Build List
-
Active Filters:
k
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278375
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
253607
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
![OpenBuilds ACRO System](https://openbuilds.com/data/article_images/l/5/5416.jpg?t=1529678125)
Build Author
Mark Carew
Views
208271
OpenBuilds ACRO System
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/318.jpg?t=1529427874)
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138749
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![WorkBee CNC Machine](https://openbuilds.com/data/article_images/l/5/5626.jpg?t=1505419208)
Build Author
Ryan Lock
Views
124649
WorkBee CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
![V-Slot® NEMA 17 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/0/80.jpg?t=1444071466)
Build Author
Mark Carew
Views
120008
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
110186
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
![Prusa i3 Bear Upgrade V2](https://openbuilds.com/data/article_images/l/6/6428.jpg?t=1519671067)
Build Author
pek
Views
77552
Prusa i3 Bear Upgrade V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
77079
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
![BlackBox Motion Control System](https://openbuilds.com/data/article_images/l/8/8320.jpg?t=1568566381)
Build Author
Mark Carew
Views
74597
BlackBox Motion Control System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
![WorkBee CNC build - My honest opinion, tips and help](https://openbuilds.com/data/article_images/l/6/6407.jpg?t=1533433899)
Build Author
T4Concepts
Views
72243
WorkBee CNC build - My honest opinion, tips and help
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
![CNC xPRO Driver](https://openbuilds.com/data/article_images/l/0/643.jpg?t=1479952413)
Build Author
Spark Concepts
Views
71733
CNC xPRO Driver
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
![OpenBuilds Workbee 1010 (40](https://openbuilds.com/data/article_images/l/7/7198.jpg?t=1529023423)
Build Author
Mark Carew
Views
69007
OpenBuilds Workbee 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
Lautr3k RepRap
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A 3D printer without belts, a print volume of 320x320x260mm, obviously the V-Slot as linear guide! and a maximum of printed pieces.
![GridBot Two: Powerfully Simple](https://openbuilds.com/data/article_images/l/9/9144.jpg?t=1580061310)
Build Author
SOA
Views
58191
GridBot Two: Powerfully Simple
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.
![FARM OX (Four Axis Rotary Machine)](https://openbuilds.com/data/article_images/l/2/2415.jpg?t=1438353710)
Build Author
ymilord
Views
55100
FARM OX (Four Axis Rotary Machine)
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
![UK40OB](https://openbuilds.com/data/article_images/l/3/3988.jpg?t=1475587757)
Build Author
Ariel Yahni
Views
50650
UK40OB
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
![Core-XY Cube](https://openbuilds.com/data/article_images/l/3/3536.jpg?t=1465995594)
Build Author
alan richard
Views
45727
Core-XY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
![LINEAR RAIL SPHINX 55 (Blue OX plates)](https://openbuilds.com/data/article_images/l/9/9317.jpg?t=1588456683)
Build Author
that-jim
Views
41805
LINEAR RAIL SPHINX 55 (Blue OX plates)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Machine based on Sphinx 55 built with linear rails.
Charging Ox CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A heavily modified Ox CNC build to replace SO2.
![V-Slot Laser cutter and engraver](https://openbuilds.com/data/article_images/l/2/2617.jpg?t=1442812649)
Build Author
Yoshiya Arii
Views
39021
V-Slot Laser cutter and engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
36428
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
LEAD 1515, HGH15, SFU1604 Ball Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Project Completed.
![UltiBots CB3030 CNC Router](https://openbuilds.com/data/article_images/l/3/3597.jpg?t=1467332619)
Build Author
UltiBots
Views
34653
UltiBots CB3030 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
![Workbee CNC Router/Laser/Plotter](https://openbuilds.com/data/article_images/l/7/7966.jpg?t=1552235073)
Build Author
Leonard Cross
Views
33824
Workbee CNC Router/Laser/Plotter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
![Modular DIY CNC Machine](https://openbuilds.com/data/article_images/l/6/6140.jpg?t=1516590691)
Build Author
jtaggard
Views
32577
Modular DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
![K40 12x24in rebuild (In Original Case)](https://openbuilds.com/data/article_images/l/8/8287.jpg?t=1550170302)
Build Author
tshilling
Views
32323
K40 12x24in rebuild (In Original Case)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.
![3D Printer](https://openbuilds.com/data/article_images/l/0/225.jpg?t=1389473508)
Build Author
Cuong Vu
Views
31943
3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It took me 18 long nights to build it
![CNC Sand and Spraycalk drawmaschine](https://openbuilds.com/data/article_images/l/4/4792.jpg?t=1492879931)
Build Author
kallibaba
Views
31835
CNC Sand and Spraycalk drawmaschine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
31475
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
![Mini Kossel V-Slot 3D Printer](https://openbuilds.com/data/article_images/l/0/720.jpg?t=1401248501)
Build Author
UltiBots
Views
30853
Mini Kossel V-Slot 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29593
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
![High Z Mod for Lead CNC](https://openbuilds.com/data/article_images/l/8/8869.jpg?t=1570825850)
Build Author
Mark Carew
Views
29192
High Z Mod for Lead CNC
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
DIY Ultimaker
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.
![The Plastic Beast CoreXY Printer](https://openbuilds.com/data/article_images/l/6/6698.jpg?t=1519785516)
Build Author
cdsmith12
Views
25001
The Plastic Beast CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
In my opinion, this is the easiest and most complete tutorial to walk you through building a large platform 3D printer and the Sketchup File is included for you to make any changes needed.. The Plastic Beast is a CoreXY Printer with a build platform of 440mm square. You can print 600mm or about 23 inches diagonal. Any level of user from novice to expert should gain something from my tutorial.
![OpenBuilds Workbee 1050 (40](https://openbuilds.com/data/article_images/l/7/7199.jpg?t=1529026299)
Build Author
Mark Carew
Views
24503
OpenBuilds Workbee 1050 (40" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
![Prusa i3 Bear Half Upgrade v1.0](https://openbuilds.com/data/article_images/l/5/5661.jpg?t=1510508277)
Build Author
pek
Views
24502
Prusa i3 Bear Half Upgrade v1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2 / MK2s / MK2.5 3D printer
![K40 ACRO Conversion](https://openbuilds.com/data/article_images/l/6/6592.jpg?t=1519876442)
Build Author
joetemus
Views
24350
K40 ACRO Conversion
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
![SLA (Resin) 3D Printer](https://openbuilds.com/data/article_images/l/5/5069.jpg?t=1497077723)
Build Author
mytechno3d
Views
23639
SLA (Resin) 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
SLA LCD 3D Printer ( 8.9'' LCD screen )
![V-King CoreXY](https://openbuilds.com/data/article_images/l/7/7699.jpg?t=1539181070)
Build Author
Roy Berntsen
Views
23606
V-King CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
![INTERFACE CNC Touch Control System](https://openbuilds.com/data/article_images/l/9/9688.jpg?t=1608057066)
Build Author
OpenBuilds
Views
23127
INTERFACE CNC Touch Control System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Super cool standalone Human-Machine Interface for controlling your CNC machines!
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23085
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
OKMI 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
OKMI 3d Printer based on CoreXY
![Sphinx 55](https://openbuilds.com/data/article_images/l/9/9795.jpg?t=1612990846)
Build Author
Kyo
Views
22636
Sphinx 55
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
TrueUp Kit Version
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22168
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
![K40 C02 Laser Rail System](https://openbuilds.com/data/article_images/l/5/5270.jpg?t=1499547785)
Build Author
megashub
Views
21603
K40 C02 Laser Rail System
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter
![LS-LASER](https://openbuilds.com/data/article_images/l/7/7304.jpg?t=1532805578)
Build Author
LukasK
Views
21511
LS-LASER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
![C-Beam Rigid - 'The Hog'](https://openbuilds.com/data/article_images/l/3/3039.jpg?t=1493136162)
Build Author
ymilord
Views
21443
C-Beam Rigid - 'The Hog'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
![Sphinx rigid XL](https://openbuilds.com/data/article_images/l/4/4903.jpg?t=1492143643)
Build Author
Apothus
Views
20969
Sphinx rigid XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Rigid variant of the C-Beam sphinx platform
Laser Rotary Tool / Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Rotary attachment to engrave cylindrical objects on laser machines
OX Tale
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
![M3Delta](https://openbuilds.com/data/article_images/l/1/1022.jpg?t=1409236449)
Build Author
Limine3D
Views
20763
M3Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer designed in sketchup and includes an adjustable bed.
![(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in](https://openbuilds.com/data/article_images/l/6/6205.jpg?t=1515766125)
Build Author
nc3dpw
Views
20719
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
![Buffal-O-Tron](https://openbuilds.com/data/article_images/l/3/3371.jpg?t=1460335591)
Build Author
Paruk
Views
20288
Buffal-O-Tron
![](https://openbuilds.com/data/article_cat_images/s/0/298.jpg?t=0)
A 3D Scanning Station
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20201
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Vslot Kossel
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
19942
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
![Kossel 250 V-Slot](https://openbuilds.com/data/article_images/l/1/1058.jpg?t=1410219138)
Build Author
UltiBots
Views
19915
Kossel 250 V-Slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
![UltiFaker 2 Go](https://openbuilds.com/data/article_images/l/3/3141.jpg?t=1458585991)
Build Author
PaulS
Views
19455
UltiFaker 2 Go
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.
![V-Slot™ Nema 23 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/7/7821.jpg?t=1542037187)
Build Author
Mark Carew
Views
19431
V-Slot™ Nema 23 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
CubeFoot CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
![BlackBox X32](https://openbuilds.com/data/article_images/l/10/10381.jpg?t=1669208741)
Build Author
OpenBuilds
Views
18817
BlackBox X32
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The next level of CNC motion control solutions. Packed with advanced new features and built on the reliability of the proven BlackBox system
![CoreCube3D - A CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/8/8109.jpg?t=1546581339)
Build Author
CoreCube3D
Views
18793
CoreCube3D - A CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
![Spartacus Inspire](https://openbuilds.com/data/article_images/l/6/6670.jpg?t=1519708480)
Build Author
MarkM_NJ
Views
18645
Spartacus Inspire
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Plastic Monstrosity
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18175
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![C-Beam Lead Screw CNC Mountain](https://openbuilds.com/data/article_images/l/3/3947.jpg?t=1478950296)
Build Author
Savvas
Views
18158
C-Beam Lead Screw CNC Mountain
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
OX Fixed Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A simple fixed dust shoe for your OX.
![V-Slot Modular Sit/Stand Desk](https://openbuilds.com/data/article_images/l/1/1615.jpg?t=1421190050)
Build Author
Mark Carew
Views
17437
V-Slot Modular Sit/Stand Desk
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
![CNC FOR EVERYONE!](https://openbuilds.com/data/article_images/l/0/596.jpg?t=1399598080)
Build Author
John J Talavera
Views
17369
CNC FOR EVERYONE!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
kukatype 3d printer open source
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
im just starting and the size of this is 1.5 meter from base to end
HD CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy Duty build with 1605 Ballscrew and Linear Rail
Two color Drawmachine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
GRBL, vvvv, drawbot, penchanger, custom plates
Z-Axis for Laser Diode
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Custom Z Axis for OptLaser 6watt and the Acro System
Camera slider for stacking focus
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is just a small project to get use to the OpenBuild products.
3000x1500 CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16628
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
![The Beeline CNC](https://openbuilds.com/data/article_images/l/6/6656.jpg?t=1519854542)
Build Author
blterry1
Views
16494
The Beeline CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here are the instructions to build the Beeline custom CNC router table.
Prototype Rack-n-Pinion 4'x8'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a custom gear rack drive machine with a 4'x8' cut capacity.
DIY anodizing power supply
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
How to make your own anodizing power supply on a budget
![Co2 Laser Cutter/Engraver Rotary Attachment](https://openbuilds.com/data/article_images/l/8/8239.jpg?t=1549271771)
Build Author
pedrofernandez
Views
16111
Co2 Laser Cutter/Engraver Rotary Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
![Portable Diode Laser Cutter](https://openbuilds.com/data/article_images/l/3/3414.jpg?t=1543844434)
Build Author
Rob Taylor
Views
15966
Portable Diode Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.
![1000mm X 1500mm OX CNC -- Fiber/Garolite](https://openbuilds.com/data/article_images/l/1/1289.jpg?t=1414951188)
Build Author
SlyClockWerkz
Views
15737
1000mm X 1500mm OX CNC -- Fiber/Garolite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the full size OX.
Ox with Gecko Controller and CNC Linux
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Shawn's Workbee 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
Nox 1500mm x 1500mm C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
C-Beam build using a double C-Beam for the X axis. 1500mm x 1500mm
![Oversize ShapeOko as a 3D printer.](https://openbuilds.com/data/article_images/l/0/274.jpg?t=1395284238)
Build Author
Bobnet
Views
15311
Oversize ShapeOko as a 3D printer.
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Converting a ShapeOKO into a 3D printer.
![MDF Delta](https://openbuilds.com/data/article_images/l/0/692.jpg?t=1398125258)
Build Author
nicklogan
Views
15304
MDF Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
![1500x1000 CNC Router](https://openbuilds.com/data/article_images/l/9/9953.jpg?t=1621753109)
Build Author
Scott Drake
Views
15208
1500x1000 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1500x1000, additional frame stiffening from laser cut Stainless steel bracing plates, Nema 34 motor upgrade and Hiwin 16mm ballscrew additions on the way. Ethernet Smooth stepper control, 2.2kw Water cooled spindle. Schneider atv320 variable speed drive. SICK inductive limit switches, Leadshine Em882S stepper drivers ,1kw 62V supply for Stepper drives
![CNC Greenland Paddle Carver build](https://openbuilds.com/data/article_images/l/6/6221.jpg?t=1516031671)
Build Author
Andre Cooke
Views
15110
CNC Greenland Paddle Carver build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC mill for carving / milling Greenland Paddles
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15105
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![TZ C-Beam Machine Plate Maker](https://openbuilds.com/data/article_images/l/3/3122.jpg?t=1454887422)
Build Author
Teflon4
Views
14973
TZ C-Beam Machine Plate Maker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Modified and augmented Ooznest C-Beam Machine Plate Maker.
Some Improvements on the Workbee 1000x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Improvements both real and suggested for the Workbee assembly
![C-Beam Mini Mite](https://openbuilds.com/data/article_images/l/10/10001.jpg?t=1625194826)
Build Author
Rick 2.0
Views
14835
C-Beam Mini Mite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
14769
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
![RepRap Intro](https://openbuilds.com/data/article_images/l/3/3096.jpg?t=1454272289)
Build Author
Nwrgordon
Views
14535
RepRap Intro
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com
![Vox Solid State](https://openbuilds.com/data/article_images/l/6/6030.jpg?t=1513689971)
Build Author
CharlieShimota
Views
14369
Vox Solid State
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
BotMaker
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a work in progress 3D printer Dimensions are 230x230x340mm height. Print dimensions are: 135x135x160mm. Prototype has a bowden extruder with a J-head hotend. Assembly instructions: http://reprapstyle.blogspot.pt
![RONIN OX | The G10/Carbon Fiber Hogger](https://openbuilds.com/data/article_images/l/2/2876.jpg?t=1447906012)
Build Author
alex_b
Views
14204
RONIN OX | The G10/Carbon Fiber Hogger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)