Welcome to Our Community

Some features disabled for guests. Register Today.

Dash-X 3D Printer: Innovative design

May 21, 2019 at 3:00 PM
Category
Cartesian Style Bots
Build Progress
Build Complete!

Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.

KeePrint Monster

May 17, 2019
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Large 2 foot x 3 foot x 4.5 foot build volume Core XY printer build in process at this point. I am designing everything from scratch and using typincal parts bought from amazon for the build.

Mushu - Large Scale CoreXY

May 6, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.

Rostock TETRA V0

Nov 6, 2016
Category
Delta Bots
Build Progress
Build in Progress...

This is an experiment to build a Linear Delta Printer using four towers instead of three. Primary reasons: 1. Build area is roughly cubic vs roughly cylindrical 2. Greater speed and precision from additional control provided by fourth tower. 3. Symmetric kinematics from even number of towers.

crypt-cube

Apr 23, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.

CoreXY - e3d inspired

May 1, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.

Large 'Double H-Bot' using Openbuilds 2040 v-slot

Mar 17, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.

Coined by my family as the: Davomatic

Aug 12, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.

300mm Diameter, 1 Meter tall, Delta 3d Printer

Jan 14, 2018
Category
Delta Bots
Build Progress
Build Complete!

I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.

Double D-Bot 400mm x 400mm x 600mm

Feb 11, 2019
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.

TrueUp LZ

Apr 6, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A version of TrueUp using linear bearings/rods for the Z axis. This required enough modification to make a separate OpenBuilds project to avoid confusion for DIYers.

Lautr3k RepRap

Feb 12, 2015
Category
Cartesian Style Bots

A 3D printer without belts, a print volume of 320x320x260mm, obviously the V-Slot as linear guide! and a maximum of printed pieces.

SCoreXY

Dec 7, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.

C-Bot

Feb 21, 2019
Category
H-Bot and Core XY
Build Progress
Build Complete!

A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.

LCD Based SLA Resin Printer

May 3, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.

V-King CoreXY

Dec 12, 2018
Category
H-Bot and Core XY
Build Progress
Build Complete!

V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source

The Plastic Beast CoreXY Printer

Feb 28, 2018
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Affordable Cartesian Printer (Initial Design)

Sep 17, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This specific build page is a collection of screenshots sampling some of my initial SolidWorks design and pictures showing physical construction of the initial design. I will be creating individual build articles as I redesign, test, and implement new aspects of the printer.

Core-XY Cube

Sep 21, 2017
Category
H-Bot and Core XY
Build Progress
Build Complete!

An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'

LYNX - Huge 3D printer

Jan 14, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I'm basically building a larger version of my crappy wanhao 3d printer. My work was recycling some aluminium extrusion and it broke my heart to see such nice pieces of aluminium engineering being sent to a furnace. Mega 3d printer was born!

MakerSL MSL-5 Cantilevered 3D Printer

Jun 23, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

Emmett-Delta

Oct 21, 2016
Category
Delta Bots
Build Progress
Build in Progress...

Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.

Design and Performance Evaluation of A Large FDM 3D Printer

Nov 2, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This build includes the design of a large FDM 3D printer. This machine has a 796mm by 796mm by 900mm (LxWxH) build volume. Motion is controlled by servo motors and the printer runs on python-based marlin firmware.

BA3DP

Nov 1, 2018
Category
3D PRINTER BUILDS
Build Progress
Build Complete!

A slightly more than one half cubic meter 3D Printer using V Rails, V Rollers, "C" Rail, mounting plates, and a bunch of 3D printed brackets to provide strength and stability to the frame. Rigidity was the goal and precision and accuracy the result. The software is a whole other topic, many weeks spent dialing that in to make the printer print.

C3DO

Oct 31, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.

CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)

Mar 5, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.

Voxel OX with Helix Gear Z Transmission (single z motor)

Jun 4, 2018
Category
Cartesian Style Bots
Build Progress
Build Complete!

This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.

Indie i2

Aug 2, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

BinaryConstruct V3

Mar 2, 2018
Category
X/Y Table Style Bots
Build Progress
Build Complete!

This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.

Voxel Evolution

Jul 4, 2018
Category
Cartesian Style Bots
Build Progress
Build Complete!

This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.

1 Cubic Meter 3D Printer

Mar 20, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a at home built 1000mm x 1000mm x 1000mm 3d printer. It uses mainly parts from OpenBuild Parts and is very simple to build. The only thing that was custom was the build plate which was designed by myself and tooled at a local machine shop.

TrueUp Glide

Apr 14, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Unique Z

Nov 21, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet

ZideX

Feb 7, 2018
Category
Cartesian Style Bots
Build Progress
Build Complete!

3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.

OneZ i3

Apr 19, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.

Archer - An extendable all metal 3D printer

Jul 15, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.

(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in

Jan 12, 2018
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.

My first printer

Dec 13, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

My first printer! I went for a simple cartesian design, based on evilc66 one. It uses 1000 mm C-beam linear actuators. The build volume is 700x700x700 mm^3.

MQTitan printer

Jan 9, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Components- RAMPS, running marlin, Nema 17, All metal extruder, 600mm lead screws, 600mm 2020 aluminum extrusions, 12v 30a power supply, 12v LED strip, Typical endstops, 600mm 8mm linear rods, Bearing block for 8mm bearings, Openbuilds plates, wheels, and bearings, 500x500mm borosilicate glass plate

CoreXY - Tower Printer

Jan 5, 2018
Category
H-Bot and Core XY
Build Progress
Build Complete!

I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.

Core XY

Dec 10, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Just now in the planning phase of my build. Waiting for some parts to come in to see what I am going to build off of. Print area going to be close to 300x300x350. Trying to decide if I want it enclosed. I do want to print ABS... so probably so.

CubeSpawn Ultimaker 3D Printer Module

Sep 15, 2015
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker

ivern

Oct 28, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Toying around a concept. Inputs are welcome on whether to use lead screw or belt drive. My lead screw will be single start 500 mm lenght, 2 mm pitch and 2 mm lead. Nema 17 motors will be used. All veterans, suggestions please.

RSW's 3D Printer Build

Mar 15, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

I recently completed my C-Beam Plate Maker build ( http://www.openbuilds.com/builds/rsws-c-beam-build.4286/ ) and quickly got the build bug. I was looking for something to make with the new C-Beam and decided its time to venture into the 3D printer world. I can honestly say I have never been in the same room with a 3D printer, so this is going to be a learning experience. I spent some time browsing the 3D printer builds and finally decided to copy the Talos3D by AlexLee.

DIY Ultimaker

Nov 4, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.

Mini D-Bot

Oct 30, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice