Build List
-
Active Filters:
a
![Router Sled V1.1 V-SLOT](https://openbuilds.com/data/article_images/l/9/9608.jpg?t=1603723779)
Build Author
Damian V-SLOT Poland
Views
11333
Router Sled V1.1 V-SLOT
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)
![Swing Arm](https://openbuilds.com/data/article_images/l/9/9678.jpg?t=1607385200)
Build Author
OpenBuilds
Views
9114
Swing Arm
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way
![Laser Rotary Attachment](https://openbuilds.com/data/article_images/l/9/9724.jpg?t=1619880876)
Build Author
boutrous
Views
7613
Laser Rotary Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Build Summary updated after parts list completed
![Cairo Mini 3d-Printer](https://openbuilds.com/data/article_images/l/10/10264.jpg?t=1655433922)
Build Author
Ahmed Ibrahim
Views
6795
Cairo Mini 3d-Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.
My ACRO Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
An ACRO laser put together with some repurposed and some new parts.
![V-Slot® NEMA 17 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/0/80.jpg?t=1444071466)
Build Author
Mark Carew
Views
120312
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Richrap 3DR Mashup
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A work in progress. working to refine the print head/carriage to integrate a bed level probe directly into the print head.
![CNC FOR EVERYONE!](https://openbuilds.com/data/article_images/l/0/596.jpg?t=1399598080)
Build Author
John J Talavera
Views
17397
CNC FOR EVERYONE!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Ox with Gecko Controller and CNC Linux
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
![M3Delta](https://openbuilds.com/data/article_images/l/1/1022.jpg?t=1409236449)
Build Author
Limine3D
Views
20789
M3Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer designed in sketchup and includes an adjustable bed.
DIY anodizing power supply
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
How to make your own anodizing power supply on a budget
![openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)](https://openbuilds.com/data/article_images/l/1/1657.jpg?t=1422099227)
Build Author
openhardwarecoza
Views
27148
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
![Prusa i3 (Acrylic frame with OB rods)](https://openbuilds.com/data/article_images/l/1/1739.jpg?t=1423287009)
Build Author
dddman
Views
12786
Prusa i3 (Acrylic frame with OB rods)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr (source: http://reprap.org/wiki/Prusa_i3)
My Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
What I want to build is a unit to: rout wood, plastic and occasional aluminium . to be able to swap cutters. i.e. drragknife, laser, router, drill
CNC Router (Non OX)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My own Design (not an OX Derivative) using standard Parts.
C-beam Router rack and pinion
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm
![OX-SUMO, SUMO-OX, OXSUMO?](https://openbuilds.com/data/article_images/l/2/2811.jpg?t=1446693241)
Build Author
evildean
Views
8019
OX-SUMO, SUMO-OX, OXSUMO?
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Steel Frame 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A steel framed 3D printer using a similar design with my CNC Router.
![Emmett-Delta](https://openbuilds.com/data/article_images/l/3/3052.jpg?t=1452293030)
Build Author
David Bunch
Views
13714
Emmett-Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.
Dust Boot and Holddown in one
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
only 2 screws to hold down even bent sheet material and vaccum dust removal in one
![OX / X3 CNC / Similar Z axis / 1605 Linear Actuator](https://openbuilds.com/data/article_images/l/3/3265.jpg?t=1457964143)
Build Author
Colin Russon
Views
8215
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Z axes 1605 ballscrew, a comparative design proposal.
![Pong CNC](https://openbuilds.com/data/article_images/l/3/3425.jpg?t=1462357169)
Build Author
Gerrald
Views
4806
Pong CNC
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
![L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes](https://openbuilds.com/data/article_images/l/3/3496.jpg?t=1467382176)
Build Author
Anthony Bolgar
Views
10661
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Laser cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
In the expo projects during the second year of engineering students. the project group who made this rapport made a laser cutter for the students of Fontys Hogeschool Engineering to use this machine for creating parts for their projects. The goal of Project Laser Cutter is to build a laser cutter, which is safe and can be used within the school. Also it has to be able to cut through 10 millimetres thick acrylic material or 10 millimetres thick plywood. This project will follow the V-model. This
Archivist Quill Book Scanner
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
MiniMill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a small mill to match my 7x12 lathe.
![3d nika](https://openbuilds.com/data/article_images/l/3/3663.jpg?t=1467561272)
Build Author
griso
Views
8149
3d nika
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
Update for my 3D Printer - Big Size
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
I like combo machines, so I upgrade my 3D Printer with a Laser. It is a double head combination. The Laser is easy removable.
CoreXY Cubish
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
![DSLR ( video ) motorized slider](https://openbuilds.com/data/article_images/l/3/3869.jpg?t=1471675578)
Build Author
mytechno3d
Views
5718
DSLR ( video ) motorized slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
In order to make some nice traveling video you need a slider .
CrOX Carbon Reinforced OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Modified OX with carbon fiber reinforced X and Z axes. 1500mm Y, 1000mm X and 120mm Z clearence
blackcat3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......
![Hobby OX CNC](https://openbuilds.com/data/article_images/l/4/4058.jpg?t=1477275820)
Build Author
Krishnakumar
Views
7380
Hobby OX CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!
![Alice Clementine](https://openbuilds.com/data/article_images/l/4/4073.jpg?t=1487002552)
Build Author
Jose A. Molina
Views
6199
Alice Clementine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Roberta Clementine's first daughter printer Alice Clementine!
Mandarin-Bot :)
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Another slight variation of Niko's Eggbot using Openbuilds V-slot and other 3d printed parts.
Stainless OX kit
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
![LinearRail - 3D Printer](https://openbuilds.com/data/article_images/l/4/4307.jpg?t=1484074037)
Build Author
sgspenceley
Views
6589
LinearRail - 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.
![CNC Control Box with VFD etc etc](https://openbuilds.com/data/article_images/l/4/4354.jpg?t=1486815770)
Build Author
Savvas
Views
16617
CNC Control Box with VFD etc etc
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
2 GANTRY CNC HOTWIRE MACHINE
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A 2 independent gantry affordable hotwire machine.
Triangular CNC Milling Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A wonky build to eliminate slop on a long Z axis
ZANTRY CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC Based on CBeam, with No custom Plates, and Z GANTRY
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11065
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
Skyggen 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.
![Stainless OX Kit Build](https://openbuilds.com/data/article_images/l/5/5790.jpg?t=1511062628)
Build Author
Tucstrlly
Views
7807
Stainless OX Kit Build "Diamondback CNC"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
![Plate Maker V-slot Table](https://openbuilds.com/data/article_images/l/5/5876.jpg?t=1510340593)
Build Author
Kyo
Views
8558
Plate Maker V-slot Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
![777 CNC Build](https://openbuilds.com/data/article_images/l/5/5922.jpg?t=1511205855)
Build Author
patdee
Views
3962
777 CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"
80watt Lasercutter, workingarea 105x52[cm], steel frame
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I will write a short buildlog here with mostly pictures. I designed this lasercutter in solidworks(not totally finished) for a good overview and such that the steel tubes could be lasercut by a company, the metal frame is based on the lasercutter the KÄSER, which you can find on cnczone.nl. The mechical parts are designed by myself because I had no mill to my use, so the mechnical parts are lasercut(same company as tube) steelplates welded together.
![DaveP's Homemade CNC Project](https://openbuilds.com/data/article_images/l/6/6123.jpg?t=1515195329)
Build Author
Dave Pyatt
Views
3694
DaveP's Homemade CNC Project
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
15011
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
ORCA Laser Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is my take on the Acro Laser system made from mostly salvaged, scrap, or leftover parts. I modified the plates in an attempt to maximize the cutting area and I wanted a lightweight adjustable Z axis.
![OP C-Beam Machine XL by ChrisViral](https://openbuilds.com/data/article_images/l/7/7190.jpg?t=1528829194)
Build Author
ChrisViral
Views
5852
OP C-Beam Machine XL by ChrisViral
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
WorkBee 1510 - First CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Openbuilds 1050 Sphinx. Thank you to Mark Carew for trading me a set of plates for a spindle and PSU I was not using. Mark is a champ!
![Delta250](https://openbuilds.com/data/article_images/l/7/7930.jpg?t=1543525836)
Build Author
thinman
Views
7353
Delta250
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A 250x250 mm Delta Printer utilizing a Duet Wifi controller and a Titan Aero direct drive extruder.
Large 3D Printer 5ft by 5ft print bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
New ultra large 3D Printer design. I'm calling it the AutoCrafter
OpenBuilds LEAD Machine 1010 40" x 40"
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Openbuilds LEAD machine 1010 build
![OB 2x72 Belt Grinder](https://openbuilds.com/data/article_images/l/8/8421.jpg?t=1554164244)
Build Author
Ariel Yahni
Views
5373
OB 2x72 Belt Grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Open source large format CNC-machine and 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
![The FEEDBACK FRACTAL Build](https://openbuilds.com/data/article_images/l/8/8518.jpg?t=1557431974)
Build Author
Cortellini
Views
3286
The FEEDBACK FRACTAL Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
![USB Hot Wire CNC Foam Cutter](https://openbuilds.com/data/article_images/l/8/8770.jpg?t=1566283532)
Build Author
rcKeith
Views
6174
USB Hot Wire CNC Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
Rotary Axis for Laser Engraver/Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.
![Rack and Pinion Cartesian Mill](https://openbuilds.com/data/article_images/l/9/9020.jpg?t=1576955758)
Build Author
Joe F
Views
7000
Rack and Pinion Cartesian Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
![Dual Extruders 3D Printer - Zidex Upgraded](https://openbuilds.com/data/article_images/l/9/9102.jpg?t=1578282133)
Build Author
David Florian
Views
8643
Dual Extruders 3D Printer - Zidex Upgraded
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Z Axis for ACRO
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to accommodate various thicknesses of material, without having to manually loosen screws to adjust. Also wanted to be able to vary the height for multiple cutting passes on some materials. Try to stick to a similar aesthetic as the original ACRO system and plates.
Massive Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
CNC Hot Wire Foam Cutter. Lathe, Turntable and 4 axis Cutter. Can cut XPS and EPS.
Bored in the garage enclosure build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
![V-Slot Ventilator](https://openbuilds.com/data/article_images/l/9/9309.jpg?t=1587332585)
Build Author
OpenBuilds
Views
5497
V-Slot Ventilator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
![DIY Slab Flattening Mill](https://openbuilds.com/data/article_images/l/9/9396.jpg?t=1593609079)
Build Author
Damian V-SLOT Poland
Views
14208
DIY Slab Flattening Mill
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.
(Smaug) 100w 1500x1000mm CNC Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.
LEAD 710 with High Z mod
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Overview of a 700mm x 1000mm machine based on the LEAD design and with the High Z mod from the start. Will have a parts list you can use to build yourself if you like the formfactor
![Multi Z LEAD Machine Addon](https://openbuilds.com/data/article_images/l/10/10399.jpg?t=1672262763)
Build Author
OpenBuilds
Views
3440
Multi Z LEAD Machine Addon
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/314.jpg?t=1529428714)
The Multi Z adds multiple Z axis to a LEAD CNC Machine allowing it to cut and carve 2 to 3 times the amount of projects in the tame it takes to make just one
Tweakie's De-Mag.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A little project for a rainy day which some, like me, may find useful.
![BldrBot S2](https://openbuilds.com/data/article_images/l/0/632.jpg?t=1580431332)
Build Author
Keith Davis
Views
17963
BldrBot S2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Prusa i3 design running on Open Build's mini V wheels
Vslot Kossel
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR
Long Ox with drop in table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.
![OS OX](https://openbuilds.com/data/article_images/l/1/1106.jpg?t=1415853111)
Build Author
Rural
Views
21038
OS OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Mechanically, a scaled up OX build (1500x1500). Electronically, GRBL on an Arduino and a gShield. From a software perspective, the focus is on useable open source software tool chains.
![Angus : A Slightly](https://openbuilds.com/data/article_images/l/1/1305.jpg?t=1415256336)
Build Author
Nugz
Views
12525
Angus : A Slightly "Beefier" OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
![YAOP (Yet Another Openbuilds Printer)](https://openbuilds.com/data/article_images/l/1/1493.jpg?t=1418414947)
Build Author
winand
Views
15645
YAOP (Yet Another Openbuilds Printer)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Yet Another Openbuilds Printer, my version :-P
OX Fixed Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A simple fixed dust shoe for your OX.
![(R)OX CNC [FR/EN]](https://openbuilds.com/data/article_images/l/1/1584.jpg?t=1423259127)
Build Author
AndersFaust
Views
11153
(R)OX CNC [FR/EN]
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another (R)OX CNC something like build, in French please ! Pics Heavy !
PROTODERA 5-axis CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.
![OX Cable Management, Electronics Case, E-Stops](https://openbuilds.com/data/article_images/l/1/1810.jpg?t=1424407342)
Build Author
andrew Adsit
Views
12796
OX Cable Management, Electronics Case, E-Stops
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
750mm x 750mm OX build, xPro V2 controller, 400W Spindle with PWM controller.
Adamantine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is Adamantine, a all aluminum lead screw driven 3d printer. I wanted to have a printer that would not be effected by the heat or humidity I have here as my current wood frame printer is.
Delta 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I am going to use this as a build log for my delta 3d printer build. I have access to a MakerBOT to print some of the parts. I am still finishing up a few of the design elements but the idea is to have a rigid unit to eliminate deflection in components and maintain accuracy.
![H-Bot CoreXY Cube with Fixed Build Plate](https://openbuilds.com/data/article_images/l/1/1985.jpg?t=1429646626)
Build Author
TomH
Views
15320
H-Bot CoreXY Cube with Fixed Build Plate
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Screaming Ox CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Big brother of the Charging Ox CNC machine.
![V-Slot Cutting System](https://openbuilds.com/data/article_images/l/2/2138.jpg?t=1431475871)
Build Author
Kyo
Views
11251
V-Slot Cutting System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Water Buffalo - Water jet cut OX+
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
![FRANKINATOR -- My CNC Router Built Around The C-Beam Rail](https://openbuilds.com/data/article_images/l/2/2370.jpg?t=1454334800)
Build Author
Robert Bailey
Views
28174
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
![ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile](https://openbuilds.com/data/article_images/l/2/2430.jpg?t=1439504766)
Build Author
zelos
Views
18035
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
![RiNo Route](https://openbuilds.com/data/article_images/l/2/2577.jpg?t=1442333948)
Build Author
Steven Sampson
Views
9925
RiNo Route
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
![Tesseract](https://openbuilds.com/data/article_images/l/2/2791.jpg?t=1445528517)
Build Author
JCPhlux
Views
24356
Tesseract
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large Core XY 3d Printer W/fixed build plate
C-Beam Machine Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Short description of my assembly and use of the C-Beam bundle from the Open Builds Part Store.
![OpenBuilds C-beam 15mm belt on 1500mm C-Beam.](https://openbuilds.com/data/article_images/l/3/3457.jpg?t=1463622960)
Build Author
Dave420
Views
13136
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
![C-Beam Prototype](https://openbuilds.com/data/article_images/l/3/3654.jpg?t=1467492770)
Build Author
Rwetzler
Views
8073
C-Beam Prototype
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Watercooled 3D printer : Maximus Evo Rev 2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Watercooled 3D printer
TesseractXY (MendelMax 1.5 version)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
History about making 3d printer.
Spindle cooling setup
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Cooling system for water cooled spindle.
Pure Cbeam 900x1000
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
![SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer](https://openbuilds.com/data/article_images/l/4/4275.jpg?t=1483369813)
Build Author
Venturebit
Views
10593
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)