Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    tr

CNC ESS Controls System

Jan 22, 2019
Category
Everything Else
Build Progress
Build in Progress...

My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.

Plasma CNC machine

Jan 17, 2020
Category
LASER - PLASMA BUILDS
Build Progress
Build in Progress...

The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.

Lead 1010 Build - Anything but stock.

Feb 24, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.

777 CNC Build

Nov 29, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

To begin the "Build" I have ordered a few parts from OpenBuilds to get started. They are arriving today; according to "tracking". I cant wait! Praise Jesus! This 85 yr old man is getting a "New " life. Hallelujah and amen. Because I am building this on an existing machine, I have to be careful; so I will order some parts then see what I don't need (such as a base); along with parts that I may need to adapt it to the machine. It should be fun! "Caint wait!"

20x24 inch Fixed Gantry Mill

Mar 25, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I have shared many pictures of this project it is now complete I have had my first cuts on this machine and it is solid , still learning the new motion Controller. The Acorn is more like you would find on a commercial built CNC or CNC Lathe.But it does have all of the functionally one needs

DaveP's Homemade CNC Project

Feb 7, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...

OTiS 500mm

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.

DutziDelta RepStrap

Nov 2, 2015
Category
Delta Bots
Build Progress
Build in Progress...

Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.

Opening into doors

Jan 29, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.

A custom arcade

Jun 19, 2020
Category
Furniture Builds
Build Progress
Build Complete!

This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.

Unique Z

Nov 21, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet

32 Button Hand Pendant for the PlanetCNC Control Board

Feb 24, 2018
Category
Circuit - Software Project
Build Progress
Build Complete!

This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.

All metal Ox hybrid CNC Router Table

Feb 19, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my second CNC build, but the first one that I design from the ground up. The base is all metal because I want to add Plasma facility later on. I used the Ox model for the gantry plates and made a few changes to adapt to my design. Since I wanted to use parts from my first CNC to save as much as possible, I kept the 5/8 Hi-Lead Screw I had from Roton for the Y and Z axis. I will also add a downdraft table to keep all parts tight on the table for cutting.

Fully 3D Printed Small CNC Router/Plotter

Nov 8, 2019
Category
DRAWBOT/ARTBOT BUILDS
Build Progress
Build Complete!

3D Printed CNC machine. The build is on Thingiverse. https://www.thingiverse.com/thing:3842401 I posted it here to give props to the Openbuilds Control Software!

Mobile bed cnc machine, first build

Sep 12, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.

C-Beam Upgrade to Larger C-Beam

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!

MQTitan printer

Jan 9, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Components- RAMPS, running marlin, Nema 17, All metal extruder, 600mm lead screws, 600mm 2020 aluminum extrusions, 12v 30a power supply, 12v LED strip, Typical endstops, 600mm 8mm linear rods, Bearing block for 8mm bearings, Openbuilds plates, wheels, and bearings, 500x500mm borosilicate glass plate

Ball Trajectory Machine

Nov 23, 2018
Category
Everything Else
Build Progress
Build Complete!

Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.

Sherline C-Beam with Offline Controller and MPG

Nov 23, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.

Modular Controller PCBs

Sep 3, 2017
Category
Circuit - Software Project
Build Progress
Build in Progress...

This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.

Nightfuel

Feb 4, 2018
Category
Everything Else
Build Progress
Build in Progress...

The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.

ALl included interface

Apr 8, 2023
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

I have not too much space and need a portable solution, and tired of cleaning the electronics I decide to put everything inside a box and this is the result.

Bedroom Builds (BrB) DIY CNC

Jan 12, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

So I am employed in the automotive industry and I walk by thousands of dollars of CNC products daily that are no use to me due to being a Technologist and not a machinist. So therefore with some research I found openbuilds and their great selection of products to build my own CNC. This CNC will consist of 4 axis one removable 360 degree axis for turning alongside a x axis table Y axis stationary gantry and a Z axis attracted to the Y axis linear actuator.

Screen Mesh Stretching

Nov 10, 2017
Category
Everything Else
Build Progress
Build in Progress...

The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.

Bee the Boss

Jun 2, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.

Design and Performance Evaluation of A Large FDM 3D Printer

Nov 2, 2018
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This build includes the design of a large FDM 3D printer. This machine has a 796mm by 796mm by 900mm (LxWxH) build volume. Motion is controlled by servo motors and the printer runs on python-based marlin firmware.

Model train lift - scale HO

Mar 12, 2020
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.

My CNC

Jan 5, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

First build - small scale

Jan 9, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Using basic standard components, beams, motors, belt drive on x and y, z is a screw. Using Grbl Panel on Windows 10. Really basic router, had trouble getting the controller to turn on the router and set speeds so it is currently wired to a power bar switch so it runs full speed and I just use the switch to turn it on and off. Just getting x, y and z control working properly for now and likely going to switch the router to my dremel 4000 using a 3d printed mounting bracket I got from thingiverse

One more life for a cube

Feb 4, 2018
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.

Mighty Chihuahua

Oct 26, 2020
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice