Welcome to Our Community

Some features disabled for guests. Register Today.

C-Beam Machine upgrade to 1000mm x 1000mm

Discussion in 'CNC Mills/Routers' started by Cleyton Alencar, Mar 29, 2017.

  1. Cleyton Alencar

    Cleyton Alencar Well-Known
    Builder

    Joined:
    Jan 3, 2016
    Messages:
    15
    Likes Received:
    7
  2. Cleyton Alencar

    Cleyton Alencar Well-Known
    Builder

    Joined:
    Jan 3, 2016
    Messages:
    15
    Likes Received:
    7
    Hi, This is my first build, never published anything before. This build was based on Gino's Build and C-Beam Machine from OpenBuilds.

    C-Beam™ Machine - Plate Maker
    C-BEAM-GTC

    I really like how sturdy and reliable the C-Beam machine is, but I could use more build area. At the same time I would prefer not to have a moving build plate, but a moving gantry instead. This is my first plan of how I am going to build it based on a lot of research, usage and reference builds.

    Please let me know your thoughts.

    Appreciate it !
     
  3. DA98520

    DA98520 New
    Builder

    Joined:
    Sep 27, 2015
    Messages:
    5
    Likes Received:
    0
    I really like the addition of the rail on the outside of the C-beam along Y axis. Gave me an idea that I may incorporate in my build. Using that channel you could use a rubber seal to help block debris. Or possibly create a positive pressure inside to blow out air depending on setup.
     
    #3 DA98520, Jul 9, 2017
    Last edited: Jul 9, 2017

Share This Page