This is a totally original build of an od id grinder and thread grinder, I hope.

This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.

A mid-sized version of a Photogrammetry 3D Scanner.

Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.

A posi-drive leveling printer in 300x300x380mm format that easily breaks down for suitcase size shipping.

Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.

Massive Delta printer with a print area of 25 Inches (634mm).

A 200mm x 300mm x 200mm workhorse that never needs leveling due to Posi-Drive Leveling design.

Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

Cartesian type 3d printer build

I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.

This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.

The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.

Carbon fiber filament winder

Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds

C-beam machine mods.

This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.

Building a Phlat based CNC for MDF processing. Capacity of 48" x unlimited length.

I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.

So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.

A 1000 by 1000 CNC Router with linear rails and a control box.

How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.

Super solid core xy build inspired by the e3d tool changer

DIY design and build of a roughing 2' by 3.5' CNC router

How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.

Get organized with the SharkBits Holder!

Just ox cnc experiment

Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.

Tough 3D Printer using OpenBuilds Parts!

Getting more height out of the !510

This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.

I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.

My goals for this build were to eliminate slop and flex while also allowing easy serviceability.

A sun cutter only using mirror and glass balls with x and y table movement

This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.

2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community

The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.

Using the WorkBee to protect doctors against Corona virus.

I have the whole description and all the details in the "Body" section!

Mini Additive Manufacturing Printer by Chris Scholl

Modular and Scalable CoreXY Printer with all metal parts.

In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen

The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.

I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.

This is the build of a cartesian 3d printer made of an old Anet and Geeeteck, some 2020 alu profil and linear rail. Powered by a Rumba with a Nextion screen. It should be modular and accept dual Extrusion and laser engraving.

Cartesian style CNC with a working area of around 360mm x 360mm x 120 mm (X, Y, Z) using Linear rails and ball screws. The linear rails are (Hiwin?) HGR 20mm x 520mm and the ball screws are SFU1204 (12mm lead 4mm) of around +/- 430 mm. The base structure is made from rectangular aluminum profiles of 70mm x 45mm x 3mm (thickness of walls).

V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.

PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1

China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“

A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.

Stabilus 3d Large Format Printer Kit

This is basically a Sphinx variant with few changes of my own...hope it'll work.

Functional real-world 3D printer build with RM2-2RS bearings in routed V grooves on phenolic resin rails (lab countertop scraps) and NSK 25mm linear rails/trucks.

Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way

A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.

WorkBee1510 with retractable space saving stand and customize build Marlin firmware and MarlinPanel (GCode Sender/UI)

Build Summary updated after parts list completed

This is a build for those of us that want to work fairly large but are in a tight space and budget

Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller

Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40

Building a printer that can fit inside and operate at ~200 C oven temperatures

Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood

My cnc update and rebuild.

1000mm x 1000mm linear rails, double gantry, build in Process... more to come

Very cheap CNC made from laser fired and bent parts.

Another Cartesian style build with parts from the UK, US & China.

A cabinet to keep a constant temperature for pizza or bread mother dough to grow.

Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.

Prusa mini inspired 3d printer

All metal CoreXY 3D Printer Design with triple z, kinematic bed, and scalable corexy mechanism.

Lead1010 build

Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.

Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.

I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...

This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.

We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.

A six axis camera slider with a 7th LIFT axis added!

Hopefully an upgrade of the Z axis of the Workbee.

First build of a Lead 1515!

I designed this 3D printer from scratch for my mechanical engineering capstone project. It's made for printing clay but should be able to print any paste material. The clay extruder system could be easily modified to work with almost any 3D printer. The printer is approximately the same size as an Ender 3.

Rubber company use as a lathe cutter for accurate cuts compared to hand cutting.

I made this from A to Z at home by myself with reading and watching tones of videos. 50 cm X 50 cm but I get 40cm x 35 cm as a real workread

Has a 700 by 700 cutting area and is very stable

lead machine plasma table with Black Box, and Torch Height Control

1500*1500*1900 (xyz) Biocomposite Pellet 3D printer

my first cnc build using the lead 1010 to build bigger and better!!

OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD

The next level of CNC motion control solutions. Packed with advanced new features and built on the reliability of the proven BlackBox system

i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.

We are introducing the Cairo30 3d-printer! It’s our new premium creature with no compromises! The Cairo30 3d-printer is the culmination of our accumulated years of experience designing and producing open-source CNC machines kits.

My Minimill hit the gym, and isn't so mini anymore

I have not too much space and need a portable solution, and tired of cleaning the electronics I decide to put everything inside a box and this is the result.

A Sphinx Linear rail build (600mm x 600mm) hence the title Sphinx66. Plates supplied by Chris Laidlaw. Linear rails used MGN15

Low cost cnc linear drive for making any xyz cnc structure

CNC SPINDLE FOR DIY ROUTERS AND MILLING MACHINES ITSRS-985 MOTOR HAS MUCH BEFINITS THAN ANY OTHER DC MOTOR IN MARKET

Belt driven 3-axis linear system for high precision and low costs. > Threading and linear real cutting needed

It's a Z floating head idea. Works well. Recommend cleaning the inside of your holes well with Q tips, and polishing the 1/4-20 bolts with car wax and you won't need oil as it slides perfectly. Hope this helps

Hello. I build this 600 by 600 printer and hope to share it. I plan to sell custom builds with my website in the middle of this yeahr while making all parts accesibble online for replacements and own builds. My plan was to build a better and more accessible big volume 3d-printer as cheap as possible. I got some inspiration of the ender creality 3, the crazy-Print xyz 300 and the veho 600 tronxy which was simply not relaible and satisfying overal.

This is my version of the OpenBuilds ACRO System CNC, a 1010 version (1000mm x 1000mm). I need this machine to build PCB prototypes within 2-days at maximum. I will try to build PCBs using drill and laser methods...