Build List
-
Active Filters:
x
![CNC Router Lathe](https://openbuilds.com/data/article_images/l/2/2145.jpg?t=1466800036)
Build Author
Rakmup
Views
39580
CNC Router Lathe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
Somewhat Simple Lead screw conversion for an OX CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Somewhat Simple Lead screw conversion for an OX CNC.
Ox Stainless with ballscrews
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
![TZ C-Beam Machine Plate Maker](https://openbuilds.com/data/article_images/l/3/3122.jpg?t=1454887422)
Build Author
Teflon4
Views
14996
TZ C-Beam Machine Plate Maker
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Modified and augmented Ooznest C-Beam Machine Plate Maker.
![Gantry CNC - Decisions made only to change over and over.](https://openbuilds.com/data/article_images/l/6/6164.jpg?t=1515724331)
Build Author
GDanger117
Views
10367
Gantry CNC - Decisions made only to change over and over.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!
![Opening into doors](https://openbuilds.com/data/article_images/l/6/6336.jpg?t=1517233364)
Build Author
ShockingTops
Views
3565
Opening into doors
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
![Modular DIY CNC Machine](https://openbuilds.com/data/article_images/l/6/6140.jpg?t=1516590691)
Build Author
jtaggard
Views
32659
Modular DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
OX CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
The Nguni - an OX variant
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified OX with more X clearance, MDF plates, vacuum table
![Upgrading the C-Beam machine](https://openbuilds.com/data/article_images/l/3/3473.jpg?t=1464068790)
Build Author
Ronald van Arkel
Views
15345
Upgrading the C-Beam machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12948
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
Another (Mostly) Stock OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
For my first Openbuilds project, I decided to put together an OX CNC Router.
SkyKae sphinx - c beam xl hybrid
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I took what I thought were the best parts of the sphinx and the c beam xl to build a bigger and faster machine.
![Stainless OX Kit Build](https://openbuilds.com/data/article_images/l/5/5790.jpg?t=1511062628)
Build Author
Tucstrlly
Views
7793
Stainless OX Kit Build "Diamondback CNC"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
![CoreXY - Tower Printer](https://openbuilds.com/data/article_images/l/6/6126.jpg?t=1515197272)
Build Author
Terone Burgenheim
Views
5461
CoreXY - Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
MOJO 3D
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fast, Large build area, CoreXY design
Everything Else
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Hi my name is crispin and I'm an aluminum addict.
![C-Beam XL - TinyG - Aluminium Plate - Dewalt 611](https://openbuilds.com/data/article_images/l/4/4285.jpg?t=1485886261)
Build Author
jamesdjadams
Views
11228
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL build using TinyG V8.
Sphinx 1000 x 500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a Sphinx based CNC based on Kyo's plans. Going with a 1000 x 500 table size.
Another Sphinx - 1000mm x 750mm
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The reason for building this CNC is to help me in my guitar building hobby. (telecasters)
My 2nd cnc build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My new build to upgrade from my worn out shapeoko
Core XY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Just now in the planning phase of my build. Waiting for some parts to come in to see what I am going to build off of. Print area going to be close to 300x300x350. Trying to decide if I want it enclosed. I do want to print ABS... so probably so.
![Joe Harris's all metal CNC Router build](https://openbuilds.com/data/article_images/l/5/5982.jpg?t=1512418579)
Build Author
Joerharris
Views
5769
Joe Harris's all metal CNC Router build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!
Yet another Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here's my Sphinx with a few slight modifications.
![Small Portable PCB CNC Machine (CoreXY)](https://openbuilds.com/data/article_images/l/2/2311.jpg?t=1435185761)
Build Author
ymilord
Views
17471
Small Portable PCB CNC Machine (CoreXY)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.
![CubeSpawn Ultimaker 3D Printer Module](https://openbuilds.com/data/article_images/l/0/782.jpg?t=1401285394)
Build Author
CubeSpawn
Views
18448
CubeSpawn Ultimaker 3D Printer Module
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker
![ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile](https://openbuilds.com/data/article_images/l/2/2430.jpg?t=1439504766)
Build Author
zelos
Views
18030
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
![Kyoujin Mk1 (C-Beam /w Rack & Pinion)](https://openbuilds.com/data/article_images/l/3/3608.jpg?t=1466993307)
Build Author
ymilord
Views
11357
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
![CNC Laser](https://openbuilds.com/data/article_images/l/5/5791.jpg?t=1508877023)
Build Author
Karan Singh Sisodia
Views
7743
CNC Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
CoreXY based CNC Laser machine.
Mini D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.
C-Beam XL ( 1 meter²)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified C-Beam Build with a few Addons
OX CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.
The Frog: CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
C-Beam XXLarge "Laser "Tank""
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A re-imagining of Dollarz81's XXL Tank in Laser form
Nebraska 1246 x 1184
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first attempt at a CNC anything build
Pink Panther - MendelMax variant
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Taller and wider MendelMax 1.5 spinoff
4' by 2' Lasercutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
4foot by 2 foot, 10W El-Cheapo blue laser
Stargeezer Vertimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Next up will be the electronics package. My parts bins are overflowing with boards so this may be the hardest decision to make of the entire build.
Lead screw printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High quality e3d parts with a minimalist design
Printer number 2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A Large Printer that will hopefully be able to print at least 45cm cubed
Linear Rail derivative with ball screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
basic start to design of cnc machine
![Mobile bed cnc machine, first build](https://openbuilds.com/data/article_images/l/5/5584.jpg?t=1504802428)
Build Author
Jason Harding
Views
3188
Mobile bed cnc machine, first build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
Genesis XZ
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXZ implementation on 3d printer using Openbuild and RobotDigg parts.
![First 3d build](https://openbuilds.com/data/article_images/l/1/1269.jpg?t=1418732417)
Build Author
jjcolletta
Views
10304
First 3d build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.
![QuorXZ: A String-driven, Core XZ Printer](https://openbuilds.com/data/article_images/l/5/5489.jpg?t=1503869974)
Build Author
Scotty Orr
Views
9808
QuorXZ: A String-driven, Core XZ Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
The QuorXZ doesn't magically appear. It's gestation takes time, careful attention, and requires many parts. However, when it is ready, a magical, mechanical instrument is born....(and when you finally say its name, it sounds a little bit like "corks").
![Sphinx XL/R7](https://openbuilds.com/data/article_images/l/5/5224.jpg?t=1497737989)
Build Author
Hisha
Views
7943
Sphinx XL/R7
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A 1000mm x 1000mm Sphinx/R7 build.
First CoreXY Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
First CoreXY. Simple Square build, hopes for faster movements.
Core XY My-BOT 500 x 500 x 1000
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first construction after many years buys ready devices.
![C-Beam Intro to CNC](https://openbuilds.com/data/article_images/l/4/4703.jpg?t=1490630165)
Build Author
Greg Lampman
Views
8180
C-Beam Intro to CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Build log for my first CNC machine, a C-Beam Plate Maker
Custom Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Custom black and red Big Ox
![Delta-Six ( Jerry426 variant )](https://openbuilds.com/data/article_images/l/4/4005.jpg?t=1475265264)
Build Author
Martin Bogomolni
Views
10776
Delta-Six ( Jerry426 variant )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
Ooznest OX, Workbench, & Folding Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
InDoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
C-Beam Machine XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.
C beam xl
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I would recommend this challenge to any woodworker looking for something new.
![2020 First build.](https://openbuilds.com/data/article_images/l/4/4989.jpg?t=1500598962)
Build Author
THE LINK
Views
4296
2020 First build.
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Probably cheapest DIY build youl see.
![Batxillerat Research Project: Design and construction of a CNC](https://openbuilds.com/data/article_images/l/0/939.jpg?t=1410273484)
Build Author
Pol Feliu
Views
7733
Batxillerat Research Project: Design and construction of a CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm working on a cartesian cnc router for my school research project
![islahcnc&design](https://openbuilds.com/data/article_images/l/5/5278.jpg?t=1499502646)
Build Author
islahcnc
Views
3875
islahcnc&design
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I will post soon some more details.
![1500x1000mm Adjustable Height](https://openbuilds.com/data/article_images/l/5/5289.jpg?t=1499574114)
Build Author
JerryD
Views
4543
1500x1000mm Adjustable Height
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
![M Cubed CNC Mill](https://openbuilds.com/data/article_images/l/1/1634.jpg?t=1421382482)
Build Author
M^3
Views
20550
M Cubed CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A no-nonsense CNC mini mill to get the job done.
Delta-Six
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super rigid Delta printer, using 20X40 V-Slot
Arctic_Stingray CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
CNC Planning
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Reusing parts to build a CNC - planning stage
CORE XY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
Dixie C-Beam XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Build log of the Dixie C-Beam XL CNC Router.
![TazStiff](https://openbuilds.com/data/article_images/l/3/3043.jpg?t=1452132256)
Build Author
mirage335
Views
6504
TazStiff
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.
CoreXY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY cube with 600x600x800 volume.
![V-Slot SphereBot](https://openbuilds.com/data/article_images/l/0/57.jpg?t=1389473428)
Build Author
Mark Carew
Views
47440
V-Slot SphereBot
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
C-Beam based modular Resin Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The build is based on a 500mm C-Beam and the SeeMeCNC FlexVat. The C-Beam is both the linear motion and a structural element of the design. The frame that holds the 45 degree first surface mirror and the build vat can slide up and down the C-Beam to accommodate projectors with lenses at different elevations.
![RiNo Route](https://openbuilds.com/data/article_images/l/2/2577.jpg?t=1442333948)
Build Author
Steven Sampson
Views
9921
RiNo Route
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.
Schematix Ox-Metal Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
![1.4 meter tall build height, 300x410mm build plate cartesian](https://openbuilds.com/data/article_images/l/4/4797.jpg?t=1490545360)
Build Author
J-Wahl Dezign
Views
8264
1.4 meter tall build height, 300x410mm build plate cartesian
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
![OX with a Custom Electronics Case](https://openbuilds.com/data/article_images/l/3/3579.jpg?t=1466441316)
Build Author
eddyg
Views
4170
OX with a Custom Electronics Case
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Embarking on my first build and trying to start with a clean setup by creating an enclosure box for my controllers and power supply.
3D PrintBot 500x500x500
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large scale True 500x500x500 build volume 3D printer.
![Triple C-Bot](https://openbuilds.com/data/article_images/l/1/1757.jpg?t=1439584213)
Build Author
adamcooks
Views
42009
Triple C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
C-Beam XL build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So for a summary its a great kit that was easy to build, could not be more happy.
![Fixed Gantry Welded Steel Router](https://openbuilds.com/data/article_images/l/4/4776.jpg?t=1490226012)
Build Author
Matt Barile
Views
6227
Fixed Gantry Welded Steel Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
The Artist Formerly Known as Prints
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Work in progress large volume CoreXY printer
![Camera slider with rotation prototype](https://openbuilds.com/data/article_images/l/4/4808.jpg?t=1490778092)
Build Author
3D Meister
Views
4145
Camera slider with rotation prototype
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
OX Super "C" - Cpmpleted 11/02/16
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.
OX AI
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
![Need a catchy name - enlarging CNC](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
McAdam
Views
3062
Need a catchy name - enlarging CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts
Openbuilds D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A humble first time attempt at building a 3d printer from scratch
![High Intensity Dive Light](https://openbuilds.com/data/article_cat_images/l/0/295.jpg?t=0)
Build Author
Robert Huxford
Views
2909
High Intensity Dive Light
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
A work in progress
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
One of my first projects might be cutting proper plates.
![Server Rack Printer](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
Dmknerr
Views
4222
Server Rack Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.
![L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes](https://openbuilds.com/data/article_images/l/3/3496.jpg?t=1467382176)
Build Author
Anthony Bolgar
Views
10652
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
OnyX-13
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my OX. There are many like it, but this one is mine. My OX is my best friend. It is my life. I must master it as I must master my life.....
CoreXY Tower
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
![Routy GT2 290 BSX CNC Router, Low Cost and Good!](https://openbuilds.com/data/article_images/l/2/2434.jpg?t=1439915037)
Build Author
Ronald van Arkel
Views
32384
Routy GT2 290 BSX CNC Router, Low Cost and Good!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
![MULIMATERIAL 3D PRINTER (in progress)](https://openbuilds.com/data/article_images/l/3/3449.jpg?t=1463382525)
Build Author
Keteland
Views
9844
MULIMATERIAL 3D PRINTER (in progress)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Wifi'not
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple made hideaway for ugly electronics
Water Buffalo - Water jet cut OX+
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
3D printer inspired by the Bukito
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.
betterBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)