Build List
-
Active Filters:
build
![V-Slot Ventilator](https://openbuilds.com/data/article_images/l/9/9309.jpg?t=1587332585)
Build Author
OpenBuilds
Views
5475
V-Slot Ventilator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
![BldrBot S2](https://openbuilds.com/data/article_images/l/0/632.jpg?t=1580431332)
Build Author
Keith Davis
Views
17919
BldrBot S2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Prusa i3 design running on Open Build's mini V wheels
OX-LX-3D
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX build - little large than specs and plates 3D printed
OX Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Standard OX Build
![Angus : A Slightly](https://openbuilds.com/data/article_images/l/1/1305.jpg?t=1415256336)
Build Author
Nugz
Views
12511
Angus : A Slightly "Beefier" OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
![YAOP (Yet Another Openbuilds Printer)](https://openbuilds.com/data/article_images/l/1/1493.jpg?t=1418414947)
Build Author
winand
Views
15619
YAOP (Yet Another Openbuilds Printer)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Yet Another Openbuilds Printer, my version :-P
![H-Bot CoreXY Cube with Fixed Build Plate](https://openbuilds.com/data/article_images/l/1/1985.jpg?t=1429646626)
Build Author
TomH
Views
15288
H-Bot CoreXY Cube with Fixed Build Plate
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Pure Cbeam 900x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
![DIY Flywheel Camera Slider](https://openbuilds.com/data/article_images/l/5/5181.jpg?t=1496883214)
Build Author
Beam
Views
9466
DIY Flywheel Camera Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My take on a non affordable slider.
1200X600 SPHINX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Need cnc to make alumunium sign, brass stamp, etc
![CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)](https://openbuilds.com/data/article_images/l/6/6421.jpg?t=1520257844)
Build Author
Nicademus
Views
8156
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
![Ooznest Ox CNC 1000 x 750](https://openbuilds.com/data/article_images/l/7/7029.jpg?t=1523991456)
Build Author
Kevr102
Views
4605
Ooznest Ox CNC 1000 x 750
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4938
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
![The Forever Project](https://openbuilds.com/data/article_images/l/7/7977.jpg?t=1543788838)
Build Author
Bikes and Beer
Views
3808
The Forever Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Workbee 1010 Lead Screw with water cooled spindle and enclosure
![Plywood Built CNC Router](https://openbuilds.com/data/article_images/l/8/8769.jpg?t=1567635339)
Build Author
Project Hopeless
Views
12959
Plywood Built CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.
Openbuilds CubeBot 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian type 3d printer build
Based on 608 tube Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Simple steel tube design Plasma water table
CNC China Router Conversion to Open Builds System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
![OpenBuilds Lead 1515](https://openbuilds.com/data/article_images/l/10/10293.jpg?t=1650393599)
Build Author
Shaun Weitzel
Views
4834
OpenBuilds Lead 1515
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First build of a Lead 1515!
![Optical Limit + Home Switches](https://openbuilds.com/data/article_images/l/0/512.jpg?t=1391894204)
Build Author
The Dude
Views
19222
Optical Limit + Home Switches
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
Guitar shop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Great bit of kit time will tell if it is up to the job
![V-Slot Modular Sit/Stand Desk](https://openbuilds.com/data/article_images/l/1/1615.jpg?t=1421190050)
Build Author
Mark Carew
Views
17459
V-Slot Modular Sit/Stand Desk
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Longhorn OX (Under Construction and In Progress)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.
![Persnickety Plate Maker](https://openbuilds.com/data/article_images/l/2/2454.jpg?t=1439488214)
Build Author
motopreserve
Views
8312
Persnickety Plate Maker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6696
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
![OpenBuilds C-Beam Double Slider](https://openbuilds.com/data/article_images/l/3/3462.jpg?t=1463761241)
Build Author
cbordeleau
Views
11575
OpenBuilds C-Beam Double Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
MY NEW CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build is not based on the ox, but got my ideas and inspiration from my first build,
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
BD's C-Beam Machine CNC Router (WIP)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC router table based on OpenBuilds C-Beam Machine bundle.
![Opening into doors](https://openbuilds.com/data/article_images/l/6/6336.jpg?t=1517233364)
Build Author
ShockingTops
Views
3539
Opening into doors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
![C-Beam - Sphinx 1000x1000mm inspired by Kyo](https://openbuilds.com/data/article_images/l/6/6611.jpg?t=1519313313)
Build Author
spark2
Views
4402
C-Beam - Sphinx 1000x1000mm inspired by Kyo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
![Arduino Grbl Laser CNC](https://openbuilds.com/data/article_images/l/7/7170.jpg?t=1527625247)
Build Author
jpjoshua
Views
10740
Arduino Grbl Laser CNC
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered Laser CNC using GRBl firmware.
LimpyCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
Brice's CNC Router Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.
![Wanhao Duplicator i3 Plus - Major rebuild.](https://openbuilds.com/data/article_images/l/8/8330.jpg?t=1550862847)
Build Author
John Pollman
Views
6061
Wanhao Duplicator i3 Plus - Major rebuild.
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Major rebuild of my Wanhao Duplicator i3 Plus.
![BD's Burn Box - ACRO Laser Engraver System](https://openbuilds.com/data/article_images/l/9/9010.jpg?t=1574574338)
Build Author
Bruce Walker
Views
5865
BD's Burn Box - ACRO Laser Engraver System
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
![Modified Sphinx 55 with MGN12 linear rails](https://openbuilds.com/data/article_images/l/9/9456.jpg?t=1596345440)
Build Author
Wes Dwight
Views
6074
Modified Sphinx 55 with MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
![OpenBuilds Enclosure Series](https://openbuilds.com/data/article_images/l/9/9535.jpg?t=1606859634)
Build Author
OpenBuilds
Views
25289
OpenBuilds Enclosure Series
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/314.jpg?t=1529428714)
Easy to build series of enclosures for all your CNC needs!
![V-Slot™ X -Y Stage Hidden Acme Rod Example](https://openbuilds.com/data/article_images/l/0/66.jpg?t=1389473440)
Build Author
Mark Carew
Views
51450
V-Slot™ X -Y Stage Hidden Acme Rod Example
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
![RoboFoamCutter](https://openbuilds.com/data/article_images/l/0/505.jpg?t=1391725995)
Build Author
Colin Russon
Views
7766
RoboFoamCutter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
![Aluminum Ox](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
richthorn
Views
7522
Aluminum Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
![First 3d build](https://openbuilds.com/data/article_images/l/1/1269.jpg?t=1418732417)
Build Author
jjcolletta
Views
10289
First 3d build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.
![My JGro CNC becomes an OpenBuild Project](https://openbuilds.com/data/article_images/l/1/1567.jpg?t=1420332689)
Build Author
Joey Selzler
Views
12025
My JGro CNC becomes an OpenBuild Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of my progression from the JGRO cnc router design to using the OpenBuild system. In the process I think I have learned some things about cnc routers and the accuracy required to make a good build.
![MUSK-OX](https://openbuilds.com/data/article_images/l/1/1706.jpg?t=1422401740)
Build Author
Larry_AK
Views
9279
MUSK-OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
![V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES](https://openbuilds.com/data/article_images/l/1/1949.jpg?t=1433097153)
Build Author
Darren Ditto
Views
9480
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
Custom OX Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!
Talos3D
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
In Greek mythology, Talos (/ˈteɪlɒs/;[1] Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
![Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)](https://openbuilds.com/data/article_images/l/3/3576.jpg?t=1466396648)
Build Author
Tim Pierce
Views
12519
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
![HD c Beam CNC Router](https://openbuilds.com/data/article_images/l/4/4455.jpg?t=1485947141)
Build Author
signzonepr
Views
11208
HD c Beam CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!
![Home built laser cutter](https://openbuilds.com/data/article_images/l/6/6159.jpg?t=1515545554)
Build Author
cory stafford
Views
3930
Home built laser cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is a laser cutter built with intent to use arduino as controller for a co2 cutting laser.
![Candler Customs - Custom CNC Machine](https://openbuilds.com/data/article_images/l/6/6234.jpg?t=1516136547)
Build Author
CandlerCustoms
Views
4078
Candler Customs - Custom CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
![Workbee](https://openbuilds.com/data/article_images/l/8/8114.jpg?t=1546590616)
Build Author
Christian James
Views
7444
Workbee "style" 1010 cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Indoor Drumline Props
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Triangular Towers
My Openbuilds Journey
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I've learned a lot from building this machine, and had and will continue to enjoy using it. Let The CHIPS FLY!
![LEGO BOX](https://openbuilds.com/data/article_images/l/10/10457.jpg?t=1687254602)
Build Author
Damian V-SLOT Poland
Views
2109
LEGO BOX
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers
![Micro Ox 2 x 2](https://openbuilds.com/data/article_images/l/1/1903.jpg?t=1426442709)
Build Author
Hytech2k
Views
6023
Micro Ox 2 x 2
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Micro Ox Build
![openbuilds rovo 1000mmx1000mm(rovo x)(korea)](https://openbuilds.com/data/article_images/l/2/2334.jpg?t=1435463917)
Build Author
inhan
Views
5180
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
![My Belt & Pinion Drive CNC Router](https://openbuilds.com/data/article_images/l/2/2512.jpg?t=1440728708)
Build Author
Justin Butler
Views
7569
My Belt & Pinion Drive CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
My first CNC - The C-Beam Basic
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am a newbie and this is my first build. After hours and hours of research I decided on the C-Beam. I will be changing one or two things but I will basically be building this as per Mark's video.
![M3D Squared](https://openbuilds.com/data/article_images/l/4/4583.jpg?t=1487205483)
Build Author
Limine3D
Views
7580
M3D Squared
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
![C-Beam Intro to CNC](https://openbuilds.com/data/article_images/l/4/4703.jpg?t=1490630165)
Build Author
Greg Lampman
Views
8166
C-Beam Intro to CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build log for my first CNC machine, a C-Beam Plate Maker
![1.4 meter tall build height, 300x410mm build plate cartesian](https://openbuilds.com/data/article_images/l/4/4797.jpg?t=1490545360)
Build Author
J-Wahl Dezign
Views
8257
1.4 meter tall build height, 300x410mm build plate cartesian
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
![Live C-Beam Build @ MRRF2018](https://openbuilds.com/data/article_images/l/6/6899.jpg?t=1521464284)
Build Author
obmilllivebuild
Views
4729
Live C-Beam Build @ MRRF2018
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
C-Beam Machine XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
V-rex , Low cost CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Easy to build,low-cost, CoreXY
Home made CNC Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.
Yet Another Ox Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build log will chronicle the construction of my oversize (1000mm X 1500mm) OX router.
Sketchup Design of a PVC CNC I Intend to build.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Build Start to begin Feb 1st.
MaxBox
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
![MIY OLY Delta Printer](https://openbuilds.com/data/article_images/l/2/2280.jpg?t=1443637173)
Build Author
KBill
Views
12259
MIY OLY Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mag arm deltabot with laser cut carriages and connectors.
![Kaarbble Nylon Bot](https://openbuilds.com/data/article_images/l/2/2787.jpg?t=1447151001)
Build Author
Kaarbble
Views
9500
Kaarbble Nylon Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
We plan experiment on nylon 3 D printing;
![Work Bench Stand](https://openbuilds.com/data/article_images/l/2/2801.jpg?t=1446126556)
Build Author
Mark Carew
Views
8166
Work Bench Stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Square OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
![Evil Ox](https://openbuilds.com/data/article_images/l/3/3328.jpg?t=1459106425)
Build Author
evil2002usna
Views
10485
Evil Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cheap Ballscrew Ox CNC Router.
![MakerSL MSL-7 Laser Cut Tape Dispenser](https://openbuilds.com/data/article_images/l/3/3368.jpg?t=1460023548)
Build Author
Sonny Lowe
Views
5018
MakerSL MSL-7 Laser Cut Tape Dispenser
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
My 1st C-Beam Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.
![10 x 5 ft plazma table build](https://openbuilds.com/data/article_images/l/3/3944.jpg?t=1473520223)
Build Author
Dave420
Views
13147
10 x 5 ft plazma table build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Attaching V Slot or mutable V Slot end on end to a larger steel frame table.
Openbuilds D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A humble first time attempt at building a 3d printer from scratch
![Budget 1500mm OpenBuilds V-Slot Deltabot Build](https://openbuilds.com/data/article_images/l/4/4396.jpg?t=1485280967)
Build Author
dodgenet
Views
5541
Budget 1500mm OpenBuilds V-Slot Deltabot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
![Atucnc](https://openbuilds.com/data/article_images/l/5/5003.jpg?t=1493777353)
Build Author
Tomas F Uribe
Views
4426
Atucnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking
MiniMill - A must have machine :)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The new MiniMill from Mark and Sonny is a great little machine.
First CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building my First CNC for PCB milling. Some modification done to the original build from OpenBuild Bundle.
![My Home made CNC](https://openbuilds.com/data/article_images/l/5/5274.jpg?t=1499417578)
Build Author
Karan Singh Sisodia
Views
5298
My Home made CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Home Made CNC Router from Scrape
Sphinx 1000 x 500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a Sphinx based CNC based on Kyo's plans. Going with a 1000 x 500 table size.
Stock CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!
Ooznest workbee
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is my first build so I will let you know how I get on
![Arizona OpenBuilds MiniMill CNC](https://openbuilds.com/data/article_images/l/6/6092.jpg?t=1514846826)
Build Author
ZacharyB
Views
4564
Arizona OpenBuilds MiniMill CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
Desktop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
![Modified Acro with build plate, Z-axis and OPT Laser](https://openbuilds.com/data/article_images/l/7/7331.jpg?t=1560557385)
Build Author
Todd Brous
Views
4332
Modified Acro with build plate, Z-axis and OPT Laser
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
![The Domino - 1.5m x 1m](https://openbuilds.com/data/article_images/l/7/7741.jpg?t=1540175917)
Build Author
Jones
Views
2937
The Domino - 1.5m x 1m
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
OX (Large) CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a Large OX CNC Open Build on a fold down table.
OoozNest WorkBee
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Journey on the WorkBee Build...
BKE Lead 1010 - First CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
LEAD CNC
Fully 3D Printed Small CNC Router/Plotter
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=1389472431)
3D Printed CNC machine. The build is on Thingiverse. https://www.thingiverse.com/thing:3842401 I posted it here to give props to the Openbuilds Control Software!
![Senior Project CNC table](https://openbuilds.com/data/article_images/l/9/9107.jpg?t=1578545546)
Build Author
DaleShaw
Views
3471
Senior Project CNC table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..
1250x1000 Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
Ox cnc improvements chain driven
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Just ox cnc experiment
Learning how to build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.
![Lead CNC 1010 Platform and Rotating Laptop Mount](https://openbuilds.com/data/article_images/l/9/9908.jpg?t=1619133278)
Build Author
ckgottabuild
Views
2717
Lead CNC 1010 Platform and Rotating Laptop Mount
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)