A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.
McRouter 3 Axis CNC
I wanted to put together a medium size router using PTFE slides from McMaster-Carr. I've had great experience with these slides in long term continuous motion operations in industrial environments.
Build Author MikieLikesIt Views 7420
Cousin CNC OX Router
A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.
3D Printed Solid - Large Format Printer
I need a large build plate without spending 10-20k for a "store" built printer.
Build Author zann68 Views 7666
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.