Everything Else
![Embroidery machine with XY belt and pinion drive.](https://openbuilds.com/data/article_images/l/0/691.jpg?t=1398202839)
Build Author
sausagePaws
Views
73140
Embroidery machine with XY belt and pinion drive.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
![DIY Embroidery Machine V2](https://openbuilds.com/data/article_images/l/8/8630.jpg?t=1560204694)
Build Author
sausagePaws
Views
1742737
DIY Embroidery Machine V2
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
![890KV OX RC spindle](https://openbuilds.com/data/article_images/l/0/411.jpg?t=1399994797)
Build Author
Robert Hummel
Views
68966
890KV OX RC spindle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is intended as a light alternative to the Dremel rotary tool.
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15111
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![Vinyl Application Roller table](https://openbuilds.com/data/article_images/l/5/5746.jpg?t=1507643871)
Build Author
Mac6986
Views
15601
Vinyl Application Roller table
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Build progress of custom roller table for applying graphics
![Naomi Wu's Automatic Bartender- BarBot!](https://openbuilds.com/data/article_images/l/6/6597.jpg?t=1519192094)
Build Author
Naomi Wu
Views
9067
Naomi Wu's Automatic Bartender- BarBot!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
![Lab Power Supply + Soldering Station](https://openbuilds.com/data/article_images/l/6/6861.jpg?t=1521067862)
Build Author
uGen
Views
16991
Lab Power Supply + Soldering Station
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
Adjustable Router Guide Template
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
![X Y Table OpenRail / V-Slot Build Examples](https://openbuilds.com/data/article_images/l/0/62.jpg?t=1389473342)
Build Author
Mark Carew
Views
67700
X Y Table OpenRail / V-Slot Build Examples
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Acro Pick And Place Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a machine for placing SMT components on PCBs. It is based on Acro system, off the shelf parts, and a number of custom 3D printed elements.
![V-Slot™ Belt & Pinion Example Build](https://openbuilds.com/data/article_images/l/0/97.jpg?t=1389473395)
Build Author
Mark Carew
Views
80816
V-Slot™ Belt & Pinion Example Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
V-Slot Miter Saw Stop
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A quick and simple saw stop build.
![The Floating Dust Shoe](https://openbuilds.com/data/article_images/l/6/6237.jpg?t=1516176994)
Build Author
Eric Jacobsson
Views
13122
The Floating Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Hydraulic lifting table
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I started this project without drawing. in itself this went fine with some minor adjustments. My profession is machine builder that might make it a little easier. I still enjoy it every day.
![Miter Saw Stop Block](https://openbuilds.com/data/article_images/l/6/6506.jpg?t=1518645861)
Build Author
rkugler
Views
5409
Miter Saw Stop Block
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Just starting a miter saw stop system. Any suggestions appreciated.
![Peristaltic pumps, Automatic Cocktail mixer](https://openbuilds.com/data/article_images/l/8/8444.jpg?t=1554341023)
Build Author
HuguesP
Views
5652
Peristaltic pumps, Automatic Cocktail mixer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
![CNC Line Boring Machine](https://openbuilds.com/data/article_images/l/3/3811.jpg?t=1470684250)
Build Author
Bridge Port
Views
7761
CNC Line Boring Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Cbeam Digital Mitre Saw Fence
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Work in progress.. but nearing completion :)
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
Table Saw Fence
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Trying to build a low cost table saw fence using v-wheels
![V-Slot Hand Cutting Jig](https://openbuilds.com/data/article_images/l/5/5796.jpg?t=1508932950)
Build Author
pek
Views
5141
V-Slot Hand Cutting Jig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
To help cutting v-slots with hand saw
![Goliath - CNC + 3D printer Hybrid](https://openbuilds.com/data/article_images/l/7/7908.jpg?t=1543269326)
Build Author
Joe Young
Views
4485
Goliath - CNC + 3D printer Hybrid
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
![Hotwire cnc Surfboards](https://openbuilds.com/data/article_images/l/9/9769.jpg?t=1667476118)
Build Author
2SIsurf
Views
4675
Hotwire cnc Surfboards
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Xl 2 axis foam cutter Eps Surfboard blanks Simple open concept but high production machine. Shape 3d case with open builds controller
OX-Based Self-Contaned HVLP Spray Booth
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A CNC HVLP spray booth based on OX.
The Almost Perfect 3 Way Mitre (with MakerLinks)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A quick and easy way to make a 3-way mitered corner using MakerLinks
Black Box/ Power supply brackets
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This items are so cool that they need to be together, so I decided to create brackets that connect both pieces together
Magnetic CNC Dust Shoe with LED lights and Camera*
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Making my own magnetic dust shoe with led lights and a camera. Showing my progress from beginning to now.
Flexible Axis Revolving Tool-holder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Drag knife and pen holder which mounts in spindle collet.
Automatic Sprayer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Automatic spray machine.
![Cricut Expressions 2 to ESP32 GRBL Control](https://openbuilds.com/data/article_images/l/7/7586.jpg?t=1542564944)
Build Author
MattR
Views
17073
Cricut Expressions 2 to ESP32 GRBL Control
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.
C-Beam Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A short description of the dust shoe I made for my machine.
![Router Sled V1.1 V-SLOT](https://openbuilds.com/data/article_images/l/9/9608.jpg?t=1603723779)
Build Author
Damian V-SLOT Poland
Views
11291
Router Sled V1.1 V-SLOT
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
We want to present you the new design of the device which is Router Sled. The whole structure is made of aluminum elements and ensures good quality of the device. We used V-SLOT aluminum profiles and OpenBuilds accessories for the construction. The instructional video can be found on our YouTube channel (subtitles in English soon)
![Swing Arm](https://openbuilds.com/data/article_images/l/9/9678.jpg?t=1607385200)
Build Author
OpenBuilds
Views
9038
Swing Arm
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Simple Swing Arm Build for the Modular Table Series. Create a simple vacuum swing arm that swings over your machine keeping your vacuum hose and router cord, etc. up and out of the way
![Pong CNC](https://openbuilds.com/data/article_images/l/3/3425.jpg?t=1462357169)
Build Author
Gerrald
Views
4761
Pong CNC
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
Archivist Quill Book Scanner
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
![CNC Control Box with VFD etc etc](https://openbuilds.com/data/article_images/l/4/4354.jpg?t=1486815770)
Build Author
Savvas
Views
16582
CNC Control Box with VFD etc etc
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
2 GANTRY CNC HOTWIRE MACHINE
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A 2 independent gantry affordable hotwire machine.
Open Builds C-Beam K-cup holder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Making use of c-beam I have had left over from projects.
![OB 2x72 Belt Grinder](https://openbuilds.com/data/article_images/l/8/8421.jpg?t=1554164244)
Build Author
Ariel Yahni
Views
5341
OB 2x72 Belt Grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
![The FEEDBACK FRACTAL Build](https://openbuilds.com/data/article_images/l/8/8518.jpg?t=1557431974)
Build Author
Cortellini
Views
3268
The FEEDBACK FRACTAL Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
Massive Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
CNC Hot Wire Foam Cutter. Lathe, Turntable and 4 axis Cutter. Can cut XPS and EPS.
![V-Slot Ventilator](https://openbuilds.com/data/article_images/l/9/9309.jpg?t=1587332585)
Build Author
OpenBuilds
Views
5475
V-Slot Ventilator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
![DIY Slab Flattening Mill](https://openbuilds.com/data/article_images/l/9/9396.jpg?t=1593609079)
Build Author
Damian V-SLOT Poland
Views
14153
DIY Slab Flattening Mill
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
V-SLOT profiles and OpenBuilds accessories give us many possibilities. We decided to build a manual ROUTER SLED using only components of the OpenBuilds system. The design is simple to build, construction takes little time, and the frame is easy to transport.
PROTODERA 5-axis CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.
![V-Slot Cutting System](https://openbuilds.com/data/article_images/l/2/2138.jpg?t=1431475871)
Build Author
Kyo
Views
11234
V-Slot Cutting System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Spindle cooling setup
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Cooling system for water cooled spindle.
![SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer](https://openbuilds.com/data/article_images/l/4/4275.jpg?t=1483369813)
Build Author
Venturebit
Views
10542
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Absolute positioning hardware and software
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Absolute linear positioning using deBruijn sequences.
![CNC ESS Controls System](https://openbuilds.com/data/article_images/l/8/8144.jpg?t=1548191018)
Build Author
Jacob Lotter
Views
4183
CNC ESS Controls System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
![Scroll-saw Spiral Cutter](https://openbuilds.com/data/article_images/l/9/9872.jpg?t=1616597739)
Build Author
RSch
Views
3238
Scroll-saw Spiral Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Attached to a scroll saw you can cut nested wooden spirals with this jig. Make two, three, four ... interlocking spirals that unwind/unscrew. Fascinating toys or art objects!
![Portable Foam Cutter](https://openbuilds.com/data/article_images/l/1/1191.jpg?t=1412514842)
Build Author
Mohsen Abbasi
Views
7080
Portable Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A portable foam cutter to make your forms everyware using a LiPo Battery.
CNC Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.
4-axis C-Beam Hot Wire Wing cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
4-axis CNC Hot wire foam wing cutter
V-Slot Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
v-slot linear actuator build.
![Mining Rig](https://openbuilds.com/data/article_images/l/7/7201.jpg?t=1529396612)
Build Author
mytechno3d
Views
4257
Mining Rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Crypto Mining rigs with vslot rail
Pick and place
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Openbuilds Pick and Place using ideas from OpenPNP Frame work is from the Openbuilds Part store using 1000mm C beams and vslot 40x40 for support Surface is 3/4 " Particle board
Gärschrank
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A cabinet to keep a constant temperature for pizza or bread mother dough to grow.
![V-Slot™ X -Y Stage Hidden Acme Rod Example](https://openbuilds.com/data/article_images/l/0/66.jpg?t=1389473440)
Build Author
Mark Carew
Views
51446
V-Slot™ X -Y Stage Hidden Acme Rod Example
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
PnP 4 axis small/fast machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
![COTSPnP](https://openbuilds.com/data/article_images/l/2/2089.jpg?t=1430514732)
Build Author
JoeH
Views
6677
COTSPnP
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.
CNC Glass Grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
![The Almost Perfect 3 Way Mitre (with Angle Corner Connectors)](https://openbuilds.com/data/article_images/l/4/4860.jpg?t=1491493915)
Build Author
Peter Van Der Walt
Views
5968
The Almost Perfect 3 Way Mitre (with Angle Corner Connectors)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A quick and easy way to make a 3-way mitered corner using Corner Connectors
![Ball Trajectory Machine](https://openbuilds.com/data/article_images/l/7/7887.jpg?t=1542989748)
Build Author
James Evanko
Views
3102
Ball Trajectory Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
![CNC Coating Machine](https://openbuilds.com/data/article_images/l/7/7953.jpg?t=1543672707)
Build Author
Vegard Humlen
Views
3811
CNC Coating Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
Indoor Drumline Props
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Triangular Towers
Cnc od grinder and thread grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a totally original build of an od id grinder and thread grinder, I hope.
![Mustardo - The Mustard Bot](https://openbuilds.com/data/article_images/l/9/9361.jpg?t=1595382429)
Build Author
Quinnthouzand
Views
2736
Mustardo - The Mustard Bot
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
cnc back stop for brake press
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
back stop build
![Rotomolder](https://openbuilds.com/data/article_images/l/0/618.jpg?t=1395618265)
Build Author
John J Talavera
Views
6812
Rotomolder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple low cost rotomolder.
![Universal stand-alone filament spool holder (Fully 3D-printable)](https://openbuilds.com/data/article_images/l/1/1505.jpg?t=1418586739)
Build Author
CreativeTools
Views
7030
Universal stand-alone filament spool holder (Fully 3D-printable)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.
Small drill press fence
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A small build using some small vslot scrap piece which shows the versatlity of the v-slot system
C-Beam bellows
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Making a bellows to cover a C-beam to prevent swarf from gumming up the works.
![Sheethexapod](https://openbuilds.com/data/article_images/l/4/4220.jpg?t=1481407627)
Build Author
Edgar Robles
Views
3276
Sheethexapod
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
C-beam upgrades to my power tools
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Just some repairs and upgrades to my drill press and mitre saw using c-beam.
![Nightfuel](https://openbuilds.com/data/article_images/l/6/6368.jpg?t=1517718349)
Build Author
Rodrigo Gonzalez
Views
2874
Nightfuel
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
DIN 35mm -like quick clip for 20mm extrusion
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A half baked idea for mounting electrics and electronics using a 35mm-DIN-rail-like mounting.
![Humanitarian Medical Instrument Sterilizer Made from RepRap Parts](https://openbuilds.com/data/article_images/l/7/7877.jpg?t=1542856650)
Build Author
David Hartkop
Views
2168
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
![Clear Acrylic Dust Shoe](https://openbuilds.com/data/article_images/l/8/8392.jpg?t=1552523209)
Build Author
Cosmosteel
Views
3676
Clear Acrylic Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Sim Racing rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds
![MakerSL MSL-65 Manual Coffee Grinder Stand](https://openbuilds.com/data/article_images/l/9/9048.jpg?t=1576156656)
Build Author
Sonny Lowe
Views
5344
MakerSL MSL-65 Manual Coffee Grinder Stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
![Microwave Filter Tuner](https://openbuilds.com/data/article_images/l/9/9278.jpg?t=1586378538)
Build Author
Braden Masse
Views
2571
Microwave Filter Tuner
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.
T Nut Holder for V Slot
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a T Nut Holder for OpenBuilds V Slot System. Useful when you want to keep t nuts in place, for example when you're mounting something vertically.
![OpenBuilds Table Series](https://openbuilds.com/data/article_images/l/9/9585.jpg?t=1606518488)
Build Author
OpenBuilds
Views
19316
OpenBuilds Table Series
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds Table Series offers a modular table structure that grows with your needs.
Remote Toiler Flusher!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project provides an easy method for my granddaughter to use the facilities in the smallest room of the house! The toilet cistern is located in the garage and was originally manually activated by a pushbutton connected via a cable. The location of the pushbutton - combined with the stiffness of the mechanism made it tricky for her to use. This project provides a solution to the problem.
![OpenPull From CNC Kitchen.. attempt](https://openbuilds.com/data/article_images/l/10/10239.jpg?t=1645386160)
Build Author
Gary Caruso
Views
1817
OpenPull From CNC Kitchen.. attempt
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
![MakerSL MSL-7 Laser Cut Tape Dispenser](https://openbuilds.com/data/article_images/l/3/3368.jpg?t=1460023548)
Build Author
Sonny Lowe
Views
5017
MakerSL MSL-7 Laser Cut Tape Dispenser
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
![Chrysalis: An Enclosure for TAZ 6 3d Printers](https://openbuilds.com/data/article_images/l/4/4875.jpg?t=1491766218)
Build Author
Jonathon Duerig
Views
6225
Chrysalis: An Enclosure for TAZ 6 3d Printers
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
Screen Mesh Stretching
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.
Galvos
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
3d printable galvos
Small Slot Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A build to cut .008 inch slots into JB Weld.
Pick and place
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Pick and place based on the Openbuilds ACRO 20x20
Filament winder ( carbon fiber )
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Carbon fiber filament winder
SharkBits Holder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Get organized with the SharkBits Holder!
MIT E-Vent | MIT Emergency Ventilator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Ventilator prototype based of OpenBuilds Stock parts
![CNC FOR EVERYONE, THE DUCK!](https://openbuilds.com/data/article_images/l/0/734.jpg?t=1399679659)
Build Author
John J Talavera
Views
7464
CNC FOR EVERYONE, THE DUCK!
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Brewery tank supports
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Trying to design modular and evolutive supports for my brewery tanks.
![Air assist/fume collector for Diode Laser Engraver](https://openbuilds.com/data/article_cat_images/l/0/295.jpg?t=0)
Build Author
Anthony Bolgar
Views
4878
Air assist/fume collector for Diode Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a work in progress
Clock repair stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Open source clock movement stand
![High Intensity Dive Light](https://openbuilds.com/data/article_cat_images/l/0/295.jpg?t=0)
Build Author
Robert Huxford
Views
2905
High Intensity Dive Light
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
![CNC Auto-pipette](https://openbuilds.com/data/article_images/l/8/8784.jpg?t=1567236148)
Build Author
Sir Bagels
Views
2103
CNC Auto-pipette
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)