Welcome to Our Community

Some features disabled for guests. Register Today.

  1. Hello fellow builders,

    Welcome to OpenBuilds!
    D r e a m  i t  -  B u i l d  i t  -  S h a r e  i t

     Be Sure to Log in to Gain Access to all of the Exciting Features 
    Openbuilds.com is the place to go for open source builds, projects and resources.

    What will you build?

    -This message will self-destruct once you are logged in
    Dismiss Notice

Cartesian Style CNC

    • Featured Builds

  1. OpenBuilds OX CNC Machine
    OpenBuilds OX CNC Machine
    44
    148
    1082660

OTiS 500mm

Feb 28, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

OTiS (Off The Shelf) is 500mm cartesian CNC that can be built with all off the shelf parts from OpenBuildsStore. It features C-Beam actuators and a V-Slot frame.

C-Beam - Sphinx 1000x1000mm inspired by Kyo

Feb 23, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.

C-Beam 1M

Sep 4, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Basing this build on the C-Beam machine XL on the parts store, but added a few things to make it more like the C-Beam XXLarge "Tank" by Dollarz81. Going with the Dewalt 611 instead of a water cooled spindle at first. May change down the road. Using a Panucat Gradus M1 controller with BigFoot drivers.

DaveP's Homemade CNC Project

Feb 7, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Somewhere along the line sometime around February 2017 I got the bug in my head that I needed to build a CNC router. This is where I am today...

Ox Stainless with ballscrews

Feb 1, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.

Gantry CNC - Decisions made only to change over and over.

Jan 11, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is my first CNC build. As per the norm, I went in with months of research, planning, and resource gathering tied neatly together with a solid plan. As the path went on, the plan continued to change to accommodate issues I hadn't counted on. But, at the end of the road, the project reached completion, and I learned a ton along the way!

C Beam Served

Jan 23, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

C Beam Machine built in a server cab. Hopefully this keeps every thing enclosed , clean and quite ?

Modular DIY CNC Machine

Jan 21, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.

My CNC

Jan 5, 2018
Category
Cartesian Style CNC
Build Progress
Build Complete!

This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.

Dust Shoe for Kyo's Sphinx

Dec 27, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Dust Shoe design for a CNC router. Attaches to Chris Laidlaw's Mount design, with the DeWalt D26200 (which I think is the DWP 611 in the US).

Joe Harris's all metal CNC Router build

Dec 4, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm building a CNC router in my garage (almost finished!) and I'm keeping a video build log of the process in the hope it may be useful to others wanting to do the same. I don't have much in the way of fancy tools so expect a bit of innovation on the way!

OX CNC Router

Jul 20, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.

Warnke CNC Router

Sep 5, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.

C beam Larger and Stronger

Sep 3, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My first build based on the original C beam Sphinx. I’m not sure at this point what the final size will be. I have the parts from the c beam Sphinx and extra beams and lead screws to build up to 1000mm x 1000mm.

C Beam CNC+Laser

Aug 19, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

You will be following the assembly of the mechanical kit and how i integrate the electronics into the final build.

Mark 1

Jul 24, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My first attempt at building a CNC style machine. Overall my plan is to use the PlanetCNC breakout board and software to run the machine from a dedicated laptop/tablet.

Stock CNC Router

Aug 11, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!

C-Beam Machine XL

Feb 9, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.

1500x1000mm Adjustable Height

Jul 9, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.

C-Beam Machine upgrade to 1000mm x 1000mm

Mar 29, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)

My Belt & Pinion Drive CNC Router

Aug 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!

FRANKINATOR -- My CNC Router Built Around The C-Beam Rail

Feb 2, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...

Arctic_Stingray CNC

Jun 15, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.

1x1m Ooznest Ox

Jul 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Building my first router and I choose the ooznest Ox since it looks to be the latest and greatest among routers.

C-Beam Evolution MkII

May 12, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.

Contrariwise -- A C-Beam Router

Jun 22, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

A C-Beam router made almost entirely of standard parts. Electronics include an xPro v2 board and NEMA 23 motors. Cuts are made with a small 300W DC spindle. A pressure foot is used to minimize the need for workholding.

Stinger V Micro Mill

May 24, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)

OX Super "C" - Cpmpleted 11/02/16

Dec 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.

OX AI

Jan 24, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform

Need a catchy name - enlarging CNC

Mar 27, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts

OnyX-13

Feb 20, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my OX. There are many like it, but this one is mine. My OX is my best friend. It is my life. I must master it as I must master my life.....

Stainless OX kit

Dec 28, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits

Large C-Beam Sphinx style CNC Build

Jan 12, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Started my build of a large Sphinx style cnc Router. I wanted one to handle the Dollar Tree Foam Board (DTFB) so I am making this to handle 2' X 3'. This is my first endeavor for a CNC so I am learning as I go but there is one thing for sure.

Ooznest build - 1500mm x 1000mm

Apr 2, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.

Kruk 0.1

Nov 27, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.

Dream to practical

Nov 26, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.

My first build: a other OX CNC

Aug 31, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.

My 1st C-Beam Router

Aug 13, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.

Matt's Ox

Aug 8, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".

Metalguru's C-Beam 750

Jul 12, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a C-Beam build, fairly heavy duty, and 750mm x 750mm. Should be a good, sturdy machine that's relatively easy to assemble.

The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build

Jan 20, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice